• Journal of Institute of Control, Robotics and Systems
• /
• v.20 no.5
• /
• pp.533-536
• /
• 2014

In this paper, a near optimal decentralized observer-controller design method is proposed for ramp metering systems based on SDRE (State Dependent Riccati Equation) approach. The optimal nonlinear observer gain is parameterized in terms of the solution matrix of an SDRE. This paper gives a simple algorithm to compute the near optimal observer gain. The optimal control design problem is also considered. Finally, numerical simulation results are given to illuminate the effectiveness and practicality of the proposed design method.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.592-597
• /
• 2003

In this paper, some differential geometric conditions for the observer using a recurrent neural network are provided in terms of a stochastic nonlinear system control. In the stochastic nonlinear system, it is necessary to make an additional condition for observation of stochastic nonlinear system, called perfect filtering condition. In addition, we provide a observer using a recurrent neural network for the observation of a stochastic nonlinear system with the proposed observation conditions. Computer simulation shows that the control performance of the stochastic nonlinear system with a observer using a recurrent neural network satisfying the proposed conditions is more efficient than the conventional observer as Kalman filter

• IEMEK Journal of Embedded Systems and Applications
• /
• v.12 no.5
• /
• pp.311-318
• /
• 2017

A reduced order observer is developed for depth control of a hybrid underwater glider which combines the good aspects of a conventional autonomous underwater vehicle and a underwater glider. State variables include the center of gravity of the robot and the weight of the buoyancy bag, which can not be directly measured. By using the mathematical model and available information such as directional velocities, accelerations, and attitudes, we developed a Luenberger's reduced order observer to estimate the center of gravity and the buoyancy weight. By simulations using Matlab/Simulink, the efficiency of the proposed observer is shown, where a LQR controller using full state variables is adopted as a depth controller.

• Proceedings of the KIEE Conference
• /
• 2006.04b
• /
• pp.229-231
• /
• 2006

The paper presents a sensorless speed control of interior permanent magnet synchronous motors using an adaptive integral binary observer in view of composition with a main loop regulator and an auxiliary loop regulator. The binary observer has a property of the chattering alleviation in the constant boundary layer; however, the steady state estimation accuracy and robustness are dependent upon with width of the constant boundary. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral dynamic to the switching hyperplane equation.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.606-608
• /
• 1996

In this paper, a new control scheme based on deadbeat control with disturbance observer for voltage controlled Inverter system is proposed. The inverter system is modelled as the 4th-order system treating R load current variation caused by disturbance. So the disturbance observer exists in the state observer. By using the pole placement strategy, the observer estimates the state and disturbance variable of the next sampling instant. Simulation results so show that The proposed scheme has robust feature against disturbance.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.10a
• /
• pp.470-473
• /
• 1995

There exist two critical in application of the magnetic bearing system. One is the control axis interference caused by gyroscopic effect and the other is the vibration caused by the unbalance on the rotor. To solve both problems at the same time, first, a centralized full-state feedback controller based on the LQR control theory was designed to compensate for the gyroscopic effect. Second, disturbance rejection control input based on the observer was designed to avoid the vibration causer by the unbalanced rotor. Balancing input computer accroding to LQR and output of the observer were derived in term of rotational speed. Effectiveness of the on-line balancing was verified through numerical simulation. The developed observer-based controller was also applied to the linear and nonlinear magnetic bearing systems.

• 제어로봇시스템학회:학술대회논문집
• /
• 1993.10a
• /
• pp.589-594
• /
• 1993

This paper presents a fault detection strategy that discriminates the faulty sensor and that detects the component fault using a bank of observers for the system in which sensor fault and component fault can occur simultaneously. Observers as many as the number of measurements are designed, and each observer uses measurements excluding sequentially one measurement, to estimate the state variables. The faulty sensor can be found out by comparing each state variable from different observer. Next, component fault can be detected by using measurements from the sensors excluding the faulty sensor. The suggested strategy is applied to a nonisothermal, series reaction with unknown reaction kinetics in a CSTR. This strategy is found out to perform well even in the case that the sensor and component fault occur simultaneously. Since each observer is designed to be independent of reaction kinetics, this strategy is not affected by the model uncertainty and nonlinearity of the reaction kinetics.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.33B no.2
• /
• pp.28-36
• /
• 1996

By utilizing the interinsic structure of the underlying continous-time nonlinear system, one can design an approximate sampled-data observer improved with respect ot the sampling-time for the systems. In this paper, we characterize the conditions for the solvability of the improved approximate sampled-data nonlinear observer design problem. In particular, it is shown that when the dimension of the state space is two, the nonlinear systems for which it is possible ot desing 3rd or higher order approximate sampled-data nonlinear observer are locally state-equivalent to an observable bilinear system. The practical implication is that seeking higher order approximate sampled-data nonlinear observer for nonlinear systems is very restricted.

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.540-548
• /
• 2005

This paper concerns the application and demonstration of sliding mode observer for aeroelastic system, which is robust to model uncertainty including mass and stiffness of the system and various disturbances. The performance of a sliding mode observer is compared with that of a conventional Kalman filter to demonstrate robustness and disturbance decoupling characteristics. Aeroelastic instability may occur when an elastic structure is moving even in subcritical flow speed region. Simulation results using sliding mode observer are presented to control aeroelastic response of flapped wing system due to various external excitations as well as model uncertainty and sinusoidal disturbances in subcritical incompressible flow region.

• Proceedings of the KIEE Conference
• /
• 1997.07c
• /
• pp.1159-1161
• /
• 1997

This paper presents a power system stabilizer(PSS) using the $H_{\infty}$ observer-based sliding mode controller($H_{\infty}$ observer-based SMC) for unmeasurable state variables. The effectiveness of the proposed $H_{\infty}$ observer-based SMPSS for unmeasurable state variables is shown by the simulation result.