• Atmosphere
• /
• v.25 no.2
• /
• pp.309-322
• /
• 2015

The objective of this study is to evaluate the impact of the high resolution topographies and landuses data on simulated meteorological variables (wind speed at 10 m, temperature at 2 m and relative humidity at 2 m) in WRF. We compare the results with WRF simulation using each resolution of the topographies and landuses, and with 37 AWS observation data on the Seoul metropolitan regions. According to results of using high-resolution topography, WRF model gives better topographical expression over domain. And we can separate more detail (Low intensity residential, high intensity residential, industrial or commercial) using high resolution landuses data. The result shows that simulated temperature and wind speed are generally higher than AWS observation data. However, simulation trend with temperature, wind speed, and relative humidity are similar to observation data. The reason for that is that the high precipitation event occurred in CASE 1 and 2. Temperature have correlation of 0.43~0.47 and standard deviation of $2.12{\sim}2.28^{\circ}C$ in CASE 1, while correlation of more than 0.8 and standard deviation of $3.05{\sim}3.18m\;s^{-1}$ in CASE 2. In case of wind speed, correlation have lower than 0.5 and Standard Deviation of $1.88{\sim}2.34m\;s^{-1}$ in CASE 1 and 2. In statistical analysis shows that using highest resolution (U01) results are more close to the AWS observation data. It can be concluded that the topographies and landuses are important factor that affect model simulation. However, the tendency to always use high resolution topographies and landuses data appears to be unjustified, and optimal solution depends on the combination of scale effect and mechanisms of dynamic models.

• Journal of the Korea Society of Computer and Information
• /
• v.13 no.2
• /
• pp.1-9
• /
• 2008

As the size of software becomes larger and the features of it become complex. it is really hard to successfully complete the project without following development guidelines. Software process is the best practices and procedures that organizations of high maturity and capability of software development carry out in common, and it is a set of progressive ideas of management. However, complicated and unfamiliar concepts can interrupt the introduction and improvement of software process of the organizations. Even though many kinds of frameworks such as standard of process and maturity measurement models are introduced, it is still difficult to follow software process without fully understanding their relations. The purpose of this study is to support successful internalization of organizations that introduce and use software process. It also suggests the design of standard ontology, standard relationship domain ontology, and the lifestyle of software process and the relations between them.

• Journal of the Korea Convergence Society
• /
• v.10 no.3
• /
• pp.395-400
• /
• 2019

The Web environment of the frontend domain is increasingly competitive to preempt the new standard of presentation layer. N-Screen, a service that enables users to seamlessly use one content in various devices in Korea, is competing for market preemption by recognizing it as a core service of the future. In the cloud computing, N-screen is a typical service type. However, most of the frontend research required for groupware in enterprise environments has been limited to responsive web design for the web and native apps for mobile. Gradually, the need for MVC design patterns is increasingly widening in enterprise environments to overcome the cultural differences of companies and to support one source multi-use strategy supporting multiple devices and development productivity. Therefore, in this study, we will analyze and design JPetStore with hybrid application design based on Spring MVC, e-government standard framework environment of next generation web standard, and provide reference model of frontend hybrid apps design in future enterprise environment.

• Geophysics and Geophysical Exploration
• /
• v.22 no.2
• /
• pp.56-61
• /
• 2019

In this paper, we studied efficient modeling strategies when we simulate the 3D time-domain acoustic wave propagation using a cell-based finite difference method which can handle the variations of both P-wave velocity and density. The standard finite difference method assigns physical properties such as velocities of elastic waves and density to grid points; on the other hand, the cell-based finite difference method assigns physical properties to cells between grid points. The cell-based finite difference method uses average physical properties of adjacent cells to calculate the finite difference equation centered at a grid point. This feature increases the computational cost of the cell-based finite difference method compared to the standard finite different method. In this study, we used additional memory to mitigate the computational overburden and thus reduced the calculation time by more than 30 %. Furthermore, we were able to enhance the performance of the modeling on several media with limited density variations by using the cell-based and standard finite difference methods together.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.4
• /
• pp.474-480
• /
• 2020

With the advent of the Fourth Industrial Revolution, many new technologies are being utilized. In particular, video signals are used in various fields. However, when transmitting and receiving video signals, salt and pepper noise and additive white Gaussian noise (AWGN) occur for multiple reasons. Failure to remove such noise when performing image processing can cause problems. Generally, filters such as CWMF, MF, and AMF remove noise. However, these filters perform somewhat poorly in the high-density noise domain and cause smoothing, resulting in slightly lower retention of the edge components. In this paper, we propose an algorithm by effectively eliminating salt and pepper noise using a modified weight filter using standard deviation. In order to prove the noise reduction performance of the proposed algorithm, we compared it with the existing algorithm using PSNR and magnified images.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.20 no.6
• /
• pp.110-116
• /
• 2021

W3C enacted RDF(Resource Description Framework based DCAT meta data standard, which is world-widely accepted so far. To guarantee the inter-operability and integrity of data from various sources and even from various countries, it is considered that transportation meta data should also follow the DCAT standard. But still, to represent the transportation domain-specific features, it is necessary to define new properties and vocabularies in addition to the DCAT standard. This research identified the additional properties and vocabularies for transportation metadata, considering uniqueness of transportation data. The revised RDF schema and RDF graph proposed in this research should be able to lead the transportation open data platform revitalization.

• Journal of Veterinary Clinics
• /
• v.26 no.3
• /
• pp.212-219
• /
• 2009

Anticholinergics, which are commonly given as a pre-anesthetic medication to prevent adverse effects in canine anesthesia, can cause cardiac adverse effects. To determine the effects of atropine and glycopyrrolate on the balance of sympathetic nervous tone and parasympathetic nervous tone of the heart during ketamine anesthesia in beagle dogs, heart rate variability(HRV), duration of anesthesia and behavioral changes were evaluated. There were no significant temporal domain differences between atropine and glycopyrrolate. Concerning the frequency domain component, atropine and glycopyrrolate effects were significantly lower(P<0.05) than the control saline-treated group. However, the root mean square of the interval differences between consecutive R peaks(RMSSD) and the standard deviation of Poincare plot perpendicular to the line-of-identity(SD1) in atropine were significantly decreased(P<0.05) from the baseline value, and the low frequency/high frequency ratio(LF:HF ratio) in glycopyrrolate was significantly increased from baseline value(P<0.05). The change of SD1 agreed with that of the high frequency(HF) in the frequency domain component and also with those of respiratory rate and $SpO_2-R$. Our results prove that glycopyrrolate is more suitable as a pre-anesthetic anticholinergic in ketamine anesthesia of dogs with respect to safety and duration of action.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2012.06a
• /
• pp.87-88
• /
• 2012

The IHO developed the S-100 standard for Digital Hydrographic Data in order to assist the proper and efficient use of hydrographic data and information for the safety of navigation and the protection of marine environment. The former model, S-57, was considered outdated to be utilized as the basis for the next-generation Electronic Chart(ENC) product specification. The key feature of the S-100 standard is the use of Registry and its components, Registers. This online-based Registry provides a universal standard that can be implemented in the actual performance of the navigation system with convenience. In the current situation, the only registry is owned by the IHO and it is available to domain experts. However, since S-100 is an international standard operated by an international organization, the process of the changes and updates of the data requires time before immediate implementation when demanded. Therefore, regarding the safety of navigation of the domestic users and mariners, a separate domestic registry is necessary to develop a domestic Information Registry. This study specifically aims to build a Registry based on IHO published S-99 through designing an adequate website dedicated for its purpose to provide collection of definitions and hydrographic data.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.247-254
• /
• 2011

This paper is a study on the practical Systems Engineering Management Plan(SEMP) for the LRT Project. A SEMP shall be developed and applied to define and manage the systems engineering activities during the beginning of LRT Project. This paper is addressed contents and description of the practical systems engineering management plan based on the existing practices about system engineering management plan in LRT Project domain as well as the systems engineering standard as MI-STD 499A, IEEE 1220 etc. In the early stage of a LRT Project, An acquirer should provide a Systems Engineering Plan(SEP), and a contractor should summit a Systems Engineering Management Plan as the SEP in proposal. This addressed the SEMP as an aspect of the system and sub-systems supplier to systematically and effectively accomplish the systems engineering activities in LRT Project generally.

• Journal of Power System Engineering
• /
• v.17 no.3
• /
• pp.23-27
• /
• 2013

In this research paper, we study on how to decrease the high vibration of turbine hood casings which are main facilities of power generation industry. Cause of Standard coal-fired power 500MW facilities turbine hoods' high vibration is that Natural frequency of hood casing designed in near domain frequency, when they are making hoods. We investigate to reduce high vibration at hood casing. We use FEM method to found how to avoid resonance, and test to confirm that our FEM result. We Finally attach minium mass plate at hood casing to avoid resonance and high vibration reduce lower $100{\mu}m$.