• 한국산림과학회지
• /
• 제86권2호
• /
• pp.200-207
• /
• 1997

임분의 수종구성에 따른 수문의 변화와 강우차단 정도를 비교하기 위하여 경기도 광주군 서울대학교 농업생명과학대학 부속 중부연습림에서 1995년 5월부터 11윌 사이에 잣나무림, 낙엽송림 및 참나무림을 대상으로 수간류 수관통과류 및 강우차단량 등을 조사하였다. 이 기간 동안 총 강우량은 1,821mm이였으며 이 중 잣나무림에서 15.7%, 낙엽송림에서는 19.4% 그리고 참나무림에서 21.8%의 강우 차단비율을 보였다. 강우는 세임분 모두 수관통과류 형태가 가장 큰 비중을 차지하였으나 특히 잣나무림이 높게 나타났다. 수간류의 경우에는 잣나무림이나 낙엽송림 모두 1.1%의 낮은 비율을 보였지만 참나무림에서는 5%의 비율을 차지하였다. 수관통과류량 및 수간류하량은 모두 강우량과 높은 상관관계를 나타냈다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.865-870
• /
• 2003

A motion controller has been used variously in industry such as semiconductor manufacture equipment, industrial robot, assembly/conveyor line applications and CNC equipment. There are several types of controller in motion control. One of these is a PC-based motion controller such as PCI or ISA, and another is stand-alone motion controller. The PC bus-based motion controller is popular because of improving bus architectures and GUI (Graphic User Interface) that offer convenience of use to user. There are some problems in this. The PC bus-based solution allows for only one of the form factors, so it has a poor flexibility. The overall system package size is bigger than other motion control system. And also, additional axes of control require additional slot, however the number of slots is limited. Furthermore, unwieldy and many wirings come to connect plants or I/O. The stand-alone motion controller has also this limit of axes of control and wiring problems. To resolve these problems, controller must have capability of operating as stand-alone devices that resides outside the computer and it needs network capability to communicate to each motion device. In this paper, a network-based stand-alone motion system is proposed. This system integrates PC and motion controller into one stand-alone motion system, and uses CAN (Controller Area Network) as network protocol. Single board computer that is type of 3.5" FDD form factor is used to reduce the system size and cost. It works with Windows XP Embedded as operating system. This motion system operates by itself or serves as master motion controller that communicates to slave motion controller. The Slave motion controllers can easily connect to master motion system through CAN-network.

• IEIE Transactions on Smart Processing and Computing
• /
• 제5권1호
• /
• pp.35-42
• /
• 2016

Developments in power electronics have enabled the widespread application of Pulse Width Modulation (PWM) inverters, notably for connecting renewable systems to the grid. This study demonstrates that a high-quality power can be achieved using a stand-alone inverter, whereby the comparison between the power quality of the stand-alone inverter with battery storage (off-grid) and the power quality of the utility network is presented. Multi-loop control techniques for a single phase stand-alone inverter are used. A capacitor current control is used to give active damping and enhance the transient and steady state inverter performance. A capacitor current control is cheaper than the inductor current control, where a small current sensing resistor is used. The output voltage control is used to improve the system performance and also control the output voltage. The inner control loop uses a proportional gain current controller and the outer loop is implemented using internal model control proportional-integral-derivative to ensure stability. The optimal controls are achieved by using the Sisotool tool in MATLAB/Simulink. The outcome of the control scheme of the numerical model of the stand-alone inverter has a smooth and good dynamic performance, but also a strong robustness to load variations. The numerical model of the stand-alone inverter and its power quality are presented, and the power quality is shown to meet the IEEE 519-2014. Furthermore, the power quality of the off-grid system is measured experimentally and compared with the grid power, showing power quality of off-grid system to be better than that of the utility network.

• 한국산림과학회지
• /
• 제97권2호
• /
• pp.156-164
• /
• 2008

Recognizing the importance of the multi-purpose management of natural deciduous forest, this study was carried out to implement the partial cutting for stand regulation to examine agroforestry practice as well as other concurrent forest resource production, and to investigate the changes in stand characteristics and understory vegetation in a silvopasture practiced natural deciduous stand in the Research Forest of Kangwon National University, Korea. Three different partial cutting intensities (68.1%, 48.6%, and control) were performed in the unmanaged natural deciduous stand in order to improve the growing condition, especially light condition, for introducing some commercial herbaceous plants on the forest floor to establish agroforestry and/or silvopastoral system. Dominated by Quercus varibilis Blume (50.5%) and Quercus dentata Thum. ex Murray (42.6%), eight tree species were composed of the study forest, including poles of Pinus desiflora Siebold & Zucc and sapling of Pinus Koraiensis Siebold & Zucc. The total of 87 (13 tree species, 12 shrub species, 58 herbaceous species, and 4 woody climbers) vascular plant species were observed in study site after partial cutting treatments, while that of before partial cutting was 53 species (14 tree species, 8 shrubs species, 30 herbaceous species, and 1 woody climbers). The proportion of life form spectra in plot B was Mi (28.4%)-Na (23.0%)-Ge (17.5%)-Ch (10.8%)-He (9.5%)-MM (6.7%)-Th (4.1%). No statistically significant differences were observed in changes of life form spectra from before to after partial cutting treatment and among partial cutting gradients in this study. Partial cutting and scratching for forage sowing made plants invade easily on the forest floor, and light partial cutting (LPC) plot (500 stems/ha) had much higher number of undersory species than those of heavy partial cutting (HPC) plot (310 stems/ha) and control plot (1,270 stems/ha).

• 건축역사연구
• /
• 제15권5호
• /
• pp.41-56
• /
• 2006

Signal fire was a communication system which deliver urgent news by smoke and light. It informed the condition of the border to the central government and the military base rapidly. This research was to analyze the border signal-fire which is the main facility of military protective duty for safety of sea side in chosun dynasty. The results of this research were described separately as follows. 1. The border signal-fire has three types of facility layout, The majority was one-site, near two-site, separate type. The majority was near two-site type. 2. Plan configuration of signal-fire stand which is separated with circle, oval, round-rectangular and rectangular type roughly was constructed with circle type generally. Four types of signal-fire stand was observed in southern and western sea side impartially. However, in eastern side, circle type of signal-fire stand was mainly found. Therefore, regional characteristics could be considered partially. 3. The height of signal-fire stand was about 8~10m. The diameter of combustion chamber on the signal-fire stand was 2~3m in circle type, and the dimension of rectangular type was about $1.9{\times}1.9{\sim}3.2{\times}3.0m$. 4. Building base that protect ground moisture and infilteration of rainfall was found in 10 border singal-fire, the height of it was about 0.3m~2.5m.

• Journal of the Korean Data and Information Science Society
• /
• 제28권1호
• /
• pp.29-37
• /
• 2017

산림경영 계획을 위한 필요한 산림재적을 보다 효율적으로 추정하기 위해서 다양한 연구가 요구되어져 왔는데, 이러한 산림구조에 관한 연구는 주로 현장조사와 위성영상을 이용하여 이루어진다. 현장조사를 통한 연구는 비교적 정확하나 시간과 비용이 많이 들 뿐 아니라 접근의 용이성이 떨어지는 지역이 있기 때문에, 넓은 지역의 조사가 어렵다는 단점이 있다. 최근에는 항공기에서 발사된 레이저 펄스가 반사되어 돌아오는 시간을 측정하여 대상의 3차원 좌표를 얻는 LiDAR (Light Detection and Ranging) 기술을 활용하여 획득한 정밀한 수치형자료를 이용한 산림의 구조에 관한 연구가 이루어지고 있다. 일반적으로 산림재적을 추정하기 위해서 LiDAR자료를 이용한 수고자료와 산림 재적에 대한 회귀모형의 중요성이 점차 높아지는데, 국내의 경우 수목의 종류와 그 분포가 다르기 때문에 회귀모형만으로 재적을 추정하는 데 한계가 있다. 따라서 본 논문에서는 산림의 수고와 흉고직경을 측정하여 재적값을 추정하고 산림의 공간효과를 고려한 계층적 베이지안 분석을 통해 관측되지 않은 전체 산림재적에 대한 추정을 하고자 한다.

• 한국전문물리치료학회지
• /
• 제10권2호
• /
• pp.99-110
• /
• 2003

The purpose of this study was to analyze the effects of three different pelvic tilts on sit-to-stand ativities and to suggest a new therapeutic approach for movement reeducation in patients who have difficulty with sit-to-stand activities. The three different pelvic tilts were: (1) comfortable pelvic tilt sit-to-stand (CPT STS), (2) posterior pelvic tilt sit-to-stand (PPT STS) and (3) anterior pelvic tilt sit-to-stand (APT STS). To analyze the kinematic component of STS, a motion analysis system (Zebris) was applied to the ankle, knee, hip joint, and thigh-off area. Also, to determine the onset time of muscle contraction, surface electrodes were placed to the rectus femoris muscle (RF), the vastus lateralis muscle (VL), the biceps femoris muscle (BF), the tibialis anterior muscle (TA), the gastrocnemius muscle (GCM), and the soleus muscle (SOL). One-way repeated ANOVA was used for the statistical analysis. First, significant differences were found in kinematic variables for the hip, knee, ankle joint, and thigh-off among the three activities. Second, there was significant difference in muscle activation pattern in TA. VL. and BF among three activities. In conclusion, the findings of this study suggest the following evaluative and therapeutic approach for STS activity: (1) Changes in knee and ankle joints should be prioritized and recruitment order differences in VL and RF can be generated to accomplish abnormal STS activity. (2) APT STS can be introduced for movement efficiency and functional advantage when abnormal STS is treated.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2007년도 Proceedings of ISRS 2007
• /
• pp.449-451
• /
• 2007

In the commercially managed timber lands, the information such as height, age, stand density, canopy closure and leaf area index need to be collected periodically. Stand volume is the most fundamental information in the valuation of timber, however, stand age information is the primary element of forest inventory and these two are highly correlated. Conventional method of collecting stand age information by field surveys such as ring count method is accurate; however, it is expensive, labor-intensive and time consuming. In the present study it was aimed to collect stand age information using modem techniques in a commercially managed timberland situated in Tennessee, USA. The Landsat Thematic Mapper (TM), Enhanced Thematic Mapper (ETM+) of three different periods, Shuttle Radar Topography Mission (SRTM), National elevation dataset (NED) and field inventory data were used. Normalized difference vegetation index (NDVI) and Tasselled Cap (TC) transformation techniques were applied on the TM and ETM+ data. The regression analysis was carried out to identify the correlation between stand age and NDVI, TC. In the present study about 2,469 datasets were analyzed. The $R^{2}$ value for stand age estimation was 0.713. The NDVI, TC2 and TC3 were found to produce accurate timber age information.

• 한국통신학회논문지
• /
• 제30권2A호
• /
• pp.90-97
• /
• 2005

일반적으로 DAB 시스템은 크게 stand-alone 방식과 PC/PDA 기반 방식으로 구분할 수 있다. PC/PDA 기반 방식은 stand-alone 방식에 비하여 휴대성이 떨어지나 연결된 PC/PDA의 메모리와 오디오/비디오 디코더 등 다양한 리소스를 이용할 수 있는 장점이 있다. 본 논문에서 구현한 DAB 수신기는 USB 인터페이스를 이용한 PC 기반의 수신기 시스템으로 USB 인터페이스 브리지는 FPGA와 EZ-USB 개발 키트를 이용하여 설계하였으며 실험을 위하여 기존의 stand-alone 방식의 DRK-026 DAB 수신기를 이용하여 PC 기반의 수신기를 구현하였다. USB 인터페이스 브리지는 시리얼 데이터를 USB 패킷 형태로 변환시켜주며 모든 신호는 하드웨어적으로 제어한다. 구현한 PC 기반 DAB 수신기의 동작 여부는 DAB 수신기로부터 오디오 데이터를 수신하여 USB 인터페이스를 통하여 PC에 전송한 후 디코딩 기능을 수행하는 것으로 확인하였다.

• 품질경영학회지
• /
• 제10권2호
• /
• pp.2-9
• /
• 1982

In principle the methods of increasing the reliability of complex system can be classified into the following four basic methods: (1) using the stand-by redundancy; (2) decreasing the failure rate of the system; (3) decreasing the time of continuous operation; (4) decreasing the mean repair time. Among the above four methods, it is generally known that the method of stand-by redundancy is the most effective general, to increase the reliability of systems. Therefor this paper aims to compare the gain in reliability which is achieved by applying stand-by redundancy with other methods, and to show the characteristics of each method From the comparison of the methods of increasing reliability, the following important facts are found: When the method of stand-by redundancy is used to increase the reliability of complex systems intended for long-term operation, a hight multiplicity of stand-by redundancy is required. Thus an increase of the reliability of complex system by applying stand-by redandancy is realized at the expense of characteristics such as weight, size, cost, increased complexity of operation conditions. And this property restricts its use in systems which are critical with respect to weight, size, cost or operation conditions. The method of stand-by redundancy is the most effective when this method is used to increase the reliability of complex systems intended for short-term operation, and the method of decreasing failure rate is the most effective when it is used to increase the reliability of systems intended for long-term use. The methods of increasing reliability discussed in this paper make it possible to make highly reliable systems. But it is not possible to make a highly reliable system using a single method of increasing reliability, even if it is the most effective one. Therefore it is recommended to use all or a majority of the above four methods by choosing it in accordance with the properties of the system under construction.