• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.359-364
• /
• 2006

Interference can seriously degrade the performance of GPS receiver because GPS signal has extremely low power at earth surface. This paper presents a Narrowband Interference Excision Filter (NIEF) in frequency domain that removes narrowband interferences with small signal loss. A NIEF transforms the received GPS signals with interferences into the frequency domain with FFT and then compute statistics such as mean and standard deviation to determine an excision threshold. All spectrums exceeding the threshold are removed and the remaining spectrums are restored by IFFT. A NIEF effectively can remove various and strong interferences with a simple structure. However, the signal power loss is unavoidable during FFT and IFFT. Besides the hamming window and overlap technique, a threshold-whitening technique and an adaptive detection threshold are adopted to effectively reduce the signal power loss. The performance of implemented NIEF is evaluated using real signals obtained by 12 bit GPS signal acquisition board. The output of NIEF is fed into the Software Defined Receiver to evaluate the acquisition and tracking performance. Experimental results shows that many types of interference such as single-tone CWI, AM, FM, swept CWI and multi-tones CWI are effectively mitigated with small signal power loss.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2C
• /
• pp.113-123
• /
• 2007

In Ubiquitous communication environment, various conversions of images are essential, and most digital images are compressed by standard methods such as the Joint Photographic Expert Group (JPEG) and Motion Picture Expert Group (MPEG) which are based on the discrete cosine transform (DCT). In this paper, various image resizing algorithms in the DCT domain are analyzed, and a new image resizing algorithm, which shows superior performance compared with the conventional methods, is proposed. For arbitrary-ratio image resizing in the DCT domain, several blocks of $8{\times}8$ DCT coefficients are converted into one block using the conversion formula in the proposed algorithm, and the size of the inverse discrete cosine transform (IDCT) is decided optimally. The performance is analyzed by comparing the peak signal to noise ratio (PSNR) between original images and converted images. The performance of the proposed algorithm is better than that of the conventional algorithm, since the correlation of pixels in images is utilized more efficiently.

• Clinical and Experimental Pediatrics
• /
• v.62 no.5
• /
• pp.187-192
• /
• 2019

Purpose: The importance of the neurodevelopmental outcomes of very-low-birth-weight (VLBW) infants has been emphasized as their mortality rate has markedly improved. This study aimed to assess the validity of the Korean Developmental Screening Test (K-DST), a developmental screening tool approved by the Korean Society of Pediatrics, for the timely diagnosis of neurodevelopmental delay in VLBW infants. Methods: Subjects included VLBW infants enrolled in the Korean Neonatal Network database between January 2012 and December 2014. The collected data were analyzed for sensitivity, specificity, positive predictive value, and negative predictive value (NPV) in the K-DST compared to those in the Bayley Scales of Infant Development-II for VLBW infants. Results: A total of 173 patients were enrolled. Their mean gestational age and mean birth weight were $27.5{\pm}2.8weeks$ and $980.5{\pm}272.1g$, respectively. The frequency of failed psychomotor developmental index (PDI) <85 was similar to that in at least one domain of K-DST <1 standard deviation. Failure in more than one K-DST domain compared with a mental developmental index (MDI) <85 showed a sensitivity and NPV of 73.2% and 75.0%, respectively. Failure in more than one K-DST domain compared with PDI <85 showed a sensitivity and NPV of 60.3% and 71.6%, respectively. Each K-DST domain had a stronger correlation with predicting a failing MDI <85 than a failing PDI <85 (P<0.05). Conclusion: K-DST could be a useful screening tool for predicting mental developmental delay in VLBW infants and referring them for neurodevelopmental assessments.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.183-186
• /
• 2005

A two dimensional (2-D) finite-difference time-domain (FDTD) method based on a novel finite difference scheme is developed to eliminate the numerical dispersion errors. In this paper, numerical dispersion and stability analysis of the new scheme are given, which show that the proposed method is nearly dispersionless, and stable for a larger time step than the standard FDTD method.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.367-372
• /
• 1999

In this paper, an inverter fed induction motor drive system is analyed in order to predict the conducted interference. High frequency model for inverter, motor and system parasitic components are proposed. High frequency component allows time and frequency domain analysis to be performed with standard PSpice tool. The overall high frequency component and model are verified by comparing simulation and experimental result.

• Journal of the Korean Mathematical Society
• /
• v.58 no.3
• /
• pp.791-797
• /
• 2021

In this corrigendum, we offer a correction to [J. Korean Math. Soc. 54 (2017), No. 2, 461-477]. We construct a counterexample for the strengthened Cauchy-Schwarz inequality used in the original paper. In addition, we provide a new proof for Lemma 5 of the original paper, an estimate for the extremal eigenvalues of the standard unpreconditioned FETI-DP dual operator.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.3
• /
• pp.441-461
• /
• 1995

This research proposes an Integrated Product Information Model (IPIM) using STEP (Standard for the Exchange of product model data) for Computer Integrated Manufacturing (CIM) of Concurrent Engineering (CE). IPIM is based on Geometry and Topology (STEP Part 42), Form Feature (STEP Part 48), and Tolerance (STEP Part 48) for representing the integrated information of mechanical parts. For the IPIM, 1) new entities are developed for integration of existing entities, and 2) the existing entities are restructured and modified for a special application protocol. In CIM or CE, the advantages of using IPIM having integrated form of geometry, feature and tolerance are 1) integration of product design, process design and manufacturing sequentially or concurrently. 2) keep the product data consistency, modified by different domain, and 3) automatic data exchange between different application software and different hardware. The prototype system is composed of CAD, Data Probe, DBMS and SDAI (Standard Data Access Interface), and the generated STEP data is stored in a step file of DBMS for other applications.

• International Journal of Vascular Biomedical Engineering
• /
• v.1 no.1
• /
• pp.3-12
• /
• 2003

Ultrasonic pulsed Doppler velocimetry has become a standard international method of classifying carotid disease. Because the measured angle adjusted velocity increases as the Doppler angle increases, examinations should be performed at a convenient standard Doppler examination angle. An angle of 60 degrees is achievable throughout most examinations. Multiple Doppler viewing angles allow the acquisition of velocity vectors during the cardiac cycle, revealing the complex velocity patterns. Ultrasonic velocimetry (whether Doppler or time domain) is based on changes in the phase of the ultrasound echo. Other examinations can be done based on the echo phase. Slow motions of organs such as the brain can be used to monitor changes in edema. Measurements of tissue strain due to the pulsatile filling of the arterioles. This plethysmographic imaging method can display differences in tissue perfusion because of different tissue types and changes in autonomic activity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.990-997
• /
• 2005

The objective of this paper is to present the element connectivity parameterization (ECP) fur three dimensional problems. In the ECP method, a continuum structure is viewed as discretized finite elements connected by zero-length elastic links whose stiffness values control the degree of inter-element connectivity. The ECP method can effectively avoid the formation of the low-density unstable elements. These elements appear when the standard element density method is used for geometrical nonlinear problems. In this paper, this ECP method developed fur two-dimensional problems is expanded to the design of three-dimensional geometrical nonlinear structures. Among others, the automatic procedure converting standard finite element models to the models suitable for the ECP approach is developed and applied for optimization problems defined on general three-dimensional design domains.

• Journal of Korea Multimedia Society
• /
• v.7 no.1
• /
• pp.113-125
• /
• 2004

Active networks aim to provide a software framework that enables active network applications to customize the processing their communications. Active security component architecture focuses on the support of reuse system by active security component. The architecture is standard layer to acquire, understand, and assemble component, and it has to support a guideline for component identification, search and customization. In this paper we present the active security architecture as a standard model of discrete active network solution, and we propose the method for component classification and specification.