• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2005.05a
• /
• pp.61-65
• /
• 2005

This paper describes the cut off time and the current characteristics of virgin RCDs and deteriorated ones in the seashore. The RCDs(Residual Current Protective Devices) are used for protecting the human body from electrical shock and for preventing facility accidents. According to the Korean standards, the RCDs are installed in panel boards. When RCDs are installed outside, they must be enclosed inside waterproof cases. In the case that RCDs are employed at temporary power sites and electrical facilities on the road they are exposed to the external environment. As a result, the RCDs deteriorated in the seashore for 3 months showed high failure rate, while the virgin RCDs all complied with Korean Standard. Considering that the RCDs are used under exposed condition outside, the reliance of RCDs must be ensured by modifying the related regulations and codes and by developing improved advanced in their performance.

• Korean Institute of Interior Design Journal
• /
• no.38
• /
• pp.3-13
• /
• 2003

Now that 15 years have passed since its introduction to 4 year college in Korea and we have 51 majors in the field of Intoner design established at 47 universities as of 2003, we are in the position to seek the improvement of its educational qualify. With a view to provide data for the setup of proper educational purpose, it has classified their divisions(departments) according to their major names and belonged colleges of the universities and considered their geographical distributions, groupings of curriculum, their framing and features of a standard curriculum. 1)Divisions of the universities where the major of interior design belongs are divided into three categories of design division (design 8t arts, arts), home economics division (home economics, natural science) and architectural division. For the development of the major, universities to which circumstances permit are recommended to establish an independent college of interior design following the . cases in the US. 2) Geographical preponderance of interior design major on Seoul and Gyeongsang Province is desired to be improved. 3) Curriculum of interior design, which is classified into introduction, history of interior design, theory of interior design, design of interior space, digital technology, design elements of inner space, technology of interior design, behavior of environmental psychology, design management and other subjects, was made into a table by divisions. To sum up, curriculum of interior design concentrates on basic design theory throughout all divisions. In connection with the selection of division by high school-graduates or their parents, design division is recommended for those who desire to major in design elements and design management, home economics division for those who desire to major in space design and behavior of environmental psychology and architectural division for those who desire to major in Interior space design, interior design technology and regulations. 4) This research can contribute to the settlement of desirable curriculum for the interior design education, thus upgrading the education level of the major in Korea.

• Journal of Pharmacopuncture
• /
• v.12 no.4
• /
• pp.33-50
• /
• 2009

Objectives : This study was conducted to confirm validation and stability of concentration analysis method of pure melittin (Sweet Bee Venom-Sweet BV) extracted from the bee venom by utilizing protein isolation method of gel filtration. Methods : All experiments were conducted at Biotoxtech, a non-clinical studies authorized institution, under the regulations of Good Laboratory Practice (GLP). Standard solutions of melittin (SIGMA, USA) and test substances were dispensed and were analyzed with HPLC for Sweet BV to secure the validation of analysis. Results : 1. Measurement of system suitability of Sweet BV satisfied criterion of below 3%. 2. Confirming Linearity of Sweet BV in 10-200${\mu}g/m\ell$ solution yielded correlation coefficient (r) of 0.995 and accuracy of 85-115% which satisfy criterion. 3. Measurement of Specificity of Sweet BV didn't yield any substance affecting the peak of test substances, but detected at 21.22min verified as the test substance. 4. Confirming Intra-day of Sweet BV, accuracy and precision of 0.1, 100${\mu}g/m\ell$ were 105.70, 95.81 and 0.66, 0.73, respectively, satisfying both criteria of accuracy (85-115%) and precision (within 10%). 5. To measure Stability in autosampler, all samples used in Intra-day reproducibility sat in the autosampler for five hours and were re-analyzed. Both variability and precision satisfied the criteria. 6. Homogeneity of Sweet BV (0.1, 100${\mu}g/m\ell$) at upper, middle, and lower layers all satisfied the accuracy and precision criteria. 7. Stability of Sweet BV (0.1, 100${\mu}g/m\ell$) at room temperature for four hours and refrigerated for 7 days all satisfied the criterion. 8. For the measurement of Quality control, QC samples measured on the first and eighth day all satisfied accuracy and precision criteria. Conclusion : Above experiment data satisfies validation and stability of concentration analysis method of Sweet BV.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.53 no.1
• /
• pp.41-48
• /
• 2017

Encircling gill net fishery is a kind of gill net which is generally used in shallow coastal waters. After the fish have been encircled by the gill net, noise stimulus such as a stone or sound is used to force them to gill or entangle themselves in the netting surrounding them. Although the fishing by a stone is a traditional fishing method, it is considered as an illegal fishing method by physical stimulus such as explosives and mechanical vibrator. However, this illegal fishing method has raised some problems to the fishing boat of other fisheries or many anglers due to disturb aggregating fish schools. This study is aimed to provide scientific base data to verify whether to impact the ecosystem caused by this encircling gill net. This study exhibited that the impulse noise by concrete sphere in the encircling gill net was $159dB/{\mu}Pa$, the ambient noise from ship engine was $160dB/{\mu}Pa$, and the maximum noise from continuous artificial vibrator was $175dB/{\mu}Pa$. These may be stimulus to the escape of fish distributed in a wide area in its natural state; it is not likely the cause of death due to catastrophic stress. Therefore, it needs to prepare the consideration of standard limit on fishing stimulus in fishing methods of the fishery laws and regulations, prevent fishermen form using illegal fishing gear (i.e. explosive sound standards: $200{\sim}220dB/{\mu}Pa$ and provide them with countermeasures.

• Journal of the Korean Society of Safety
• /
• v.32 no.3
• /
• pp.15-20
• /
• 2017

This study presented the strength of the materials and parts for smart distribution board fabrication, and developed a work operation process chart for smart distribution board fabrication. This work operation process chart for smart distribution board fabrication complied with SPS-KEMC regulations, and the applicable range and object are less than 1,000 V and 1,000 Hz for the AC distribution board and less than 1,500 V for the DC distribution board. The power supply is 3 phase 4 wires ($3{\Phi}$ 4W), divided into a single phase circuit and a 3 phase circuit. In addition, the circuit was configured so that the leakage current flowing through the distribution line of the load could be monitored in real time by using the sensor module installed at the rear end of the circuit breaker. Therefore, the administrator can easily find the risk factor of the load since engineer can check the leakage current of each distribution line. In addition, if a leakage current greater than standard value flows, it is possible to generate an alarm against a short circuit and cut off the leakage current. The work operation process chart for the smart distribution board fabrication consists of the following steps: raw and subsidiary materials, sheet metal work, tube making, welding, painting, busbar fabrication, assembly and wiring, product inspection, shipment, etc. Moreover, symbols, ${\Delta}$, ${\nabla}$, ${\bigcirc}$, ${\Rightarrow}$, etc. were used according to the type of work and work progress so that workers can easily understand the progress of the work.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.4
• /
• pp.365-370
• /
• 2012

International Organization for Standardization has recently published ISO 12215-5 which is the small craft-hull construction and scantling. According to ISO 12215-5 AnnexB, the scantling determination can be accomplished by drop test for craft with a length $L_H$ of 2.5m up to 6m and single-skin construction. The current method, however, of visual test has the issue where it is difficult to make an objective evaluation of ship body strength. In this study, in order to develop an evaluation system that can make a quantitative evaluation of the drop test of leisure boats, the domestic/foreign regulations on drop test of leisure boats are analyzed and the drop test evaluation system is designed, and the system applicability is reviewed through 5-meter level aluminum ship, and the issues incurred by the state of the ship and the posture while dropping were checked.

• Journal of the Korean Applied Science and Technology
• /
• v.29 no.3
• /
• pp.516-530
• /
• 2012

Gasohol which is the mixture of gasoline and ethanol, is used to gasoline vehicles worldwide currently. This study is performed by the methods of the review of references, and includes the background introduced, manufacturing processes, amounts produced, original properties, specifications, ways of applied currently, regulations and policies as a fuel for gasoline vehicles on individual countries through the scope of worldwide, especially focused on bioethanol and gasoline. By the reason above, it is prepared by focused on multiple angles for the person who want to getting information and searching desired ways in the future regarding to bioethanol and gasohol. It is concluded that gasohol is one of the useful renewable energies, and must to take a step forward by the approaching of multiple points, and finally showed some directions by the way of comparing of the situations and references nowaday.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.23 no.3
• /
• pp.515-530
• /
• 2013

The results of investigations into marine incidents have become an important basis in determining not only possible causes, but also the extent of negligence between the perpetrator and victim. However, marine incidents occur under special circumstances i.e. the marine environment, and this leads to difficulties in identifying causes due to problems in scene preservation, reenactment and acquisition of witnesses. Given the aforementioned characteristic of marine incidents, the International Convention for the Safety of Life at Sea (SOLAS) has adopted mandatory regulations on the carriage of Voyage Data Recorders (VDRs) and Automatic Identification Systems (AIS) for ships of a certain gross tonnage and upwards, so as to reflect recent developments in radio communication and marine technology. Adopted to provide an international standard for investigations and to promote cooperation, the Code of the International Standards and Recommended Practices for a Safety Investigation into a Marine Casualty or Marine Incident (Casualty Investigation Code) recommends member states to build capacity for analysis of VDR data. Against this backdrop, this paper presents methods for efficient investigations into the causes behind marine incidents based on data analysis of VDR, which serves as the black box of ships, as well as digital forensic techniques.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.10-19
• /
• 2016

Recently, according to a public order with BIM regulations, various technologies of facility management (FM) have been studied to use BIM data effectively. The technology for BIM-based FM, such as BIM data standard, BIM modeling, BIM server, and BIM-GIS platform, reverse engineering based on 3D image scans is developing constantly. On the other hand, there has been little research on the range of FM based on BIM, the role of actors by management works, the difference, and difference in effects between original FM and BIM-based FM. This study examined the scenario of architectural FM based on BIM and confirmed the effect. For this, after analyzing the research trends, the range of FM applications and the role of actors by management works were defined, and the effectiveness analysis of a BIM-based architectural FM scenario was deduced.

• Journal of the Korea Safety Management & Science
• /
• v.18 no.1
• /
• pp.9-15
• /
• 2016

In this study, the current regulations to be adequate in industrial site have to be renew in order to prevent the fatal injuries by mobile cranes. Fatal injury analyses were conducted with several accident cases by the mobile cranes. For each accident, the causes of the injuries were examined and proper safety measures were proposed. This study proposed a revision of the standard guideline as an accident prevention measures through in-depth analysis of fatal accidents. First, fatality rate per 10,000 persons by the mobiles cranes was 0.57 in 2011. Second, the in-depth analysis of the mobile crane accidents showed that the main factors of the accidents were the overturn of mobile crane, the fracture of connection part between mobile crane boom and rope, the breaking of rope and the misunderstanding over the signal between a mobile crane driver and workers around a mobile crane. Third, the order of high defection of connecting parts was bucket bolt, bracket and extension parts. Fourth, since there were several cases of overturn of mobile crane by itself in the in-depth analysis of the mobile crane, the over slop-proof device was proposed as the main alternative in this study. Fifth, the revision of standards of safety factor that shall be more than 10, of connecting parts of mobile crane was proposed.