• 감성과학
• /
• 제4권1호
• /
• pp.23-31
• /
• 2001

Psychological and physiological effects from simulator sickness could be an important bias factor for sensibility evaluation. The present experiment investigated the effects of simulator sickness on sensibility evaluation in the controlled condition of driving a car for 60 minutes on a constant speed (60km/h) in graphic simulator. The simulator sickness was measured and analysed for every five minutes using their subjective evaluation and physiological signals. Results of the subjective evaluation showed that there was significant difference between rest and driving condition at 10 minutes from the start of driving, and the level of difference was increased linearly with time. The analysis on central and autonomic nervous systems showed the significant difference between rest and driving conditions after 5 minutes from the start of the driving on the parameters $\alpha$/total and $\beta$/total, and increased level of sympathetic nervous system. But there was no significant difference between different time conditions. The results indicates that physiological changes from simulator sickness can be a bias factor in objective evaluation of human sensibility which also, uses physiological signals. That is, the changes on the parameter $\alpha$/total and $\beta$/total, and on activation level of sympathetic nervous system from simulator sickness can be a bias factor for evaluation of the level of pleasantness and tension. Therefore the effort on improving the analysis by minimizing or eliminating the bias factors should be done for better and accurate sensibility evaluation in simulator environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1384-1386
• /
• 2005

This paper focuses on development of load test simulator of a steam turbine-generator in a nuclear power plant. When load is taken off from electrical power network, it is very difficult to effectively control the steam flow to turbine of the nuclear turbine-generator, because of disturbances, such as electrical load and network unbalance on electrical network. Up to the present time, the conventional control system has been used for the load control on nuclear steam generator, owing to the easy control algorithms and the advantage which have been proven on the nuclear power plant. However, since there are problems with stability control during low power and start-up, only a highly experienced operator can operate during those procedures. Also, a great deal of time and an expensive simulator is needed for the training of an operator. The KEPRI is developed simulator for 600MW nuclear power plant to take a test of generator load rejection, throttle valve, and turbine load control. Total load test is implemented before start up.

• Journal of Mechanical Science and Technology
• /
• 제19권4호
• /
• pp.1036-1043
• /
• 2005

Concentric annular heat pipes (CAHP) were fabricated and tested to investigate their thermal characteristics. The CAHPs were 25.4 mm in outer diameter and 200 mm in length. The inner surface of the heat pipes was covered with screen mesh wicks and they were connected by four bridge wicks to provide liquid return path. Three different heat pipes were fabricated to observe the effect of change in diameter ratios between 2.31 and 4.23 while using the same outer tube dimensions. The major concern of this study was the transient response as well as isothermal characteristics of the heat pipe outer surface, considering the application as uniform heating device. A better performance was achieved as the diameter ratio increased. For the thermal load of 180 W, the maximum temperature difference on the outer surface in the axial direction of CAHP was $2.3^{\circ}C$ while that of the copper block of the same outer dimension was $5.9^{\circ}C.$ The minimum thermal resistance of the CAHP was measured to be $0.004^{\circ}C/W.$ In regard to the transient response during start-up, the heat pipe showed almost no time lag to the heat source, while the copper block of the same outer dimensions exhibited about 25 min time lag.

• ALGAE
• /
• 제21권3호
• /
• pp.295-305
• /
• 2006

The purpose of the study is to understand the ecological characteristics of the early stage of community formation of epilithic diatoms. The samples were daily collected from a site of the Kumho River during 70 days from October 13 to December 21 in 2002. Total 126 diatom taxa collected in the study were classified into 114 species and 12 varieties belonging to 26 genera. About 80% of the taxa collected from the artificial substrata during the whole studying period were observed until tenth day from the start time of the study. In the study the successional process of the diatom community was divided into the three stages of the early, the middle and the later by cluster analysis based on the similarities in species composition among the communities. Cocconeis placentula Ehrenb. and C. placentula var. lineata (Ehrenb.) V.H., horizontally positioned species, would be divided into the early successional species, and Diatoma vulgre Bory, vertically positioned species, was the later successional species. Cell densities and species composition of the diatoms on the artificial substrata were closely similar to them of natural substrata after 40th day from the start time of the study.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.741-744
• /
• 2001

OFDM 방식은 전통적인 단일 반송파 전송방식과는 달리 전송할 데이터를 병렬적으로 변조하여 주어진 다중전송채널에 다수의 반송파를 실어보내므로 고속의 데이터전송을 수행하고 주파수를 직교적으로 오버랩 시킴으로써 높은 스펙트럼 효율을 제공할 수 있어 여러 분야에서 적용되고 있으며 계속해서 연구되고 있다. 본 논문에서는 컴퓨터 시뮬레이션을 통해서 변조방식에 따른 OFDM 무선통신시스템의 성능을 평가하였으며 변조방식으로서는 M-PSK, M-QAM을 사용하였다. 시뮬레이션은 다중로지연확산, 가우시안채널잡음, Peak Power Clipping, Frame Start Time Error 등이 포함된 가상의 채널환경과 실제채널환경에서 적용되었다. 시뮬레이션 결과 OFDM 시스템에서의 변조방식으로는 M-QAM 방식이 M-PSK 방식보다 우수함을 확인하였다.

• 한국운동역학회지
• /
• 제22권1호
• /
• pp.95-104
• /
• 2012

The purpose of this study targeted to national cross-country skiers representatives was to implement hypothetical experiment on their patterns of the movements and analysis on kinematic variables occurred while double polling was conducted between starting and finishing phase of 56 meters. Furthermore, it aimed to provide a set of quantitative data to illustrate how to improve one's skill and performance of sprint. In our experiments, we conducted 3-dimension analysis of cycle characteristics, joint angle(hip, knee and elbow), and pole angle. The results showed that at the starting phase, the players did not show a significant difference in attributes of time and distance. In heat 1 where elbow angle and polling starts, the pole angle was noticeably high in heat 1. At the finishing phase, there was a considerable distinction with a high frequency in performing a short polling time and high speed in heat 3. The players showed large extension between the flexion and of the hip angle which indicates high contribution given from the movement of lower body(hip, knee).

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.77-84
• /
• 2015

The study is to investigate which features are perceived by Social Network Service(SNS) users as the most required one to further boost the usage of service, and to examine the perception of these features of SNS sites varies according to their demographic and service usage characteristics. The study also is to suggest a few of research propositions on the relationships between required features of SNS sites and characteristics of SNS users, based on statistical analyses. To accomplish these research purposes, the study defined characteristics of SNS users including demographic(gender, age) and service usage one(start time of service usage, service usage place), and required features of SNS sites(system, service, information, emotion) based on the literature review of SNS. The results show, based on the statistical analyses using survey questionnaire on Korean and Chinese SNS users, that there are differences in perception of required features of SNS sites among the respondents grouped by age, start time of service usage, service usage place. Finally, the study proposed three research propositions, based on the analysis result, that could be used in SNS related researches in the future.

• 정보통신설비학회논문지
• /
• 제10권1호
• /
• pp.14-26
• /
• 2011

광 가입자용 송신 장치는 가입자 접속부의 ATM(Asynchronous Transfer Mode) 계층으로부터 ATM 셀을 비동기적인 방법으로 FIFO(First In, First Out)를 통해 수신하여 Idle/Unasigned 셀의 삽입, 셀에 대한 HEC(Header Error Correction) 계산, 그리고 셀 페이로드에 대한 스크램블링을 통해 VC4 신호 페이로드에 사상한다. 이때 VC4 POH(Path Over Head)상의 H4 바이트에 의해 셀의 시작점을 지시하고 동시에 POH 오버헤드에 대한 생성, 삽입을 통해 VC4 신호를 형성한다. 이 신호는 AU4 포인터 생성부에서 VC4의 시작점 J1을 생성하여 AUG버스를 통해 STM-1 신호 생성 부에서 프레임 형태로 출력된 후 155Mbps 속도로 광 신호로 변환되어 송신된다.

• 한국정보통신학회논문지
• /
• 제5권2호
• /
• pp.251-256
• /
• 2001

OFDM 방식은 전통적인 단일 반송파 전송방식과는 달리 전송할 데이터를 병렬적으로 변조하여 주어진 다중전송채널에 다수의 반송파를 실어보내므로 고속의 데이터전송을 수행하고 주파수를 직교적으로 오버랩 시킴으로써 높은 스펙트럼 효율을 제공할 수 있어 여러 분야에서 적용되고 있으며 계속해서 연구되고 있다. 본 논문에서는 컴퓨터 시뮬레이션을 통해서 변조방식에 따른 OFDM 무선통신시스템의 성능을 평가하였으며 변조방식으로서는 M-PSK, M-QAM을 사용하였다. 시뮬레이션은 다중로지연확산, 가우시안채널잡음, Peak Power Clipping, Frame Start Time Error 등이 포함된 가상의 채널환경과 실제채널환경에서 적용되었다. 시뮬레이션 결과 OFDM 시스템에서의 변조방식으로는 M-QAM 방식이 M-PSK 방식보다 우수함을 확인하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.3079-3084
• /
• 2008

A fast response $CO_2$ analyzer has been developed for measuring the $CO_2$ concentration during transient condition of SI engine. The analyzer is based on the non-dispersive infrared absorption technique, electrical chopping system and water cooling system. The analyzer has good repeatability, linearity and permissible drift characteristic. Besides, it has 18ms with a response to measure the $CO_2$ concentration. The fast response $CO_2$ analyzer was applied to single cylinder SI engine and the $CO_2$ emission was examined during engine start. Simultaneously, the standard exhaust gas analyzer, which has slow response time, was used for considering the engine-out $CO_2$ characteristic. The developed analyzer showed much faster responsive characteristic than that of a standard analyzer and made cycle by cycle exhaust gas analysis possible. The transient engine operating characteristics will be estimated and the transient behaviors on engine-out emission and performance will be improved.