• Science of Emotion and Sensibility
• /
• v.4 no.1
• /
• pp.23-31
• /
• 2001

Psychological and physiological effects from simulator sickness could be an important bias factor for sensibility evaluation. The present experiment investigated the effects of simulator sickness on sensibility evaluation in the controlled condition of driving a car for 60 minutes on a constant speed (60km/h) in graphic simulator. The simulator sickness was measured and analysed for every five minutes using their subjective evaluation and physiological signals. Results of the subjective evaluation showed that there was significant difference between rest and driving condition at 10 minutes from the start of driving, and the level of difference was increased linearly with time. The analysis on central and autonomic nervous systems showed the significant difference between rest and driving conditions after 5 minutes from the start of the driving on the parameters $\alpha$/total and $\beta$/total, and increased level of sympathetic nervous system. But there was no significant difference between different time conditions. The results indicates that physiological changes from simulator sickness can be a bias factor in objective evaluation of human sensibility which also, uses physiological signals. That is, the changes on the parameter $\alpha$/total and $\beta$/total, and on activation level of sympathetic nervous system from simulator sickness can be a bias factor for evaluation of the level of pleasantness and tension. Therefore the effort on improving the analysis by minimizing or eliminating the bias factors should be done for better and accurate sensibility evaluation in simulator environments.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1384-1386
• /
• 2005

This paper focuses on development of load test simulator of a steam turbine-generator in a nuclear power plant. When load is taken off from electrical power network, it is very difficult to effectively control the steam flow to turbine of the nuclear turbine-generator, because of disturbances, such as electrical load and network unbalance on electrical network. Up to the present time, the conventional control system has been used for the load control on nuclear steam generator, owing to the easy control algorithms and the advantage which have been proven on the nuclear power plant. However, since there are problems with stability control during low power and start-up, only a highly experienced operator can operate during those procedures. Also, a great deal of time and an expensive simulator is needed for the training of an operator. The KEPRI is developed simulator for 600MW nuclear power plant to take a test of generator load rejection, throttle valve, and turbine load control. Total load test is implemented before start up.

• Journal of Mechanical Science and Technology
• /
• v.19 no.4
• /
• pp.1036-1043
• /
• 2005

Concentric annular heat pipes (CAHP) were fabricated and tested to investigate their thermal characteristics. The CAHPs were 25.4 mm in outer diameter and 200 mm in length. The inner surface of the heat pipes was covered with screen mesh wicks and they were connected by four bridge wicks to provide liquid return path. Three different heat pipes were fabricated to observe the effect of change in diameter ratios between 2.31 and 4.23 while using the same outer tube dimensions. The major concern of this study was the transient response as well as isothermal characteristics of the heat pipe outer surface, considering the application as uniform heating device. A better performance was achieved as the diameter ratio increased. For the thermal load of 180 W, the maximum temperature difference on the outer surface in the axial direction of CAHP was $2.3^{\circ}C$ while that of the copper block of the same outer dimension was $5.9^{\circ}C.$ The minimum thermal resistance of the CAHP was measured to be $0.004^{\circ}C/W.$ In regard to the transient response during start-up, the heat pipe showed almost no time lag to the heat source, while the copper block of the same outer dimensions exhibited about 25 min time lag.

• ALGAE
• /
• v.21 no.3
• /
• pp.295-305
• /
• 2006

The purpose of the study is to understand the ecological characteristics of the early stage of community formation of epilithic diatoms. The samples were daily collected from a site of the Kumho River during 70 days from October 13 to December 21 in 2002. Total 126 diatom taxa collected in the study were classified into 114 species and 12 varieties belonging to 26 genera. About 80% of the taxa collected from the artificial substrata during the whole studying period were observed until tenth day from the start time of the study. In the study the successional process of the diatom community was divided into the three stages of the early, the middle and the later by cluster analysis based on the similarities in species composition among the communities. Cocconeis placentula Ehrenb. and C. placentula var. lineata (Ehrenb.) V.H., horizontally positioned species, would be divided into the early successional species, and Diatoma vulgre Bory, vertically positioned species, was the later successional species. Cell densities and species composition of the diatoms on the artificial substrata were closely similar to them of natural substrata after 40th day from the start time of the study.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.741-744
• /
• 2001

In this study, a OFDM mode, unlike traditional single carrier mode, is that a great number of carrier in multi-channel environment is transmitted by modulating objective Data parallel in order to execute high speed Data translation and make frequency orthogonal to offer high spectrum efficiency. As a result, this method is adopted to a variety of fields and is being actively studied. In this papers, the efficiency of OFDM wireless-communication systems is evaluated by modulation methods through computer simulation. M-PSK and M-QAM are used as modulation methods. The simulation is executed in a real channel and a virtual channel included multi-path, AWGN, Peak Power clipping, Frame Start Time Error As a result of simulation, it is confirmed that M-QAM method is superior to M-PSK in OFDM systems in terms of the transmission methods.

• Korean Journal of Applied Biomechanics
• /
• v.22 no.1
• /
• pp.95-104
• /
• 2012

The purpose of this study targeted to national cross-country skiers representatives was to implement hypothetical experiment on their patterns of the movements and analysis on kinematic variables occurred while double polling was conducted between starting and finishing phase of 56 meters. Furthermore, it aimed to provide a set of quantitative data to illustrate how to improve one's skill and performance of sprint. In our experiments, we conducted 3-dimension analysis of cycle characteristics, joint angle(hip, knee and elbow), and pole angle. The results showed that at the starting phase, the players did not show a significant difference in attributes of time and distance. In heat 1 where elbow angle and polling starts, the pole angle was noticeably high in heat 1. At the finishing phase, there was a considerable distinction with a high frequency in performing a short polling time and high speed in heat 3. The players showed large extension between the flexion and of the hip angle which indicates high contribution given from the movement of lower body(hip, knee).

• Journal of the Korea Society of Computer and Information
• /
• v.20 no.7
• /
• pp.77-84
• /
• 2015

The study is to investigate which features are perceived by Social Network Service(SNS) users as the most required one to further boost the usage of service, and to examine the perception of these features of SNS sites varies according to their demographic and service usage characteristics. The study also is to suggest a few of research propositions on the relationships between required features of SNS sites and characteristics of SNS users, based on statistical analyses. To accomplish these research purposes, the study defined characteristics of SNS users including demographic(gender, age) and service usage one(start time of service usage, service usage place), and required features of SNS sites(system, service, information, emotion) based on the literature review of SNS. The results show, based on the statistical analyses using survey questionnaire on Korean and Chinese SNS users, that there are differences in perception of required features of SNS sites among the respondents grouped by age, start time of service usage, service usage place. Finally, the study proposed three research propositions, based on the analysis result, that could be used in SNS related researches in the future.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.10 no.1
• /
• pp.14-26
• /
• 2011

In this paper, we've studied Optical Fiber Subscribe Transmit system. After receiving the ATM cell passing through the FIFO of the Asynchronous Transfer Method from the ATM Layer images to the VC4 signal payload passing through scrambling of the cell payload, HEC computation of the cell and inserting the Idle/Unassigned cell. At this time formed VC4 signal passing through the generating and inserting POH overhead at the same time indicating the start point of the cell by the H4 byte on the VC4 POH. This ATM cell transmits 155Mbps speed changing the optical signal after outputting the frame format at the STM-1 signal generation block through the AUG bus after generating J1 of the VC4 start point at the AU4 pointer generation block.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.2
• /
• pp.251-256
• /
• 2001

In this study, a OFDM mode, unlike traditional single carrier mode, is that a great number of carrier in multi-channel environment is transmitted by modulating objective Data parallel in order to execute high speed Data translation and make frequency orthogonal to offer high spectrum efficiency As a result, this method is adopted to a variety of fields and is being actively studied. In this papers, the efficiency of OFDM wireless-communication systems is evaluated by modulation methods through computer simulation. M-PSK and M-QAM are used as modulation methods. The simulation is executed in a real channel and a virtual channel included multi-path, AWGN, Peak Power clipping, Frame Start Time Error. As a result of simulation, it is confirmed that M-OAM method is superior to M-PSK in OFDM systems in terms of the transmission methods.

• Proceedings of the KSME Conference
• /
• 2008.11b
• /
• pp.3079-3084
• /
• 2008

A fast response $CO_2$ analyzer has been developed for measuring the $CO_2$ concentration during transient condition of SI engine. The analyzer is based on the non-dispersive infrared absorption technique, electrical chopping system and water cooling system. The analyzer has good repeatability, linearity and permissible drift characteristic. Besides, it has 18ms with a response to measure the $CO_2$ concentration. The fast response $CO_2$ analyzer was applied to single cylinder SI engine and the $CO_2$ emission was examined during engine start. Simultaneously, the standard exhaust gas analyzer, which has slow response time, was used for considering the engine-out $CO_2$ characteristic. The developed analyzer showed much faster responsive characteristic than that of a standard analyzer and made cycle by cycle exhaust gas analysis possible. The transient engine operating characteristics will be estimated and the transient behaviors on engine-out emission and performance will be improved.