• Proceedings of the KIEE Conference
• /
• 2002.07a
• /
• pp.44-46
• /
• 2002

Service restoration following a complete or partial collapse starts with reenergize a transmission line from black-start generators. Voltage problems can arise by Ferranti effect as unloaded transmission line is reenergized. This paper presents analytical results on the primary restorative transmission system focused on the voltage problem during the early restoration process. Methodologies to handle load pick-up compensating Ferranti effect. and terminal voltage and reactive capability limitation of black-start generators about self-excitation are presented. An algorithm for static analysis about these methodologies is developed, and EMTDC simulation for verifying the efficiency of the algorithm is performed.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.24 no.66
• /
• pp.19-26
• /
• 2001

I propose the control chart pattern to provide a more comprehensive scheme for detecting process X and R shifts using individual observations in start-up process. It is important to automate the identification of special disturbances to facilitate real-time manufacturing. This papers formulates X-R charts for interpretation by artificial neural networks. In this papers, which uses the backpropagation algorithm, two samples are fed into the trained neural network to provide outputs ranging from 0 to 1. Simulation results sow that the performance of the proposed control chart using the neural network(NNCC) is quite promising. Using these NN charts, guidelines are given for detecting and classifying process X and R shifts.

• Journal of Power Electronics
• /
• v.12 no.4
• /
• pp.587-594
• /
• 2012

When a PWM rectifier has a low DC-link voltage during startup, the output voltage vector cannot be high enough to regulate the input current. This lack of a PWM rectifier output voltage vector can cause an unregulated inrush current when the rectifier operation starts. This paper presents a PWM rectifier start-up current control algorithm for when it starts operation with a lower DC-link voltage than unloaded condition case. To avoid the unregulated inrush current caused by a lack of DC-link voltage, the proposed control scheme regulates the one phase current with one switch chopping and it generates the current command considering the uncontrolled current magnitude information, which is calculated in advance. Simulation and experiment results support the validity of the proposed method.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.16 no.3
• /
• pp.101-109
• /
• 2002

It is a very difficult to control the S/G(Steam Generator) levels for not only automatic operation mode but also manual operation made by operators in case of start up or low power plants. The object of this study is to develop and applicate a DCS(Digital Control System) that process the reliable control algorithm in order to control S/G levels automatically from a start-up to full power operation mode for nuclear power plants.

• Journal of Power Electronics
• /
• v.15 no.1
• /
• pp.160-176
• /
• 2015

This paper presents a method of designing optimal integer- and fractional-order proportional-integral-derivative (FOPID) controllers for a boost converter to gain a set of favorable characteristics at various operating points. A Pareto-based multi-objective optimization approach called strength Pareto evolutionary algorithm (SPEA) is used to obtain fast and low overshoot start-up and dynamic responses and switching stability. The optimization approach generates a set of optimal gains called Pareto set, which corresponds to a Pareto front. The Pareto front is a set of optimal results for objective functions. These results provide designers with a trade-off look-up table, in which they can easily choose any of the optimal gains based on design requirements. The SPEA also overcomes the difficulties of tuning the FOPID controller, which is an extension to the classic integer-order PID controllers and potentially promises better results. The proposed optimized FOPID controller provides an excellent start-up response and the desired dynamic response. This paper presents a detailed comparison of the optimum integer- and the fractional-order PID controllers. Extensive simulation and experimental results prove the superiority of the proposed design methodology to achieve a wide set of desired technical goals.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.5
• /
• pp.464-474
• /
• 2000

All-to-all personalized communication, or complete exchange, is at the heart of numerous applications, such as matrix transposition, fast Fourier Transform(FFT), and distributed table lookup.We present an efficient all-to-all personalized communication algorithm for a 2D torus inwormhole-routed networks. Our complete exchange algorithm adopts divide-and-conquer approach toreduce the number of start-up latency significantly, which is a good metric for network performancein wormhole networks. First, we divide the whole network into 2x2 basic cells, After speciallydesignated nodes called master nodes have collected messages to transmit to the rest of the basic cell,only master nodes perform complete exchange with reduced network size, N/2 x N/2. When finishedwith this complete exchange in master nodes, these nodes distribute messages to the rest of the masternode, which results in the desired complete exchange communication. After we present our algorithms,we analyze time complexities and compare our algorithms with several previous algorithms. And weshow that our algorithm is efficient by a factor of 2 in the required start-up time which means thatour algorithm is suitable for wormhole-routed networks.

• Journal of Korean Society for Quality Management
• /
• v.46 no.1
• /
• pp.169-188
• /
• 2018

Purpose: The purpose of this study is to analyze low-temperature starting performance of the light attacker and to search and improve the aircraft system including battery and Battery Charge and Control Unit(BCCU). Methods: In order to improve the starting up performance of the light attacker at low-temp, various deficiency cause were derived and analyzed using Fault Tree Analysis method. As a result, it was confirmed there were drawbacks in the charging and discharging mechanism of the battery. The inactivation of the battery's electrolyte at low-temp and the premature termination of the battery charge were the main cause. After long error and trial, we improved these problems by improving performance of battery and optimizing the charging algorithm of BCCU. Results: It was confirmed that the problems of starting up failures were solved through the combined performance test of the battery and BCCU, the ground test using the aircraft system and the operation test conducted by Korea Airforce operating unit for 3 months in winter. Conclusion: This study showed that the improvement of quality reliability was achieved and thus the start-up performance issue of the light attacker has been resolved at low temperature. And it is expected that the design methodologies of temperature-affected electrical system of aircraft will contribute to the development of the aircraft industry in the future.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.4 s.181
• /
• pp.75-82
• /
• 2006

In this paper, we propose an optimal trajectory for biped robots to move up-and-down stairs using a genetic algorithm and a computed-torque control for biped robots to be dynamically stable. First, a Real-Coded Genetic Algorithm (RCGA) which of operators are composed of reproduction, crossover and mutation is used to minimize the total energy. Constraints are divided into equalities and inequalities: Equality constraints consist of a position condition at the start and end of a step period and repeatability conditions related to each joint angle and angular velocity. Inequality constraints include collision avoidance conditions of a swing leg at the face and edge of a stair, knee joint conditions with respect to the avoidance of the kinematic singularity, and the zero moment point condition with respect to the stability into the going direction. In order to approximate a gait, each joint angle trajectory is defined as a 4-th order polynomial of which coefficients are chromosomes. The effectiveness of the proposed optimal trajectory is shown in computer simulations with a 6-dof biped robot that consists of seven links in the sagittal plane. The trajectory is more efficient than that generated by the modified GCIPM. And various trajectories generated by the proposed GA method are analyzed in a viewpoint of the consumption energy: walking on even ground, ascending stairs, and descending stairs.

• Proceedings of the KIEE Conference
• /
• 2002.11b
• /
• pp.161-163
• /
• 2002

Service restoration following a complete or partial collapse starts with reenergizing a transmission line from black-start generators. Voltage problems can arise from Ferranti effect as unloaded transmission line is reenergized. This Paper presents system analyser to develop for verifying the primary restorative transmission system. The algorithm which has been used in the analyser is to handle load pick-up compensating Ferranti effect. and terminal voltage and reactive capability limitation of black-start generators about self-excitation.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.127-129
• /
• 1997

In this paper, an active magnetic bearing-based motor-generator(M-G) system is designed and controlled by using DSP devices. Several experiments including start-up test, impulse test, whirl test, and generator load test are conducted using digital PID algorithm and AC power of about 58Hz, 100V, 0.8A can be generated from the M-G set.