• 대한기계학회논문집A
• /
• 제38권11호
• /
• pp.1193-1199
• /
• 2014

서비스 로봇이 충돌안전성을 확보한 상태에서 고속 주행 임무를 수행하기 위해서는 동적 장애물의 속도를 고려한 궤적 계획이 필요하다. 정적 장애물만을 고려한 상태에서 궤적을 계획하는 경우 장애물과의 상대속도로 인해서 로봇이 장애물과 충돌할 수 있다. 본 연구에서는 동적 장애물의 속도를 고려한 궤적시간조정기법을 제안한다. 제안된 기법을 통해서 기존에 생성된 궤적의 시간을 조정해서 장애물 회피가 가능한지를 평가할 수 있다. 만일 회피가 불가능할 경우 생성된 경로가 아닌 다른 경로를 선택할 수 있다. 모의 시험 결과를 통해서 제안된 기법을 통해서 짧은 시간 내에 장애물 회피를 수행할 수 있음을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.101-106
• /
• 2003

In the area of tracking control, it is important to design not only the controllers but also the trajectories to which a system has to follow. $5^{th}$ order polynomial is often used with constraints of initial and final states. Smooth ending with possible minimum time is important for many systems because of vibration or jerky motions. Examples are increased with development of technology in smaller, more accurate systems. On the base of a polynomial like trajectory generation method from a paper in ACC2002 and RIC(Robust Internal-loop Compensator) control scheme of Robotics and Bio-mechanics lab. of POSTECH, generalized and expanded polynomial like trajectory generation method is showed.

• 한국공작기계학회논문집
• /
• 제13권3호
• /
• pp.126-132
• /
• 2004

This paper proposed trajectory tracking control based on genetic algorithm. Trajectory tracking control scheme are real coding genetic algorithm(RCGA) and back-propagation algorithm(BPA). Control scheme ability experience proposed simulation. Stable tracking control problem of mobile robots have been studied in recent years. These studies have guaranteed stability of controller, but the performance of transient state has not been guaranteed. In some situations, constant gain controller shows overshoots and oscillations. So we introduce better control scheme using real coding genetic algorithm and neural network. Using RCGA, we can find proper gains in several situations and these gains are generalized by neural network. The generalization power of neural network will give proper gain in untrained situation. Performance of proposed controller will verity numerical simulations and the results show better performance than constant gain controller.

• 동력기계공학회지
• /
• 제6권3호
• /
• pp.49-56
• /
• 2002

This study suggests a trajectory tracking controller composed of an input output linearization compensator and a linear controller. The input output linearization compensator is derived from the nonlinear equations of a pneumatic control system and it algebraically transforms a nonlinear system dynamics into a linear one, so that input output characteristics of the control system is linearized regardless of the variation of the operating point and linear control techniques can be applied. The results of nonlinear simulations show that the proposed controller tracks the given trajectories more accurately than a state feedback controller does.

• Journal of Advanced Marine Engineering and Technology
• /
• 제29권8호
• /
• pp.842-848
• /
• 2005

The decoupling control using state feedback was once intensively studied during 1960's by many researchers. However, this control scheme was sensitive to the disturbance and Parameter variations. SMC(sliding mode control) is known as a robust control methodology to overcome such a disturbance. In this paper. the decoupling control by means of SM(sliding mode) for a trajectory control of a two-degrees-of- freedom manipulator was discussed. The position and velocity of manipulator tip were adopted to compose a nonlinear error functions. The reference inputs of the controller can be decided by switching function combined with the desired position and velocity. Simulation result is provided to verify the effectiveness of the proposed control scheme.

• International Journal of Aeronautical and Space Sciences
• /
• 제10권2호
• /
• pp.12-22
• /
• 2009

This paper deals with the State-Dependent Riccati Equation (SDRE) Technique for the design of rotorcraft waypoint guidance. To generate the flight trajectory through multiple waypoints, we use the trigonometric spline. The controller design and its validation is based upon a level 2 simulation rotorcraft model and the designed SDRE controller is applied to the trajectory tracking problems. To verify the designed guidance law, the simulation environment of high fidelity rotorcraft model is developed using three independent PCs. This paper focuses on the validation of rotorcraft waypoint guidance law which is designed by using SDRE Controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1992년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 19-21 Oct. 1992
• /
• pp.599-606
• /
• 1992

A manipulator system that needs significantly large workspace volume and high payload capacity has greater link flexibility than typical industrial robots and teleoperators. If link flexibility is significant, position control of the manipulator's end-effector exhibits the nonminimum phase, noncollocated, and flexible structure system control problems. This paper addresses inverse dynamic trajectory planning issues of a flexible manipulator. The inverse dynamic equation of a flexible manipulator was solved in the time domain. By dividing the inverse system equation into the causal part and the anticausal part, the inverse dynamic method calculates the feedforward torque and the trajectories of all state variables that do not excite structural vibrations for a given end-point trajectory. Through simulation and experiment with a single-Unk flexible manipulator, the effectiveness of the inverse dynamic method has been demonstrated.

• 제어로봇시스템학회논문지
• /
• 제4권4호
• /
• pp.479-486
• /
• 1998

In this paper, the design and the implementation of a robust adaptive controller for trajectory tracking of robot manipulator is presented. The proposed control scheme ensures that tracking errors are converged to some boundaries in the presence of a state-dependent input disturbances as well as the ideal case without any prior knowledge of the robot manipulator parameters. The 3 DOF robot manipulator including actuator dynamics is used for the implementation of the proposed control scheme. The experimental results show that the proposed control scheme is valid for trajectory tracking of the robot manipulator.

• 한국정밀공학회지
• /
• 제15권3호
• /
• pp.157-167
• /
• 1998

In this paper it is purpose that reduces joint torques and their rate of change through optimizing trajectory planning of biped walking machine. The motion of biped walking machine is divided into leg motion for walking and body motion for keeping balance. The leg motion is planned by three phases, that are deploy, swing, and place phases, in terms of the state of foot against floor. The distribution of time assigned to each phase is optimized and that causes leg joint torques and their rate of change to minimize. The body notion is produced by using optimal control theory which minimizes body joint torques and satisfies Z.M.P. constraints defined as region of each phase.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.331-333
• /
• 1994

A learning method for induction motor trajectory using neuro-fuzzy networks (NFN) based on fusion of fuzzy logic theory and neural networks is proposed. The premise and consequent parameters of the NFN affecting the controllers performances are modified during the learning stages by the proposed learning method to implement an optimal controller only with pre-determined target trajectory and the least amount of knowledge about an induction motor. The induction motor position control system is simulated to verify the effectiveness of the learned NF controller(NFC). The simulation results shows that the proposed learning method has good dynamic performance and small steady state error.