• Journal of Oral Medicine and Pain
• /
• v.42 no.2
• /
• pp.29-34
• /
• 2017

Purpose: To evaluate aggravating factors of intermittent locking among temporomandibular joint using magnetic resonance imaging (MRI) and diagnostic criteria for temporomandibular disorder (DC/TMD) diagnosis. Methods: A retrospective analysis was conducted of 35 patients with intermittent locking history but normal intra-articular findings between September 2012 and June 2015 in Kyung Hee University Dental Hospital. A standardized DC/TMD assessment was performed on subjects with MRI findings. Clinical findings were assessed on the basis of maximum mouth opening (active & passive), self-reported habits, patients' age, gender, systemic diseases at the initial visit. First, chi square test was used to examine differences with variables and then risk factors for intermittent locking were assessed using multivariate logistic regression. Results: Self-reported bruxism was strongly associated with intermittent locking history. Conclusions: The new DC/TMD protocol is intended for use within any clinical setting and supports the full range of diagnostic activities from screening to definitive evaluation and diagnosis. Self-reported sleep bruxism has been associated with a higher likelihood of intermittent locking. Comorbidity is therefore a factor that must be assessed. It is necessary to consider the amount of contact of the teeth and the duration.

• The Journal of Advanced Prosthodontics
• /
• v.7 no.3
• /
• pp.233-239
• /
• 2015

PURPOSE. This study aimed to evaluate the fit of zirconia ceramics before and after veneering, using 3 different veneering processes (layering, press-over, and CAD-on techniques). MATERIALS AND METHODS. Thirty standardized zirconia CAD/CAM frameworks were constructed and divided into three groups of 10 each. The first group was veneered using the traditional layering technique. Press-over and CAD-on techniques were used to veneer second and third groups. The marginal gap of specimens was measured before and after veneering process at 18 sites on the master die using a digital microscope. Paired t-test was used to evaluate mean marginal gap changes. One-way ANOVA and post hoc tests were also employed for comparison among 3 groups (${\alpha}$=.05). RESULTS. Marginal gap of 3 groups was increased after porcelain veneering. The mean marginal gap values after veneering in the layering group ($63.06{\mu}m$) was higher than press-over ($50.64{\mu}m$) and CAD-on ($51.50{\mu}m$) veneered groups (P<.001). CONCLUSION. Three veneering methods altered the marginal fit of zirconia copings. Conventional layering technique increased the marginal gap of zirconia framework more than pressing and CADon techniques. All ceramic crowns made through three different veneering methods revealed clinically acceptable marginal fit.

• The Journal of Korean Academy of Sensory Integration
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2005

Objective : The purpose of this study was to indicate the foundational data to standardize MVPT-R for Koreans. Method : This study was conducted on 221 children ranging in all preschool age from 4 to 6 years residing in Busan and Kyungsangnam-do. It was performed from January 12, 2004 to April 30, 2004. Result : First, similar to American children, as Korean children grow older, the mean raw score of MVPT-R increased. Second, Korean children's mean raw score was higher than that of American children; 3.51 in 4 age, 1.52 in 4.6 age, 2.93 in 5 age, 1.72 in 5.6 age, 1.84 in 6 age and 0.48 in 6.6 age. Third, the mean of PQ(106.57) in Korean children was higher than that of PQ in American children. Fourth, The raw score in Korean children was higher than the raw score in American children in most of the subjects(excluding visual closure subjects). Conclusion : The visual perception skill of Korean children is higher than that of American children. If we apply MVPT-R developed in U.S to Korean children, it will be difficult for Korean children to achieve the adequate results. Therefore, we must use the standardized MVPT-R for Korean that can minimize the differences between American and Korean children's visual perception skills.

• Korean Journal of Social Welfare
• /
• v.60 no.1
• /
• pp.103-125
• /
• 2008

Recently, it has been observed that social workers in Korea face diverse difficulties in designing social work programs. These difficulties require researchers to conduct a study on the contextual features of the difficulties. This study is to analyze the characteristics of the social work program proposals on the basis of program components. Research method used in the study is content analysis. Two researchers developed the analytic tool based on literature review and a pilot test, and analyzed 73 proposals submitted to a private welfare foundation from nationwide social work agencies in 2005 and 2006. As a result, although each program was designed in a proposal according to standardized form, there were creative diversities in designing social work programs. In addition, there were confusions in the three areas: conceptual and logical confusion, research and analytical confusion, and concrete and procedural confusion. Finally the researchers suggested several tasks and recommendations for the areas of research, education, and practice to solve these confusions in Korea.

• Journal of the Korean Data and Information Science Society
• /
• v.27 no.2
• /
• pp.337-351
• /
• 2016

There exist many real situations that statistical decision problems are classified into more than two categories. In these cases, the concordance statistics by the pair approach are mostly used. However, the expression of the classification of categories are ambiguous. Recently, the standardized evaluation data and re-expressed concordance statistics are defined and could be explained their meanings. They have still some non-specific problems for standard criteria of the statistics. Since these can be considered between result and truth categories additionally, two alternative concordance statistics might be proposed in this paper. Some advantages are founded that the proposed statistics could be discriminated all possible cases for two randomly selected categories. Moreover since the proposed statistics are represented with indicator functions, these could be transformed non-parametrically, so that these concordances are used for hypothesis testing.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.8
• /
• pp.791-797
• /
• 2013

This paper proposes a new way to verify the performance of an absorber lined shielded enclosure(ALSE) in accordance with CISPR25, EMC standards dedicated to testing automotive components. CISPR16 requires the use of NSA and VSWR methods to test the performance of a chamber. As for CISPR25, however, there hasn't been standardized ways to verify the performance of ALSE. This paper purports to present an improved method for the verification based on a long-wire antenna method under discussion at CISPR25 JFT. Existing discussions on a long-wire antenna method proposes that an antenna should reach 500 millimeters in length, while this paper adopts the antenna length of 1,700 millimeters. This paper also assesses the effects of matching conditions and studies problems related to methods which have been already proposed and key parameters in order to improve verification methods.

• The Journal of Korean Physical Therapy
• /
• v.28 no.5
• /
• pp.321-327
• /
• 2016

Purpose: The purpose was to link items of questionnaires that measure functioning and disability of persons with Low Back Pain (LBP) into the International Classification of Functioning, Disability and Health (ICF). Methods: The Oswestry Disability Index (ODI), Roland and Morris Disability Questionnaire (RM), Fear-Avoidance Beliefs Questionnaire (FABQ), and Short Form-36 health survey (SF-36) were evaluated to map items of those questionnaires into the ICF categories. The linking rule was employed and linking was performed independently by 10 health professionals. One-hundred and two patients with LBP were recruited from 19 medical institutes to this study for a field test to examine relations between the scale and its linked ICF category set. Pearson correlation coefficient was used to analyze their relationships. Results: Walking was only found to be one-to-one linking between the scale and the ICF. Sixty questions in FABQ were to be linked to 9 of ICF categories. Ten and 14 ICF categories were able to be linked to RM and ODI respectively. It was found that majority of items from ODI and RM scale had similar concept and linked to the same ICF category. SF-36 had only 15 categories of the ICF linked. Strong relationship was observed between measurement scales and linked ICF code sets (r=0.79, r=0.65, r=0.47, and r=-0.31 for ODI, RM, FABQ and SF-36 respectively). Conclusion: It was found that commonly used clinical tools for LBP may be linked to ICF. The study results may suggest that clinical data can be standardized to communicate between related professionals.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.5
• /
• pp.27-33
• /
• 2003

G-code, another name of ISO6983, has been a popular commanding language for operating machine tools. This G-code, however, limits the usage of today's fast evolving high-performance hardware. For intelligent machines, the communications between machine and CAD/CAM departments become important, but the loss of information during generating G-code makes the production department isolated. The new standard for operating machine tools, named STEP-NC is just about to be standardized as ISO14649. As this new standard stores CAD/CAM information as well as operation commands of CNC machines, and this characteristic makes this machine able to exchange information with other departments. In this research, the new CNC machine operated by STEP-NC was built and tested. Unlike other prototypes of STEP-NC milling machines, this system uses the STEP-NC file in XML file form as data input. This machine loads information from XML file and deals with XML file structure. It is possible for this machine to exchange information to other databases using XML. The STEP-NC milling machines in this research loads information from the XML file, makes tool paths for two5D features with information of STEP-NC, and machines automatically without making G-code. All software is programmed with Visual $C^{++}$, and the milling machine is built with table milling machine, step motors, and motion control board for PC that can be directly controlled by Visual $C^{++}$ commands. All software and hardware modules are independent from each other; it allows convenient substitution and expansion of the milling machine. Example 1 in ISO14649-11 having the full geometry and machining information and example 2 having only the geometry and tool information were used to test the automatic machining capability of this system.

• Journal of the Korean Geographical Society
• /
• v.36 no.2
• /
• pp.177-190
• /
• 2001

As standardized test and current perfomance assessment have some problems in the aspects of contextuality, authenticity and intelligence faimess, the aim of this study is to propose an 'intelligence-fair and authentic assessment(IFAA)as an appropriate altemative and to make sure of the probability of its application. In geographical education, an idealistic assessment can be realized when the tasks bear authenticity, multiple intelligence of students are accepted and the objective are confirming with general purpose. IFAA model consists of 5 elements. They are the selecting for strategic ideas, the developing a real-life task, the constructive instructing with teacher, the offering opportunity of multiple representation and the allotting of marks for each items, IFAA model proposed in this study is worth considering in educational validity and realistic adaptability.

• Korean Journal of Community Nutrition
• /
• v.16 no.2
• /
• pp.278-293
• /
• 2011

The purpose of this study was to examine the research trend of nutrition for the recent 12 years from 1996 to 2007 by analyzing 734 articles published in the Korean Journal of Community Nutrition. The majority of the articles (61.4%) were classified as survey types in terms of data collection methods. Most of the subjects used in the articles were adults (28.8%), and the subject whose research has been increased at the highest rate was "patients". The most frequent keywords in the title of articles were "nutrient intake" (231times), "food service" (92times), "dietary habits" (69times), and "obesity" (69times). The keywords that have appeared more frequently with the years were "osteoporosis" (450.0%), "menopause" (350.0%) and "dietary attitudes" (208.3%). As for research interests, "nutrient intake" was dominant in the early stage of research while "disease", "dietary habits", "dietary attitudes" and "nutrition education" have increased in recent years. Some of the most common methods of nutrition assessment were "dietary intake" (41.2%), "anthropometric" (34.0%) and "biochemical test" (14.7%). The most common methods of dietary intake were "24-hours recall" (28.6%) and "dietary habits" (23.3%). The results of this study showed some biases in data collection methods, gender of the subjects, and study areas. Moreover, inconsistent terminologies, questionnaire contents, and measures were used for the researches on dietary behaviors, dietary habits, dietary attitudes, which made it difficult to compare their results for each research. Therefore, standardized research methods and terminologies need to be developed regarding dietary practices.