• 대한전기학회논문지
• /
• 제40권3호
• /
• pp.316-325
• /
• 1991

This paper presents the design of a new sliding mode controller to improve the rate of convergence by Lyapunov's stability analysis. The proposed controller shows that the elimination of the steady state position errors can be achieved by replacing the desired trajectory by the virtual reference trajectory. The proposed control scheme which consists of the upper bounded and estimated values of eac term of the manipulator dynamic equation does not require good knowledge of the parameters and the computation of matrix inversion. The performance of proposed controller is evaluated by the simulation for a two-link manipulator.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 추계학술대회 논문집 학회본부
• /
• pp.337-341
• /
• 1989

This theory has fast response and low overshoot by transforming its structure and this system may have new character which did not appear in this system. The VSS system transform its structure by switching logic. Then, the state trajectory is to sliding along the switching line to the phase-plane orgin. The phase trajectory is known as the sliding mode of this controller. This paper performed position control in the theory and analysised the change in variable loads.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.137.3-137
• /
• 2001

Many locomotion purpose robots are being built and are under research such as mobile manipulator and biped humanoid robot, etc. Dynamic posture stability of these robots is based on the ZMP point. For getting stable ZMP trajectory, some method has been developed but is too complex and time consuming which leads to inability in generating on-line ZMP trajectory. In this paper, we give a qualitative study about behavior of ZMP in biped walking robot through visualization. This result gives intuitive understanding about behavior of ZMP under various robot state.

• Journal of information and communication convergence engineering
• /
• 제2권3호
• /
• pp.198-201
• /
• 2004

In this paper, the discrete optimal control is made to have the robust property of Sliding mode controller. A augmented system with a virtual state is constructed for this objective and noble sliding surface is constructed based on this system. The sliding surface is the same as the optimal control trajectory in the original system. The states follow the optimal trajectory even if there exist uncertainties. The reaching phase problem of sliding mode control is disappear in this method.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.22.4-22
• /
• 2001

In this paper, the discrete optimal control is made to have the robust property of sliding mode controller. A augmented system with a virtual state is constructed for this objective and noble sliding surface is constructed based on this system. The sliding surface is the same as the optimal control trajectory in the original system. The states follow the optimal trajectory even if there exist uncertainties. The reaching phase problem of sliding mode control is desappear in this method.

• 한국항공우주학회지
• /
• 제36권12호
• /
• pp.1152-1162
• /
• 2008

본 논문은 헬리콥터 비선형 제어기 설계를 위한 State-Dependent Riccati Equation (SDRE) 기법을 다루었다. SDRE 제어기법은 비선형 운동방정식에 대해 선형 시스템과 같은 구조를 갖는 방정식을 필요하기 때문에 State-Dependent Coefficient (SDC) factorization 기법을 개발하여 비선형 운동방정식으로부터 이러한 구조의 방정식을 유도하였다. SDRE제어기를 온라인상에서 설계하는데 필요한 대수 Riccati 방정식의 효율적인 수치해법을 연구하였다. 본 연구에서 제안된 수치기법을 헬리콥터의 경로추종문제로 적용하였으며, 고 신뢰도의 헬리콥터 수학적 모델을 적용하여 실시간으로 SDRE 제어기를 설계할 수 있는 방안을 제안하였다.

• 한국항행학회논문지
• /
• 제7권2호
• /
• pp.162-170
• /
• 2003

In this paper, we propose a robust controller for trajectory control of n-link robot manipulators using feature based on visual feedback. In order to reduce tracking error of the robot manipulator due to parametric uncertainties, integral action is included in the dynamic control part of the inner control loop. The desired trajectory for tracking is generated from feature extraction by the camera mounted on the end effector. The stability of the robust state feedback control system is shown by the Lyapunov method. Simulation and experimental results on a 5-link robot manipulator with two degree of freedom show that the proposed method has good tracking performance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.675-678
• /
• 1989

This paper proposes two types of the preview algorithms to predict the joint velocities and joint positions, and deals with a control approach using the preview algorithms for the precise trajectory control. Specifically, a predictor an the form of discrete time state equations is proposed based on the robot dynamics model linearized by the computed torque method. And another state predictor is proposed by the beat line fitting in the least square sense, where present joint velocities and positions and several past positions are employed. Then computer simulations are performed for the SCARA robot with two d.o.f. to show the validities of the proposed algothrithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.421-424
• /
• 1987

Recently, the problem associated with the achievement of desired trajectories for non-linear robotic manipulatory systems are researched. The control system which is designed for this robot manipulator, poses a number of severe problem. The methods proposed to deal with the problem fall loosely into three main classes : "direct" "adaptive", "anthropomorphic". Besides there is an approach which is described based upon the application of optimal control theory. In this paper, using the optimal theory, we choose error-coordinate, between the desired trajectories and the practical as the state values, and determine the control law U which minimize a corresponding performance criterion. Let's consider the robotic arm proposed by Freund and set up the deviations of it's trajectory as a measure of performance. To find the optimal control law $U^*$ and the next state value which need to obtain $U^*$ here, we should introduced the conjugate gradient algorithm and the Runge Kutta method.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 하계학술대회 논문집 G
• /
• pp.2348-2350
• /
• 1998

The hybrid control system for a wheeled mobile robot with nonholonomic constraints to perform a cluttered environment maneuver is proposed. The proposed hybrid control system consists of a continuous state system for the trajectory control, a discrete state system for the motion and orientation control, and an interface control system for the interaction process between the continuous dynamics and the discrete dynamics The continuous control systems are modeled by the switched systems with the control of driving wheels, and the digital automata for motion control are modeled and implemented by the abstracted motion of mobile robot. The motion control tasks such as path generation, motion planning, and trajectory control for a cluttered environment are investigated as the applications by simulation studies.