• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.33A no.10
• /
• pp.12-21
• /
• 1996

The trellis shaping is the method of selecting a minimum weight sequence from an equivalent class of possible transmitted sequences. It is perforemed by searching through the trellis diagram of a shaping convolutional code Cs. A shaping gain of the order of 1dB may be obtained with a simple 4-state shaping code. But when the rellis shaping is applied to multi-dimensional constellation, the shaping gain is decreased and the transmission delay is increased, which make it difficult to apply the trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping algorithm is used for the mapper in the proposed trellis shaping. The simulatio result shows that the proposed trellis shaping is better than coventional trellis shaping to multi-dimensional constellation. In this paper, in order to solve these problems, the shell mapping on multi-dimensional costellation with respect to shaping gain and transmission delay. And the constellation expansion ratio (CER) and the capacity of transmitted injformation are identical to those of conventional trellis shaping on multi-dimensional constellation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.10 no.4
• /
• pp.184-192
• /
• 1985

The parameter regulation of proportional-plus-intergral-plus-derivative output feedback controllers is presented in the practical compter simulation and the time-domain analysis. Particularly, the restriction of parameter regulation for PID controller utilization is investigated as a result of simulation method. It is finally noted that one may resort to the design of controllers, as investigated, for rapid steady-state response, disturbance rejection, and transient response performance (over 3rd-order process) without computing the open-loop transfer functionmatrix. in consequence is presented the block diagram of sensor base system for PID output feedback controllers.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.151.3-151
• /
• 2001

A design of PI controller to be used to control the first-order lag plus dead time process, such as a flow process, by the coefficient diagram method (CDM) is investigated. The factor of the dead time of process is first approximated to be the first-order by the Pade approximation. The response of the flow control system designed by CDM satisfy both transient and steady state specifications. However, the transient response generally still has long rise time. In order to improve the speed of the system response, a feedforward controller (FFC) is added into the PI control system. The structure of the FFC is a phase lead structure with two designed parameters and one derivative time obtained from the reaction curve of the flow process ...

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.19 no.5
• /
• pp.53-59
• /
• 2020

This paper describes the design of a remote control device that can control the ON/OFF state of multiple air compressors using wireless communication. The main remote controller and air compressor remote controller were designed using a microprocessor (ATmega128), and the circuit diagram was configured to wirelessly communicate using A Zigbee module between the two remote controllers. The result of the measurement of wireless communication distance between the two remote controllers was more than 1.1 km.

• Journal of the Korean Chemical Society
• /
• v.15 no.6
• /
• pp.293-303
• /
• 1971

The theological properties of aqueous suspensions of Black Hills bentonite were measured by using a Couette-type viscometer. Three kinds of flow units in aqueous bentonite suspension were postulated. Each has a different average relaxation time, one Newtonian. One of the non-Newtonian types is thixotropic, and the other is non-thixotropic. The thixotropic non-Newtonian unit is transformed to a Newtonian unit by shear stress. If the stress is relieved, the transformed unit returns to its original state. Two flow equations were derived by introducing chemical kinetics consideration for such a transition into the generalized theory of viscous flow. One equation describes the "upcurve," a diagram of rate of sheat versus shear stress, obtained by increasing the rate of shear, and the other relates to the "downcurve" obtained by decreasing the shear rate. The equations satisfactorilly describe the experimental thixotropic hysteresis of bentonite suspensions. The equations also were successfully applied to the flow curves of the suspensions containing various amounts of monovalent electrolyte (KCI).

• 제어로봇시스템학회:학술대회논문집
• /
• 1992.10b
• /
• pp.146-151
• /
• 1992

A two-compartment four-cell model is developed for the adiabatic autoclave slim type reactor for free radical polymerization of low density polyethylene(LDPE). The mass and energy balances give rise to a set of ordinary differential equations, and by analyzing the system it is possible to predict properly not only the reactor performance but also the properties of polymer product. The steady state multiplicity is found to exist and examined by constructing the bifurcation diagram. The effects of various operation parameters on the reactor performance and polymer properties are investigated systematically to show that the temperature distribution plays the central role for the properties of polymer product. Therefore, it is essential to establish a good control strategy for the temperature in each compartment. In this study it is shown that the reactor system can be adoptively controlled by pole-placement algorithm with conventional PID controller. To accomplish a satisfactory control, the estimator and controller are initialized during the period of start-up.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.39-42
• /
• 1995

A new methodology for representing the interaction between machines and the interlock signals required in FMCs has been developed. Object-Oriented Philosophies (OOPs) lend themselves to the development of such a scheme. A methodology developed here regards the tasks to be performed by the cell or any of its constituent machines for being primal. Sensory signals indicating the changes of state pf machines are used to trigger or initiate tasks. A task may be simple and require a relatively short time to execute, or may be complex and lengthy. This methodology may be depicated by a set of diagrams called Task Initiation Diagram (TID) and their accompanying rules.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.66-69
• /
• 2008

In this paper, The author present a load current feed-forward compensator by method that improve voltage controller of Step-down Chopper to get stable output voltage to sudden change of load current. To confirm the characteristicsof a presented load current feed -forward compensator compared each transfer function of whole system that load current feed-forward compensator is added with transfer function of whole system that existent voltage controller is included using Mason gains formula in Root locus and Bode diagram. As a result the pole of system is improved, extreme point of the wave and system improves, and size of peak value and phase margin of break frequency in resonance frequency confirmed that is good. Therefore, presented control technique could confirm that reduce influence by perturbation and improves stationary state and dynamic characteristics in output of Step-down Chopper.

• Journal of Advanced Marine Engineering and Technology
• /
• v.22 no.6
• /
• pp.854-861
• /
• 1998

The demand of LNG as a cheap and clean energy which does not cause an environmental problem has sharply been increased in Korea. In general LNG is stored in a cargo tank specially designed as a liquid state below $-162^{\circ}C$. The main engine of a LNG carrier is generally a steam boiler because LNG is a highly flammable fluid with the possibility of explosion. The main engine of a cargo ship has to be capable of the propulsion load and various auxiliary loads for the safe navigation since it is the primary energy source. Therefore the evaluation of a main boiler's energy capacity is a key design point in the planning of LNG carrier's construction. This research is to develop the computational program for the analysis of steam boiler Heat balance for LNG carrier.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.274-279
• /
• 2000

The overhead transmission wires operating both at warm temperature and tighten state for a long period of time in a power transmission plant are degraded by air pollution, wind, creep and slip between steel wire and aluminium conductor. The objective of this study is to investigate a high carbon steel wire. We tested for basic mechanical properties and 3 types fatigue behavior, tension-tension, 4 points bending and 3 points bending fatigues. In this study, a conventional fatigue strengths between 4 points bending and tension-tension fatigue were determined by Gerber, Sorderberg and Goodman's theory and we investigated S-N diagram for bending and tensile loading.