• 수산경영론집
• /
• 제45권1호
• /
• pp.33-47
• /
• 2014

The purpose of this study is to find method to meet the greater retailer's supplier assessment requirement So, this study analyze the greater retailer's requirement for supplier assesment and research global standard which is used instead of supplier assessment requirement that is recognized by global retailers initiative. Next, this study analyze domestic aquaculture certification requirement and compare the global standard with the domestic requirement by using The Most Similar Systems Design. As a result, this comparing has founded all of two domestic certifications are similar to global standard's Good Aquaculture Practice module but those are a little bit different from System Element module. Therefore, this study suggest tree alternative. First, make up for the weak points in the current domestic aquaculture certification system. Second, the introduction of global aquaculture management system certification as supporting by government. Third, development of new standard in accordance with global food standard. This study has major implications for research into development of domestic aquaculture standard.

• 한국멀티미디어학회논문지
• /
• 제19권3호
• /
• pp.595-602
• /
• 2016

With the evolution and development of many kinds of healthcare devices and techniques, u-health standards have emerged as a major issue. Yet, most legacy medical devices and systems are still being used without deployment of the standards. Therefore, it is required to support backward compatibility for u-health standard-compliant systems to communicate with legacy non-standard medical and healthcare devices. This paper proposes a new scheme to support backward compatibility of IEEE 11073 system by adding a codec module to IEEE 11073 agent. The codec converts data sent by non-standard health devices to IEEE 11073 MDER data. Plus, we implemented the proposed IEEE 11073 agent with an Intel Edison board which is one of popular open source H/W platforms. The IEEE 11073 manager of the proposed system can monitor and control legacy non-standard devices through the proposed agent system. In our experimental results, we examined the proposed system can support interoperability between u-health standard and non-standard devices and contribute to the growth and expansion of u-health services.

• KIEAE Journal
• /
• 제14권1호
• /
• pp.39-48
• /
• 2014

In the previous test, the verification of the standard floor impact source was carried out comparing the physical characteristics with living impact sources. The result was appeared the validation of the standard impact source was very low because of differences of physical characteristics. This study aims to evaluate annoyance and loudness of standard impact source which is used for the measurement of floor impact sound, and to compare the annoyance and loudness of living impact sources which are produced in real life. The impact sources considered are tapping machine, tire and impact ball as standard sources, and nine real sources which were chosen from the existing researches. The result showed differences of annoyance and loudness between standard impact sources and living impact sources, which means the standard impact sources may rate the performance of floor system inappropriately. In the future, the rating method should be examined how the standard impact sources are similar with real sources in the point of rating the performance of floor system.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 Ⅲ
• /
• pp.1363-1366
• /
• 2003

This paper introduces computerized version of Hangout(Korean Language) Standard Pronunciation Rule that can be used in Korean processing systems such as Korean voice synthesis system and Korean voice recognition system. For this purpose, we build Petri net models for each items of the Standard Pronunciation Rule, and then integrate them into the vocal sound conversion table. The reversion of Hangul Standard Pronunciation Rule regulates the way of matching vocal sounds into grammatically correct written characters. This paper presents not only the vocal sound conversion table but also character conversion table obtained by reversely converting the vocal sound conversion table. Making use of these tables, we have implemented a Hangeul character into a vocal sound system and a Korean vocal sound into character conversion system, and tested them with various data sets reflecting all the items of the Standard Pronunciation Rule to verify the soundness and completeness of our tables. The test results shows that the tables improves the process speed in addition to the soundness and completeness.

• 한국주거학회:학술대회논문집
• /
• 한국주거학회 2009년 춘계학술발표대회 논문집
• /
• pp.236-239
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 한국주거학회논문집
• /
• 제20권3호
• /
• pp.59-67
• /
• 2009

Since 1990s, we have achieved a certain level of success in standardization of design, construction, and material on housing and public buildings with the national-level promotion. A practical connecting device that can synthesize all the serial processes is required to maximize the effect of construction material standardization. However, desired outcome of the standardization is not achieved yet because these serial standards and notification practices are decided by each part of the process and some are congested. In this study, we aim to improve a general organizational system of Korean Industrial Standard (KS) which is the most fundamental tool for the standardization of construction materials moving from a conventional idea that the standard is only for the material and components producers to a concept that can also be shared by the designers and construction workers. To achieve this, we propose an improvement plan for the Korean Industrial Standard in the perspective of three-tier classification system.

• 한국한의학연구원논문집
• /
• 제18권2호
• /
• pp.131-137
• /
• 2012

Objectives : Primo vascular system is known to new circulatory system and suggested as a anatomical structure of meridian system. Primo-vessels are present throughout the whole body. The purpose of this study is to identify primo tissues taken from falciform ligament and to compare with organ surface primo tissue, blood vessel and lymph vessel. Methods : Male Sprague-Dawley rats (8weeks old, 250~320g) used for this study. The medial line of the abdomen was dissected and searched for primo tissues in falciform ligament and on the internal organs using stereomicroscope. We performed serial cross section and histological investigations. The tissues were stained with hematoxylin-eosin and Masson's trichrome. Results : 1. The primo tissues attached on the falciform ligament had white color and length of 5~8mm. 2. We could observe primo tissues are classified with ligament tissues. 3. Histologically, primo tissue on falciform ligament and organ surface primo tissue could be considered same tissue. Conclusions : In this study, we observed primo tissue discovered on the falciform ligament. And we also histologically compared such discovered primo tissue with organ surface primo tissue. Consequently, we could consider that two tissues have histological similarity and possibility of connection in one network system.

• 무역상무연구
• /
• 제50권
• /
• pp.109-136
• /
• 2011

Bank Guarantee system is commonly used as useful financial instruments to support various overseas and domestic business activities by providing bank guarantees. Therefore, it will be able to develop as a useful socio-economic useful system. However, some procedural problem can arise from the processes under demands for payment. Therefore, it is very important to review the requirements of the demand for payment and compliance standard for the examination of a presentation under the guarantee system. It is necessary to examine main issues under the revised URDG 758. The URDG introduced the same examination principle of "need not be identical to, but shall not conflict with' as that of UCP 600. The main changes of the URDG 758 like this imply the mitigation of the compliance standard for examination. So, This paper is to provide a comparative study of the regulations and laws for the examination standard and propose their implications and practical notes under bank guarantee system. For this purpose, this study will be examined the practical and legal issues focusing on the relative regulations of the revision URDG 758. It will also be reviewed and compared with the URDG, ISP98, UCP 600 and so on.

• 융합보안논문지
• /
• 제2권2호
• /
• pp.109-121
• /
• 2002

정보기술의 발달로 보안사고가 증가되면서 침입차단 시스템, 침입탐지 시스템 및 가상 사설망 등의 기능이 통합된 보안 관리 시스템(ESM)의 개발에 대한 요구가 증가되고 있다. 그러나, 불행하게도 개발자들은 관련 표준의 미비로 어려움을 겪어왔다. 최근 ISTF가 침입차단 시스템 및 침입탐지 시스템의 로그 형식 표준을 발표하였으나 실제적으로 효율적인 ESM을 위해서는 이벤트 및 제어 메시지 등의 추가적인 표준 개발이 요구된다. 본 연구는 ISTF 표준을 분석하고 침입차단 시스템 및 침입탐지 시스템의 이벤트 및 제어 표준을 제안하고자 하며, 본 연구 결과는 ESM의 개발과 지속적인 관련 표준 개발에 도움이 될 것이다.

• 전기학회논문지P
• /
• 제57권1호
• /
• pp.6-13
• /
• 2008

National standard system for calibrating current transformer(CT) up to primary current of 20,000A have been established. The system consists of 20,000 A AC high current source, CT comparator, standard CT, CT under test and CT burden. An AC high current is applied tn the primary windings of both the standard CT and the CT under test, and then the CT comparator measures the ratio error and the phase displacement by comparing the secondary currents of the two transformers. As a validity check for 20,000 A CT calibration system, the comparison with the two national standard institutes(NMIs) has been performed using same CTs. The comparison results of the CTs are consistent with those measured at two NMIs within 0.004 % for ratio error and 0.1 min for phase displacement in the primary current ranges of Ip = 10 - 20,000 A with a secondary current of Is = 5 A.