• Land and Housing Review
• /
• v.3 no.1
• /
• pp.97-109
• /
• 2012

For the design of underpass structures, -1.0m(G.L) ground water level guideline for the design of railway, subway, utility tunnel etc, is still being used in Korea. As a result, the underpass structure can be forced by buoyancy, and therefore the in-situ buoyancy anchor method is usually being applied to prevent the uplifting force. For the Yeongjongdo sky city project, the drainage method was applied to remove the buoyancy force. In this study we estimate the efficiency and safety of the applied design and propose the detailed guidelines for standard design and maintenance of the guided drainage technique. Especially, the auxiliary pumping well was operated to maintain the ground water level around the underpass. In the study site, the applied guided drainage method has advantages in both engineering and economic aspects.

• Journal of the Society of Disaster Information
• /
• v.8 no.4
• /
• pp.319-327
• /
• 2012

This research collected work drilling report of TBM method site developed by WRITH company to TBM equipment company in Germany and analyzed work operating productivity. Based the data analyzed TBM operating productivity, This research derived and presented excavation speed(m/day) by TBM diameter (2.6m, 3.0m, 3.5m, 5.0m, 8.0m) and rock. Also, based on the excavation speed(m/day) by TBM diameter, This research estimated a day direct construction cost and total direct construction costs by applying a direct construction cost which spent on per 1m. Based on hard rock 40.0%, soft rock 30.0%, usually rock 20%, weathered rock 10.0%, TBM boring velocity, m per cost, total construction period shall estimate the construction cost and the construction period by the effective use by diameter when future applying TBM method to the basic planning stages and in the preliminary design phase.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.6
• /
• pp.563-569
• /
• 2020

Presenting the impact of meteorological disasters departs from the traditional weather forecasting approach for meteorological phenomena. It is important to provide impact forecasts so that precautions against disruption and damage can be taken. Countries such as the United States, the U.K., and France already conduct impact forecasting for heavy rain, heavy snow, and cold weather. This study improves and applies forecasts of the impact of heavy rain among various weather phenomena in accordance with domestic conditions. A total of 33 impact factors for heavy rain were constructed per 1 km grids, and four impact levels (minimal, minor, significant, and severe) were calculated using standard normal distribution. Estimated criteria were used as indicators to estimate heavy rain risk impacts for 6 categories (residential, commercial, utility, community, agriculture, and transport) centered on people, facilities, and traffic.

• Journal of Broadcast Engineering
• /
• v.16 no.5
• /
• pp.722-737
• /
• 2011

In this paper, we propose an estimation of network jitter that occurs when transmitting TCP packets containing MPEG-2 TS in progressive streaming service over wired or wireless Internet networks. Based on the estimated network jitter size, we can calculate required de-jitter buffering time to absorb the network jitter at the receiver side. For this purpose, by exploiting the PCR timestamp existing in the TS packet header, we create a new timestamp information that is marked in the optional field of TCP packet header to estimate the network jitter. By using the proposed de-jitter buffering scheme, it is possible to employ the conventional T-STD buffer model without any modification in the progressive streaming service over IP networks. The proposed method can be applicable to the recently developed international standard, MPEG DASH (dynamic adaptive streaming over HTTP) technology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.6A
• /
• pp.676-684
• /
• 2008

In digital video broadcasting-terrestrial (DVB-T), which is the European digital terrestrial television standard, the orthogonal frequency division multiplexing (OFDM) has been adopted for signal transmission. The main reasons using OFDM are to increase the robustness against the frequency selective fading and impulse noise, and to use available bandwidth efficiently. However, channel variation within an OFDM symbol destroys orthogonality between subcarriers, resulting in inter-carrier interference (ICI), which increases an error floor in proportional to maximum Doppler spread. This paper provides an ICI analysis in both time and frequency domains while existing literatures analyze the ICI effects mainly in frequency domain and proposes the algorithms that estimate the channel impulse response and channel variation using least square (LS) algorithm which is the most simple channel estimation technique. And we propose adaptive channel estimation algorithm that estimates the velocity of terminals. The simulation results show that proposed algorithm has similar performance with about 1.5% computational complexity of noise and ICI reduction LS algorithm in low speed environments.

• Journal of the Korean Electrochemical Society
• /
• v.2 no.1
• /
• pp.23-26
• /
• 1999

The Langmuir adsorption isotherm at the $(Pt)/0.1M\;H_2SO_4$ electrolyte interface has been qualitatively analyzed using the ac impedance measurement and phase-shift method. The phase shift $(\phi)$ depends on both the cathode potential (E<0) and frequency (f) and is inversely proportional to the factional surface coverage $(\theta)$. At an intermediate frequency band (ca. $1\~100$ Hz), the phase-shift profile $(\phi\;vs.\;E)$ can be related to the fractional surface coverage $(\theta\;vs.\;E)$. The phase-shift profile $(\phi\;vs.\;E)$ can be used as an experimental method to estimate and analyze the Langmuir adsorption isotherm $(\theta\;vs.\;E)$. The equilibrium constant (K) and the standard free energy $({\Delta}G_{ads})$ of the adsorbed hydrogen atom $(H_{ads})\;and\;3\times10^{-4}$ and 20.1 kJ/mol, respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.518-518
• /
• 2017

Since Korea lunched the 4 Major River Restoration Project, the hydrological regime which is one of the major determinants for riverine condition have actually changed. It also important to connect hydrological characteristics and vegetation. The objective of this study is to investigate the influence of hydrological regime on riverine vegetations and its successions. Iunundated exceedance probability concept are suggested to estimate rehabilitated and succession on the Binae island in the Han River. The result shows that the P=0.08 or lower IEPs should have the disturbance for vegetations, or should be changed to a hydrophilic ones. Therefore, agency which is mainly responsible for river and flow may have to be changed and considered flow regulation standard to conserve riverine zone.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.194-202
• /
• 2021

Ionosphere, one of the largest error sources, can pose potentially harmful threat to single-frequency GNSS (global navigation satellite system) user even after applying ionospheric corrections to their GNSS measurements. To quantitatively assess ionospheric impacts on the satellite navigation-based applications using simulation, the standard deviation of residual ionospheric errors is needed. Thus, in this paper, we determine conservative statistical quantity that covers typical residual ionospheric errors for nominal days. Extensive data-processing computes TEC (total electron content) estimates from GNSS measurements collected from the Korean reference station networks. We use Klobuchar model as a correction to calculate residual ionospheric errors from TEC (total electron content) estimate. Finally, an exponential delay model for residual ionospheric errors is presented as a function of local time and satellite elevation angle.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.38 no.11
• /
• pp.1618-1624
• /
• 2009

This study was conducted to estimate the shelf-life of cooked mung bean sprouts contaminated with Staphylococcus aureus according to storage temperatures after cooking in school foodservice operations. A predictive growth model of S. aureus in cooked mung bean sprouts prepared using a standard recipe was developed at 4 storage temperatures (5, 15, 25, and 35${^{\circ}C}$). To determine the effect of vinegar on the shelf-life of cooked mung bean sprouts, the growth of S. aureus in sprouts prepared using vinegar and the standard recipe were compared. The $R^2$ values of the specific growth rate (SGR) and lag time (LT) determined using the Gompertz model were greater than 0.90 at all temperatures except 5${^{\circ}C}$, which confirmed that it would be appropriate to use these parameters for a secondary model. The secondary model, which indicates changes in LT and SGR values according to storage temperatures, was calculated using response surface models. The compatibility of the developed model was confirmed by calculating $R^2$, Bf, Af and MSE values as statistic parameters. The $R^2$ values of LT and SGR were 0.94 or higher, and the MSE, Bf and Af values were 0.02 and 0.002, 0.97 and 1.03, and 1.31 and 1.10, respectively, with high statistical compatibility. The growth rate of S. aureus was higher when the standard recipe was used than when vinegar was used at all temperatures. Indeed, no growth of S. aureus was observed in mung bean sprouts prepared using vinegar. Based on the model developed, cooked mung bean sprouts prepared using the standard recipe for school foodservice should be stored at 10${^{\circ}C}$ or less. Additionally, sprouts stored at 25 or 35${^{\circ}C}$ should be consumed within 6 or 12 hours after cooking. Finally, the addition of vinegar will prevent the growth of S. aureus in cooked mung bean sprouts.

• Korean Journal of Construction Engineering and Management
• /
• v.6 no.4 s.26
• /
• pp.152-163
• /
• 2005

Pile driving work causes a vibration problem in the construction site using pile foundation and often causes civil affairs by construction noise around the construction site. For the vibration and noise problems, the driving after drilling method rather than the direct driving method is being generalized for reducing vibration and noise. However, this method also causes civil affairs when the driving work is operated in adjacent area. This study suggests a criterion for evaluating an optimal allowed distance for pile driving work by the driving after drilling method. Actual surveys of vibration and noise for pile driving work in seven construction sites were used for developing regression analysis equations. The results can be a standard to estimate the allowed distance to avoid vibration and noise problems in pile driving work for deep foundation.