• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.58 no.4
• /
• pp.459-467
• /
• 2013

This study was conducted to investigate the effects of substituting whole barley flours on quality characteristics of noodles. Noodles were made with composite flour containing 20% whole barley flour of various hullless barley cultivars and the quality characteristics, ${\beta}$-glucan content and antioxidant characteristics were investigated. In amylogram characteristics, the initial pasting temperature and peak viscosity were increased, and setback was decreased in complex flour. Noodles containing barley flour had low lightness, yellowness and high redness compare to wheat noodle. Water absorption of cooked noodles was lower than wheat noodle. The value of swelling index was high in noodles containing non-waxy barley flour and low in noodles containing waxy barley flour. Hardness and gumminess of noodles were lower than wheat noodle. Noodles containing non-waxy barley had higher hardness, cohesiveness and gumminess than noodles containing waxy barley flour. Dahan, non-waxy barley cultivar showed similar characteristics with the wheat noodle. ${\beta}$-Glucan content and antioxidant activity were increased with adding barley flour. Cooked noodle had slightly high ${\beta}$-glucan content, low starch content and low antioxidant activity compared to value of uncooked noodle.

• Korean Journal of Food Science and Technology
• /
• v.27 no.3
• /
• pp.394-403
• /
• 1995

Various thermal treatments such as toasting, roasting, drum drying, autoclaving+drum drying, microwaving+drum drying and extrusion were attempted to investigate their effects on chemical composition (proximate composition, Klason lignin, neutral sugar, uronic acid, starch, free sugar, dietary fiber, phytic acid, etc) and functional properties (water solubility index, water absorption index, water holding capacity, oil holding capacity, bulk density, swelling, etc) of wheat bran. Thermal treatments on wheat bran increased soluble dietary fiber (SDF) content from 2.7% (raw sample) to 4.6% (toasted), 4.5% (roasted), 4.6% (drum dried), 5.2% (autoclaved), 3.7% (microwaved), 5.6% (extruded). In contrast, total dietary fiber (TDF) content remained nearly constant regardless of thermal treatments, reflecting the concomitant decrease in insoluble dietary fiber (IDF). It was also found that water holding capacity (WHC) increased $20{\sim}75%$ due to thermal treatments employed in this research. Both bulk density and swelling were not directly relevant to WHC, but thier multiplication exhibited good correlation $(R^2=0.94)$ with WHC. Scanning elctron microscopy (SEM) exhibited that structure of raw wheat bran was significantly modified, whose degree and shape well reflected the types of thermal treatments.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.2
• /
• pp.645-655
• /
• 2019

In this study, colloidal microgel with viscoelasticity were prepared by using dispersion containing physical crosslinking agents and microgels with various strengths depending on the degree of cross-links.As the chemical crosslinking agent PEGDA400 content increased, hydrogels have various physical properties the swelling ratio decreased from $2.0{\times}10^4%$ to $6.0{\times}10^3%$ and increased viscosity by about 60%. The colloidal microgel was prepared with micro hydrogel grinded to $100{\mu}m$ size and the rheological behavior was confirmed with physical cross linking agent. A colloidal microgel having various viscosities was prepared by controlling starch and alginate based on micro-hydrogel containing 0.75% (w/v) of PEGDA400. In conclusion, these results would be highly useful for applying as a product that can give various physical properties to the colloidal suspensions, cosmetics, paint, and food industry.

• Applied Biological Chemistry
• /
• v.30 no.2
• /
• pp.179-185
• /
• 1987

The physicochemical properties and characteristics of sweet potato starches which were isolated from the six varieties were investigated. The shapes of starch granules which observed through photomicroscope and scanning electron microscope lucre round and polygonal, but those of the Shinmi were most polygonal, and the average diameters were in the range of $10.4{\sim}14.2$ microns. The amylose contents were between 25% and 28%, and blue values and alkali numbers were in the range of $0.29{\sim}0.36$, $7.0{\sim}12$, respectively. The swelling power and solubility patterns of the starches were negligible until $50^{\circ}C$, thereafter it increased rapidly and the Eunmi showed highest water binding capacity of 211.6%. Amylogram pattern of 6% starch solutions were similar to no peak viscosity, but maximum viscosity varied widely with varieties. A significant positive correlation was observed between amylose content and average gelatinization temperature. Taste and texture of the steam cooked sweet potatoes were negatively and positively correlated with moisture and amylose contents, respectively, while those of the microwave cooked sweet potatoes were only positively correlated with amylose contents.

• Korean journal of food and cookery science
• /
• v.22 no.2 s.92
• /
• pp.147-157
• /
• 2006

To improve the properties of non-waxy rice flours for baking, soaked-wet milled rice flour (SWRF) was adjusted moisture content (MC) to 30 and 50 % and heated at 50 and $70^{\circ}C$ in a shaking water bath for 6 and 18 hrs, respectively. Moisture-heat treated rice flours were investigated with regard to particle size distribution, and morphological, physicochemical and pasting properties for comparing dry and wet milled flours. The particle size of rice flour treated with 30% MC was distributed between $4-20{\mu}m\;and\;100-200{\mu}m$, like SWRF. The particles above $200{\mu}m$ in the flour were produced at higher heating temperature. By SEM, starch granules were found in the rice flours treated with 30% MC, who whereas aggregated starch granules were shown in the flours treated with 50% MC. Moisture-heat treatment using higher MC and heating temperature decreased the lightness and increased the yellowness of non-waxy rice flours. Water binding capacity of 30% moisture treated rice flour was similar to that of SWRF. In the same moisture treated rice flour, swelling power was higher, but solubility was lower at $50^{\circ}C$ than at $70^{\circ}C$. The initial pasting temperature by RVA increased after moisture-heat treatment. The peak viscosity of moisture-heat treated rice flour was higher for 30% moisture than that of the others. The rice flour treated with 30% MC and heated at $50^{\circ}C$ showed low setback and increased stability for retrogradation.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.56 no.3
• /
• pp.219-225
• /
• 2011

The physicochemical properties of rice endosperm from five rice varieties and effects of milling on baking bread properties of rice flour were investigated. Five rice varieties exhibited different level of amylose content. The ratio of longer amylopectin chain length to the distribution of endosperm starches was the highest in Goami3. According to the RVA measurement of rice flours, the pasting temperatures of Seolgaengbyeo and Goamibyeo were lower than those of the other rice varieties. There were differences in the changes of swelling power of rice flour under increasing temperature. Each rice flour sample for bread-making was processed into two different particle size by using an air-classification mill, and significant differences were observed among cultivars in the average particle size and damaged starch content of rice flours. Rice flour of Seolgaengbyeo with fine particle size showed the highest value in specific volume after baking.

• Korean journal of food and cookery science
• /
• v.29 no.2
• /
• pp.129-135
• /
• 2013

The objective of this research was to investigate physicochemical properties of waxy sorghum flours by different milling methods (pin mill and ultra fine mill). Four different sorghum flours were used for the experiments ; PWS (pin milled whole sorghum flour), PS (pin milled sorghum flour without bran), UFWS (ultra fine milled whole sorghum flour), UFS (ultra fine milled sorghum flour without bran). The contents of crude ash and total dietary fiber were the highest in PWS. Amylose content of pin milled sorghum flour was higher than that of ultra fine milled flour. The mean particle size of pin milled flours was six times lager than ultra fine milled flours. The L values of UFS and UFWS were higher than those of PS and PWS, whereas a and b values were higher in PWS. The water binding capacity was highest in UFWS, and solubility was higher in PS and UFS. Swelling power of flours was highest in UFS. The damaged starch content was higher in PS and UFS, which means damaged starch of sorghum flours significantly affected by polishing than milling method. The pasting properties were higher in the pin milled flours. Initial pasting temperature of pin milled flour was ranging from 70.5 to $73.1^{\circ}C$, which are higher than ultra fine milled flour ($68.6^{\circ}C$). The contents of total polyphenol were higher in PWS and UFWS than those of PS and UFS, there was no difference between the two milling methods. The results of this study indicate that physicochemical properties of sorghum flour were affected by milling methods as well as bran.

• Korean Journal of Food Science and Technology
• /
• v.23 no.3
• /
• pp.341-348
• /
• 1991

Physicochemical properties and gelatinization patterns of defatted and lipid-reintroduced moist (Hwangmi) and dry (Suwon 147) type sweet potato starches were investigated. Starch granules of sweet potato were polygonal and round, and the sizes of starch granules ranged $5{\sim}13\;{\mu}m$. All starches showed Ca type in X-ray diffraction but relative crystallinity was decreased by defatting and reintroduction. The amylose content of defatted starches increased, but that of lipid-reintroduced starches decreased. The swelling power and solubility at each temperature increased by defatting, but decreased by reintroduction. Transmittance of Hwangmi and Suwon 147 showed a rapid increase at $60,\;65^{\circ}C$, respectively. The initial pasting temperature by amylograph of Hwangmi and Suwon 147 were $67.5^{\circ}C\;and\;72.7^{\circ}C$, respectively. The peak viscosity and the height at $50^{\circ}C$ on amylogram of Hwangmi were lower than those of Suwon 147. Hot paste viscosity and setback decreased by defatting but setbak and consistency drastically increased by reintroduction. The peak temperature for gelatinization by the DSC was $65.7^{\circ}C$ for Hwangmi and $68.5^{\circ}C$ for Suwon 147. The gelatinization temperature and enthalpy of the DSC decreased and amylose-lipid melting peak was lost by defatting. The gelatinization temperature and enthalpy decreased by reintroduction.

• The Korean Journal of Food And Nutrition
• /
• v.32 no.4
• /
• pp.355-363
• /
• 2019

This study was conducted to explore the quality characteristics of colored rice depending on the cultivars (Jeogjinu, Josaengheugchal, Joeunheukmi, Heukjinjubyeo, Hongjinju, Heukjinmi, Geongganghongmi) for porridge. The moisture, crude protein, lipid, ash, amylose and damaged starch contents of colored rice ranged from 10.05~11.23%, 7.72~8.69%, 2.68~3.26%, 1.62~1.88%, 6.29~20.31% and 5.06~8.26%, respectively. The highest moisture (11.23%), crude protein (8.69%), lipid (3.26%) and ash (1.88%) contents of colored rice were detected in Heukjinjubyeo, Joeunheukmi, Josaengheugchal and Heukjinmi, respectively. The lowest amylose and damaged starch contents of colored rice were detected in Josaengheugchal and Joeunheukmi, respectively. In general, the water binding capacity, water solubility and swelling power of Heukjinmi were greater than those of the other cultivars. The investigation of the pasting properties (peak, trough, break down, final and setback viscosity, peak time, pasting temperature) of colored rice indicated a low value in Josaengheugchal. The lowest hardness (13,673.25 g) of colored rice was observed in Heukjinjubyeo while the highest digestibility (5.44 glucose mg/g) of colored rice was observed in Josaengheugchal. These results indicated that Josaengheugchal are suitable cultivars for porridge.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.62 no.3
• /
• pp.184-192
• /
• 2017

Rice flours from five rice (Oryza sativa L.) varieties with different amylose content were prepared by both wet and dry milling processes. The moisture content of wet-milled rice flours (WMR) was approximately three-times higher than that of dry-milled rice flours (DMR). Water absorption index (WAI), water solubility index (WSI), and swelling power (SP) increased in proportion to temperature. The WAI, WSI and SP values of DMR were higher than those of WMR. Baeokchal (BOC), which is a waxy rice cultivar, had a significantly high WSI value. Pasting properties of DMR, except for the BOC cultivar, resulted in an increase in peak, trough, final, and setback viscosities. The levels of resistant starch in four cultivars, except for Dodamssal (DDS), were under 1%, irrespective of the milling process, whereas the resistant starch contents of DMR and WMR in DDS were 9.18% and 6.27%, respectively. In vitro digestibility of WMR was higher than that of DMR, and the estimated glycemic index of the rice flour varieties ranged from 57.6 to 81.3. Damaged starch content of WMR was less than that of DMR; in addition, a negative correlation was observed between the amylose and damaged starch contents of WMR. These results suggest that the properties of rice flour vary depending on the milling method and flour variety, and could be a reference for selecting the appropriate processing method.