• 한국체육학회지인문사회과학편
• /
• v.55 no.3
• /
• pp.43-57
• /
• 2016

This narrative study aims to describe the experience of P.E. assessment that was conducted by P.E. teachers of Korea Science Academy of KAIST, and interpret the educational significance that was found in the process. The study participants were two P.E. teachers who were selected by decisive case sampling method. Data were collected mainly through official interviews with study participants, and through researcher's field notes, informal interviews, various minutes, students' evaluation of teaching, and emails between the researcher and study participants. Data were analyzed through inductive categorization, and to gain veracity of the study, there were integration of diverse materials, advice and suggestions of fellow researchers, continuous confirmation of study texts by study participants. Study participants, while conducting P.E. assessment in Korea Science Academy of KAIST, experienced effectiveness of evaluation such as qualitative development of P,E. classes in accordance with the simplified assessment, freedom from the chores of handling assessment results, students' improved perceptions of P.E. class, realization of safe classes without excessive competition, and the possibility of giving alternative evaluations to pass/fail system but at the same time experienced limitations such as concerns over gaining validity and reliability of P.E. evaluation, the students' attitude who take lightly of P.E. class, and the reality that teachers cannot fail students. The evaluation experiences of the two P.E teachers were educationally interpreted as encounter with good P.E. classes, invitation to P.E. class criticism, and the start of school P.E. culture that is led by students.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3D
• /
• pp.453-459
• /
• 2006

This paper presents an experimental evaluation of wandering effect on asphalt concrete pavement responses. A laser-based wandering system has been developed and its performance is verified under various field conditions. The portable wandering system composed of two laser sensors with Position Sensitive Devices can allow one to measure the distance between laser sensors and tire edges of moving vehicle. Therefore, lateral position of each wheel on the pavement can be determined in a real time manner. Pavement responses due to different loading paths are investigated using a roll over test which is carried out on one of asphalt surfaced pavements in the Korea Highway Corporation test road. The pavement section (A5) consists of 5 cm thick surface course; 7 cm intermediate course; and 18 mm base course, and is heavily instrumented with strain gauges, vertical soil pressure cells and thermo-couples. From the center of wheel paths, seven equally-spaced lateral loading paths are carefully selected over an 140 cm wandering zone. Test results show that lateral horizontal strains in both surface and intermediate courses are mostly compressive right under the loading path and tensile strains start to develop as the loading offset becomes 40 cm from the wheel path. The development of the vertical stresses in the top layers of subbase and anti-frost is found to be minimal once the loading offset becomes 50 cm.

• Korea Science and Art Forum
• /
• v.35
• /
• pp.281-292
• /
• 2018

Crowd funding is also called social funding because of SNS that it helps early start-up founder and makers to raise money for idea product production. Recently, the funding platform has recorded high growth rates. As a result, the government in Korea has introduced various support policies for the crowd funding. The purpose of this study is to develop a diagnostic design guideline for product design oriented makers based on the historical situation. The paper writer applied literature survey and expert interview as research methods. The literature survey focused on internet news and previous research studies. The expert interview was conducted for 10 specialist people and divided for the second time. As a result of the text survey, the current guideline was lacking in design and in detail. Researchers have been informed through previous paper that information transfer text and images are important factors for funding success. In the first interview with seven special participants, we made a draft design guideline for social funding with a two-step process and nine themes. We, research and three professional people having a evaluation experience, conducted verification and supplementation for establishing the design guider with a three-step process and eight themes in the next interview. The design guideline for crowd funding, it can be used by money funding manager apart from design makers. Through the results of this paper, researchers are expected to prevent problems and contribute to healthy crowd funding ecosystem development.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.17 no.3
• /
• pp.269-280
• /
• 2022

Recently, the necessity and importance of entrepreneurship education in universities in terms of nurturing creative talents and career paths have been emphasized. This study attempted to examine the mechanism of how the effectiveness of entrepreneurship education affects career maturity by dividing it into theoretical education and practical entrepreneurship education with problem-solving competency rather than a single dimension. This study performed an empirical analysis using Smart PLS for 153 college students. The results of the analysis are as follows. First, it was found that theoretical and practical entrepreneurship education had a significant positive (+) effect on problem-solving ability. Second, theoretical entrepreneurship education had a positive (+) effect on career maturity. but practical entrepreneurship education did not have a direct significant effect on career maturity. Third, problem-solving ability had a positive (+) effect on career maturity. Finally, the mediating effect analysis revealed that problem-solving ability had mediating effects on both entrepreneurship education and career maturity of college students. In conclusion, this study has its significance in that it presents the effectiveness and direction of entrepreneurship education both in theory and practice at a time when it is urgent to foster inspiring and creative talent in universities to meet the demands of the times. In particular, it was analyzed that entrepreneurship education conducted at universities is required to upgrade the curriculum, content, methodology, and subject design of practical entrepreneurship education, and there is an urgent need for improvement so that the effect of practical entrepreneurship education can have a significant effect on career maturity.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.328-335
• /
• 2005

The objective of this study was to evaluate tire effects of modified triple pelvic osteotomy(TPO). The procedures of modified TPO were composed of two iliac osteotomies and a pubic symphysiotomy at a tittle. Medical records of modified TPO treatment on 36 dogs and of unilateral TPO on 7 dogs were reviewed on the basis of signalment, body weight, operation time, Healing time of osteotomy sites and complications from October 2002 to September 2004. The values of clinical status and hip dysplasia, Norberg angle, percentage of femoral head coverage and pelvic diameter from radiographs taken preoperative, immediately postoperative, 2, 4, 8, 12 and 24 weeks after operation, respectively, were measured. In .unilateral TPO, the dogs could start standing without assistance from $3.0\pm1.0days$ and walking from $8.3\pm0.6days$ (n=3). Mean clinical grade before and 24 weeks after surgery were $2.2\pm0.42$(n=6) and $3.5\pm0.7$ (n=2), respectively. Mean operation time was $107.3\pm38.9$ minutes (n=4). In modified TPO, the dogs were seen to staff standing without assistance from $4.9\pm3.7$ days and walking from $7.3\pm4.8days$ (n=25). Mean clinical grade before surgery and 24 weeks after surgery were $2.3\pm1.5$ (n=27) and $3.2\pm0.7$)(n=9), respectively. Postoperative clinical grade significantly improved against preoperative clinical grade (P<0.01). Mean operation time was $143\pm42.8$ minutes (n=24). This was shorter than time f3r twice unilateral TPO. By comparison with preoperative values, postoperative mean radiographic grade, percentage of femoral head coverage and Norberg angle measured at the recheck time point significantly increased (P<0.01). Mean postoperative pelvic diameter was significantly larger than preoperative pelvic diameter in modified TPO (P<0.01) but not in unilateral TPO. These results indicated that modified TPO was effective technique for the treatment of hip dysplasia in dogs.

• Journal of architectural history
• /
• v.20 no.4
• /
• pp.61-80
• /
• 2011

This study estimated the prototype of Yangjindang at the time of its foundation by putting together the literature and discovered data and historical research on family related to Sangju Yangjindang, and looked at its architectural characteristics. These are summarized as follows: First, Yangjindang is an office building which was completed in three years [1629] after its start of construction when Keomgan Jojeong was at the age of 72 [1626] in his latter days and it was used for performing ancestral rites for Jojeong's forefathers of the head family of Pungyang Jo by family origin. Yangjindang was founded as a base of utopia for putting ancestral rites & commemoration, harmoniousness of a tribe, and educational idea into practice together with Ojakdang. Such a movement can be judged to interpret and apply the circumstances of the times realistically and flexibly where they tried to pursue the promotion of Confucianism & studies of the proprieties as well as the consciousness of practice, and to bring a tribe into harmony after the war through the retirement of Toegye School. Second, it is located at a topographically ideal spot on the edge of the Jangcheon-a tributary of Nakdong with a good physiology and landscape and its location was also the lot for a house of Jojeong's ancestor, which was burned down by war. Behind such a location and planning of Yangjindang, it is presumed, though not certain that it was modelled after Naeap village at Andong- Jojeong's parents-in-low's home. Third, as for its foundation size, it's a head house as much as about more than 100-kan, and its structure is composed of Samyo, Bonche, and Yangjindang. In addition, arrangements of buildings and its composition system and renovation procedures followed Chu-tzu Garyoe. Composition of Samyo can be restored to Yangjindang, Jugo, Woesammun, and Samyo; however, there has been no case of existence in case of Jugo building composition & arrangement takes on an aspect of a compromise between Gamyojido and Sandangjido of Garoe, which seems to be the result from flexibly interpreting and applying the rituals and studies of the proprieties of Toegye School in keeping with locational topography and realistic circumstances while making it a principle for them to observe by Toegye School. There exists a difference between Bonche and its counterpart of the upper class housing at Sangju district in that Bonche[main building] is a squre-shaped 'Ttuljip' typical of Andong setting a family ancestral ritual as a main function. Fourth, there existed a lot of hardships in raising money to cover repairs in time of doing repairs to this structure after 180 years since its establishment. In case of the repair work on Bonche, the level of renovation was limited to the replacement of old materials for rafters, doorpost, roof members and railings with new materials, together with partial alterations in case of window system. It is estimated that Yangjindang was renovated in 1808, and afterwards it was renamed Okryujeong after being re-built at another site. Through the repairs, the floor was expanded for the clan's meeting, and angle rafters and roof members were mended as well. Especially, the plane and structure of Okryujeong which was re-built at another site are expected to give clues to its restoration due to the resemblance to original appearance of Yangjindang at the time of its renovation in 1808.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.38 no.2
• /
• pp.156-163
• /
• 2002

In order to development the construction and dimension of fishing gear for gizzard shad coastal purse seine, first of all investigated to the sinking speed and underwater geometry of net, behaviour of fish school to the net during the fishing operation In the field. The results obtained are summarized as follows; 1. Average sinking speed of net was 13cm/sec in bunt, 9.0cm/sec and 9.5cm/sec in 170m and 280m of center, 4.9cm/sec in end wing side, therefore was fastest in start of shooting and decreased gradually during the shooting process. 2. The most of leadline was reached in bottom from the shooting immediately to hauling time and the mean depth of timber bar used equipment for the escaping prevention of fish school was within the 2.7m. 3. The fish school of gizzard shad was appearanced higher density and remained to the most time in bottom than the surface and repeated to vortical movement, and its tendency to distinct in rapid time of tide current. 4. Behaviour of fish school in the net was showed to the vortical movement by sinking and rising immediately with the shooting of net and then divide with the two shape to follow round the wall of net and no patterns straightly movement in the net, and tendency easily catched in fish school of the wall of net. 5. Escaping of fish school in the gap of wing side was to busy after that seting the timber bar, therefore its function for escaping prevention of fish school was very lowed. 6. Escaping behaviour of fish school was differenced with the depth of fishing ground, the above 20m escaped to busy through the below in ledline because the sinking speed of fish school is fast than the net.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.1
• /
• pp.35-43
• /
• 2017

This study was to research the relationships between rice straw degradation and changes of fibrolytic bacteria population during the in vitro rumen fermentation. Dry matter(DM) digestion of rice straw and population of fibrolytic bacteria were measured at the 0. 4, 8, 12 and 48 hours during the incubation. The populations of F. succinogenes. R. albus and R. flavefaciens were defined as log copy number of 16S rDNA by technical method of Quantitative real-time PCR. Total population of F. succinogenes, R. flavefaciens and R. albus was sum of bactera attached on rice straw and suspended in medium. It's population was increased with incubation, reached top level of 29.0 Log copy No at the 24 hour and then decreased. In the meantime, DM digestion of rice straw showed the higher increasement from the 8 hour to the 24 hour than from the 0 hour to the 8 hour, and then a slowdown in increasing trend of digestibility. Attachments of F. succinogenes, R. flavefaciens and R. albus were detected immediately after start of in vitro rumen incubation. At the same time, the colonized bacterial share were respectively 34.5%, 84.4% and 67.9% in total population. All of them was reached the highest colonized bacterial share above 94.7% at the 4 hour incubation. However population of attached bacteria was shown the highest level at the 12 hour or the 24 hour incubation. Kinetics of colonization were formed area of top speed from the 12 hour to the 24 hour and respectively reached 10.33, 9.28 및 8.30 Log copy No/h/g DM at the 24 hour by F. succinogenes, R. flavefaciens and R. albus. The kinetics of rice straw degradation was formed top level of 0.95% DM/h at the 24 hour. The present results gave clear evidence that degradation of rice straw was increased with the development of total fibrolytic bacteria in process of rumen fermentation. Also, their attachment was largely occurred immediately after insertion of rice straw, the colonized bacteria was actively proliferated, and then degradation of rice straw was maximized.

• Journal of The Korean Association For Science Education
• /
• v.35 no.1
• /
• pp.53-64
• /
• 2015

This research was performed of high school science classes. These science classes progressed by using Scratch, and surveyed students' perception after finishing each class. This research was conducted of male students who want to choose department of natural science in the next grade. Those classes are consisted of four classes. This study produced a journal, and contained expressions of their thinking and feeling based on experiences during attending classes and projects. Consequently, that journal was analyzed in view of understanding and perception of Scratch using science classes, and it was also included of utilizing Scratch program. Research shows following three conclusions. First, students preferred Scratch using class to general one. They attend more active with high interest, and they felt senses of accomplishment while they make output by themselves. Second, their studies passed through three stages. These are problem perception, problem solving, and producing. Problem solving stage is especially complicated and difficult stage to students. This stage is consisted of Scratch side and Science side. Scratch side has Design and applying process, and Science side has data gathering and analyzing. Students' comprehension of scientific knowledge is increased and is preserved long time through this stage. Last, students had a hard time using Scratch. Because, it is the first time to them to use that program. Therefore, we deemed that they needed to start this kind of experience at lower grade than they are now, such as middle school stage. It is expected that this type of classes are getting more expanded and more populated as a part of students' core ability.

• Restorative Dentistry and Endodontics
• /
• v.34 no.5
• /
• pp.450-459
• /
• 2009

The aim of this study was to measure the initial dynamic modulus changes of light cured composites using a custom made rheometer. The custom made rheometer consisted of 3 parts: (1) a measurement unit of parallel plates made of glass rods, (2) an oscillating shear strain generator with a DC motor and a crank mechanism, (3) a stress measurement device using an electromagnetic torque sensor. This instrument could measure a maximum torque of 2Ncm, and the switch of the light-curing unit was synchronized with the rheometer. Six commercial composite resins [Z-100 (Z1), Z-250 (Z2), Z-350 (Z3), DenFil (DF), Tetric Ceram (TC), and Clearfil AP-X (CF)] were investigated. A dynamic oscillating shear test was undertaken with the rheometer. A certain volume ($14.2\;mm^3$) of composite was loaded between the parallel plates, which were made of glass rods (3 mm in diameter). An oscillating shear strain with a frequency of 6 Hz and amplitude of 0.00579 rad was applied to the specimen and the resultant stress was measured. Data acquisition started simultaneously with light curing, and the changes in visco-elasticity of composites were recorded for 10 seconds. The measurements were repeated 5 times for each composite at $25{\pm}0.5^{\circ}C$. Complex shear modulus G*, storage shear modulus G', loss shear modulus G" were calculated from the measured strain-stress curves. Time to reach the complex modulus G* of 10 MPa was determined. The G* and time to reach the G* of 10 MPa of composites were analyzed with One-way ANOVA and Tukey's test ($\alpha$ = 0.05). The results were as follows. 1. The custom made rheometer in this study reliably measured the initial visco-elastic modulus changes of composites during 10 seconds of light curing. 2. In all composites, the development of complex shear modulus G* had a latent period for $1{\sim}2$ seconds immediately after the start of light curing, and then increased rapidly during 10 seconds. 3. In all composites, the storage shear modulus G" increased steeper than the loss shear modulus G" during 10 seconds of light curing. 4. The complex shear modulus of Z1 was the highest, followed by CF, Z2, Z3, TC and DF the lowest. 5. Z1 was the fastest and DF was the slowest in the time to reach the complex shear modulus of 10 MPa.