• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.2
• /
• pp.102-106
• /
• 2018

Recently, there has been an increasing interest in the use of graphene as electrode materials for supercapacitors. In this regard, graphene oxide (GO) films were prepared using GO slurry obtained by dispersing GO powder in deionized (DI) water. The degree of dispersion of GO powder in DI water depends on the concentration of GO slurry, pH, impurity content, GO particle size, types of functional groups contained in GO, and manufacturing method of GO powder. In this study, the dispersivity of the GO powder was improved by adjusting the pH using only DI water (without additives), and a uniform GO film was obtained. The GO film was reduced by exposure to xenon intense pulsed light for a few milliseconds, and the reduced GO film was used as electrodes of a supercapacitor. The supercapacitor was characterized using cyclic voltammetry (CV), charge-discharge cycle, and electrochemical impedance spectroscopy measurements, and the specific capacitance of the supercapacitor was found to be ~140 F/g from the CV data.

• Bulletin of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.641-644
• /
• 2005

Nucleophilic addition reactions of benzylamines $(XC_6H_4CH_2NH_2)\;to\;{\beta}$-cyanostilbenes ($YC_6H_4CH=C(CN)C_6H_4$Y’) have been studied in acetonitrile at 30.0 oC. A greater degree of N-$C_{\alpha}$ bond formation (larger ${\beta}_X$) is obtained with a stronger electron-withdrawing substituent in either ${\alpha}-\;(\delta\sigma_Y\;{\gt}\;0)\;or\;{\beta}-ring\;(\delta\sigma_{Y'}\;{\gt}$ 0). A stronger charge development is observed in the TS on $C_{\beta}\;(\rho_{Y'}$= 1.06 for X=Y=H) rather than on $C_{\alpha}\;(\rho_{Y}$ = 0.62 for X=Y’H) indicating the lag in the resonance development into the activating group (CN) on $C_{\beta}$ in the transition state. Similarly, the magnitude of $\rho$$_{XY'}$(−0.72) is greater than $\rho_{XY}$ (−0.66) due to a stronger interaction of the nucleophile with $\beta$-ring than $\alpha$-ring. The positive sign of $\rho_{YY'}$correctly reflects $\pi$ bond cleavage between the two rings in the TS. Relatively large kinetic isotope effects ($k_H/k_D\;{\geq}$ 2.0) involving deuterated nucleophiles ($XC_6H_4CH_2ND_2$) suggest a four-membered cyclic TS in which concurrent N-C$_{\alpha}$ and H(D)-C$_{\beta}$ bond formation occurs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.1
• /
• pp.217-222
• /
• 2018

The deterioration of the Battery is decided by SoC and SoH. To determine Battery deterioration, SoC measurement method of Battery by Transfer Function was studied. The SoC of the Battery changes most greatly in the 1Hz band where the DC resistance is detected. but it is a narrow band to observe, therefore, the observation band was moved to 1kHz using the tone busrst signal. Welch's method was used to observe the frequency domain characteristics of the signal. As a result of the spectral estimation, it was confirmed that the response signal of the battery is 1dB difference when the SoC is 40%, 60%, and 80%, respectively. Through this, Proposed the new method of Battery SoC measurement.

• Journal of Radiation Protection and Research
• /
• v.9 no.2
• /
• pp.55-60
• /
• 1984

The optimum etching condition of allyl diglycol carbonate (CR-39) for detecting the 60 MeV N-ions was determined as $70^{\circ}C$, 20% NaOH for 130min, by considering the variations of track density and diameter. Under these conditions, the maximum detectable track density was $1.7{\times}10^7tr/cm^2$. Track densities were linearly increased with increase of the total charge of the incident 60 MeV N-ions. By considering the scattring of N-ions as the Rutherford elastic scattering of point source, the measured relative probability was well consistent with the calculated value. The detection efficiency of CR-39 was in the range of 54-41% for 60 MeV N-ions of 12 nC-100 nC.

• Journal of the Korean Chemical Society
• /
• v.18 no.6
• /
• pp.400-407
• /
• 1974

Steady-state anodic and cathodic polarization curves were developed for the Al electrode in 60 mole %$AlCl_3$-40 mole % NaCl at $180^{\circ}C$$453^{\circ}K$). Ohmic resistance contributed substantially to the anodic polarization at current densities greater than 50 mA/$CM^2$ even with capillary tip placed close to the electrode. This could not be rationalized from the resistivity of the melt, which would lead to a much smaller polarization. It was therefore concluded that a layer of high resistance $AlCl_3$ (or $AlCl_3$-rich melt) formed close to the anode surface. From the IR-corrected anodic Tafel and Allen-Hickling plots an apparent anodic charge-transfer coefficient of ${\alpha}_a$ = (2.3 RT/F)(d log i/d${\eta}$) = $1.5{\pm}0.25$ was obtained. At cathodic current densities greater than approximately 30 mA/$cm^2$, slow ion diffusion and dendrite growth both interfered with the measurement of kinetic parameters.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.5357-5365
• /
• 2013

In this paper, we propose that a model based design for a electric tractor system by using ASM(Automotive Simulation Models). Before developing a realistic electric tractor, it is essential that defining the capacities of power sources and optimizing the parameters of electric tractor. In additionally, because the electric tractor must have not only driving function but also working function, two PMSM are used at electric tractor. ASM which is based on simulink and Carsim were used to design a electric system and powertrain of electric tractor. For verifying the electric tractor system, we compared the design parameters such as max power, state of charge, drive distance, velocity which were carried out by the simulation and experimental method. The predicted results by the development model were in good agreement with the simulation results. According to simulation of tractor, it is possible to arrange the advanced research of dynamical characteristic of tractor and present the guidelines for the electrical driving system.

• Bulletin of the Korean Chemical Society
• /
• v.35 no.1
• /
• pp.177-181
• /
• 2014

Pseudo-first-order rate constants ($k_{obsd}$) have been measured spectrophotometrically for the reactions of Y-substituted-phenyl benzoates (5a-j) with potassium ethoxide (EtOK) in anhydrous ethanol at $25.0{\pm}0.1^{\circ}C$. The plots of $k_{obsd}$ vs. [EtOK] curve upward regardless of the electronic nature of the substituent Y in the leaving group. Dissection of $k_{obsd}$ into the second-order rate constants for the reactions with the dissociated $EtO^-$ and ion-paired EtOK (i.e., $k_{EtO^-}$ and $k_{EtOK}$, respectively) has revealed that the ion-paired EtOK is more reactive than the dissociated $EtO^-$. The Br${\phi}$nsted-type plots for the reactions with the dissociated $EtO^-$ and ion-paired EtOK exhibit highly scattered points with ${\beta}_{lg}$ = -$0.5{\pm}0.1$. The Hammett plots correlated with ${\sigma}^o$ constants result in excellent linear correlations, indicating that no negative charge develops on the O atom of the leaving Y-substituted-phenoxide ion in transition state. Thus, it has been concluded that the reactions with the dissociated $EtO^-$ and ion-paired EtOK proceed through a stepwise mechanism, in which departure of the leaving group occurs after the RDS, and that $K^+$ ion catalyzes the reactions by increasing the electrophilicity of the reaction center through a four-membered cyclic TS structure.

• Proceedings of the Korea Crystallographic Association Conference
• /
• 2002.11a
• /
• pp.16-16
• /
• 2002

The presently commercialized lithium-ion batteries use layer structured LiCoO₂ cathodes. Because of the high cost and toxicity of cobalt, an intensive search for new cathode materials has been underway in recent years. Recently, a concept of a one-to-one solid state mixture of LiNO₂ and LiMnO₂, i.e., Li[Ni/sub 0.5/Mn/sub 0.5/]O₂, was adopted by Ohzuku and Makimura to overcome the disadvantage of LiNiO₂ and LiMnO₂. Li[Ni/sub 0.5/Mn/sub 0.5/]O₂ has the -NaFeO₂ structure, which is characteristic of the layered LiCoO₂ and LiNiO₂ structures and shows excellent cycleability with no indication of spinel formation during electrochemical cycling. Layered Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials with high homogeneity and crystallinity were synthesized using a mechanical alloying method. The Li[Ni/sub 0.475/Co/sub 0.05/Mn/sub 0.475/]O₂ electrode delivers a high discharge capacity of 187 mAh/g between 2.8 and 4.6 V at a high current density of 0.3 mA/㎠(30 mA/g) with excellent cycleability. The charge/discharge and differential capacity vs. voltage studies of the Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂ (x = 0.5 and 0.475) materials showed only one redox peak up to 50 cycles, which indicates that structural phase transitions are not occurred during electrochemical cycling. The magnitude of the diffusion coefficients of lithium ions for Li[Ni/sub x/Co/sub 1-2x/Mn/sub x/]O₂(x = 0.5 and 0.475) are around 10/sup -9/ ㎠/s measured by the galvanostatic intermittent titration technique (GITT).

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.15 no.1
• /
• pp.13-21
• /
• 2001

The discharge characteristics of 3 electrcdes AC surface discharge plasma display were analyzed. For an unstable state of the discharge which appeared at the maximum discharge voltage, it is found that a parbal erase of the wall charge by the second discharge is a cause. Based on the second discharge, new operation margin considering the interrelation between the address discharge and the display discharge was defined and the validity of it was verified by the experiments. It is necessary to decrease the acklress pulse width for high-speed addressing. However, the operation margin of the ackIress pulse decreases as the pulse width of it becomes narrower. If the address pulse width is wider than l[ps], the operation margin of the display discharge is not related to the address pulse width. From the experimental result, image or 8bit 253 gray level was displayed on PDP with the cell structure of the HDTV class by using the high-speed address ADS drive methcd with pulse width of $1[{\mu}s]$ and the brightness of $560[cd/m^2]$ was obtained. ained.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.14 no.5
• /
• pp.65-72
• /
• 2006

In new generation vehicle technologies, a fuel cell vehicle becomes more important, by virtue of their emission merits. In addition, a fuel cell is considered as a major source to generate the electricity for vehicles in near future. This paper focuses on modeling of not only an electric vehicle and but also a fuel cell vehicle to estimate performances. And an EV cart is manufactured to verify the modeling. Speed, voltage, and current of the vehicle and modeling are compared to estimate them at acceleration test and driving mode test. The estimations are also compared with the data of the Ballard Nexa fuel cell stack. In order to investigate a fuel cell based vehicle, motor and fuel cell models are integrated in a electric vehicle model. The characteristics of individual components are also integrated. Calculated fuel cell equations show good agreements with test results. In the fuel cell vehicle simulation, maximum speed and hydrogen fuel consumption are estimated. Even though there is no experimental data from vehicle tests, the vehicle simulation showed physically-acceptable vehicle characteristics.