• Journal of the Korean Society of Tobacco Science
• /
• v.14 no.2
• /
• pp.144-150
• /
• 1992

This study was carried out to investigate the effect of yield and quality on the harvesting time and methods of stalk cutting in Burley Tobacco.3 harvesting methods and 4 harvesting times of stalk cutting were compared to priming. The yield and quality were high when cut the stalk after second priming in stalk curing. It was also desirable that cut the stalk after second priming in stalk curing. It was also desirable that cut the stalk on 30 days after topping for standard fertilization(N-P2O5-K2O= 17.5-17.5-35.0kg/10a) plot, and 30-35 days after topping for 30% increased fertilization.

• Korean Journal of Plant Resources
• /
• v.18 no.3
• /
• pp.490-496
• /
• 2005

This study was conducted to clarify the effects of chemicals and physical treatment on the split of flower stalk and the vase life of Lycoris squamigera and Lycoris radiata. There was no split of flower stalk for the Lycoris squamigera and the Lycoris radiata after the harvest of flowers and the immersion in 4 mM STA solution for 30 minutes. It was effective for the vase life of Lycoris squamigera that cut flower was pre-treated in 4 mM STS solution for 30 minutes and immersed in $5\~10\%$ sucrose + 150 ppm 8-HQS +4 ppm Rox preservative solution. The optimum periods of hot water treatments for the prevention of flower stalk split and the elongation of vase life for the cut flowers were 15 to 25 seconds for the Lycoris squamigera and 5 to 10 seconds for Lycoris radiata. Burning the cut parts of flower stalk for 10 to 30 seconds was effective for the prevention of flower stalk split and the elongation of vase life for the Lycoris squamigera, and 10 to 15 seconds for the Lycoris radiata. The vase lifes of Lycoris squamigera and Lycoris radiata were elongated when flower stalk was cut by an incline of 45 degrees compared with the horizontal cut. And Banding the flower stalks of cut flowers was effective for the prevention of flower stalk split and the elongation of vase life for the Lycoris squamigera and the Lycoris radiata.

• Journal of Practical Agriculture & Fisheries Research
• /
• v.8 no.1
• /
• pp.21-29
• /
• 2006

When apples are picked or selected by grader, the rate of wound occurrence on the skin by apple stalk is remarkably high if the apple was bigger than 3 size during the harvest time. Except this case, the other sizes showed very little similarity. The crop of apple per 1 minute was 2.9kg without cutting fruit stalk, whereas only 1.1kg of the apples were obtained due to cutting the fruit stalk. Thereby, the harvesting without cutting fruit stalk is highly effective in terms of productivity rather than cutting the fruit stalk. As far as the wound occurrence rate on apple skin by apple stalk of distance between grader's dish and accumulated board is concerned, the grader which has no distance showed quite low rate of wound occurrence compared with those grader with 3cm or 8cm distance. When the apple was being stored, there was no difference in firmness between the cut stalk apple and the uncut stalked apple, however there was slightly more weight loss in the cut stalk apple than uncut stalk apple.

• Journal of the Korean Society of Tobacco Science
• /
• v.24 no.1
• /
• pp.32-37
• /
• 2002

This study was carried out to investigate the effects of suckers on chemical components with vertical and horizontal hanging method during stalk-cut curing in burley tobacco. The elongation and dry weights of suckers were increased until 14 days in vertical hanging method, and until 7days in horizontal hanging method after the beginning of curing. The contents of nicotine, protein-N and $NH_4$-N were decreased at treatment of more suckers during the curing. However, there was no significant difference by the hanging method. Solanone, damascenone, megastigmatrienone and 4-methyl phenol were increased gradually during curing. Those were increased with treatment of fewer suckers compared to treatment of more suckers. There was no significant difference by the hanging method.

• FLOWER RESEARCH JOURNAL
• /
• v.16 no.4
• /
• pp.275-283
• /
• 2008

Eighteen accessions of Curcuma germplasm were evaluated for use as cut flowers or potted plants. Curcuma species or cultivars that have colorful showy bracts and long inflorescence longevity can be produced as cut flowers or potted plants. For cut flower uses, following cultivars were recommended: C. alismatifolia 'Chiangmai Pink', 'Tropic Snow', 'Chiangmai Dark Pink', 'Lady Di', and 'Siam Violet Lily' with long flower stalk length (40~55 cm) and long vase life. For potted plant production, C. alismatifolia 'Cambodian Scarlet', 'Cambodian Red', C. sparganifolia 'Siam ruby', and C. thorelii 'Chiangmai Snow' producing short flower stalk length (about 10~20 cm) were evaluated.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.1
• /
• pp.29-32
• /
• 1997

This study was carried out to develop a new stalk curing of the horizontal hanging method that would reduce the harvesting and curing labor, and improve its quality of cured leaf than the conventional stalk curing method in burley tobacco. The horizontal hanging stalk-curing method designed from 1988 was compared with the conventional method. The horizontal method shortened the curing Period for 7 days and reduced to 0.3%, while it occurred 9.4% in the vertical method. In the horizontal method, the quality of cured leaf improved 9%, but the contents of chemical components and physical properties were similar to those of vertical method. The labor of stalk-cut and loading in curing facility reduced 28% by the horizontal method. In harvesting and curing process, the horizontal method resulted 12% of labor saving as compared with the vertical method. Key words : horizontal hanging stalk-curing method, vertical method, stalk-curing.

• Journal of the Korean Society of Tobacco Science
• /
• v.25 no.1
• /
• pp.27-33
• /
• 2003

This study was conducted to determine the changes of nitrogen compounds in lamina and midrib during the curing process with the different curing methods, such as priming and stalk-cut curing. After KB 108 burley tobacco was cultivated by the different fetilization levels such as standard and 20% higher, only the tips and leaf were harvested. Though the contents of total alkaloid and total nitrogen were similar in lamina, midrib showed a very low contents of those components by the different curing method and fertilization levels. The content of nitrate-nitrogen in lamina increased during a middle of curing process, and then these compound was decreased during an end of curing process by stalk-cut curing method. Nitrate-nitrogen contents in the lamina by the priming curing showed a high level caused by rapid drying process during an end of curing process. That component in midrib was 5-6 times higher than that of lamina. The contents of ammonia-nitrogen in the lamina and midrib were increased during a curing process. Though those amount in tips showed a similar by a different fetilization and curing method, midrib of stalk-cut curing showed a slow increasing during a curing process.

• Journal of the Korean Society of Tobacco Science
• /
• v.20 no.2
• /
• pp.231-237
• /
• 1998

This study was carried out to investigate the effects of curing methods on the concentration of ammonia during curing in burley tobacco leaves. The air-cured tobacco(KB108; Nicotiana tabacum L.) was grown at Chonju Tobacco Experiment Station in 1998 and the tenth leaves from the top on the stalk were harvested. Half of the harvested leaves were cured in normal air curing facility and the other leaves were cured in excessive curing facility. Stalk cut tobaccos were cured in horizontal curing facility. The leaves were sampled every five days from harvesting time to the end of curing(25 days). Ammonia concentration of leaves increased during curing period with a remarkable increase at yellowing stage. The concentration of ammonia was high in the primed cured leaves, while that of the excessive cured leaves was low. It is considered that the lower increase of ammonia in stalk cured leaves may be caused by the translocation from the leaves to the stalk during curing, while that of excessive cured leaves may be caused by the poor decomposition of protein and amino acid during curing by excessive moisture loss and high temperature condition.

• Journal of Biosystems Engineering
• /
• v.20 no.1
• /
• pp.13-21
• /
• 1995

This study was conducted to investigate the cutting mechanism of reciprocating knife of combine harvester. The cutting operation of reciprocating knife with the arrangement of the low-cutting and the double-cutting was demonstrated through cutting pattern diagram which was drawn by computer graphics. Various kinds and dimensions of reciprocating knives were analyzed using the developed program. The results are summarized as follows (1) The low-cutting type reciprocating knife was represented similar cutting characteristics to the standard type, but the maximum stalk-deflection was decreased as 1/2 level of the standard type. And the first ledger plate should be designed shorter than the second ledger plate. (2) The bunching area and the maximum stalk-deflection for the double cutting knife almost were not changed since cutting velocity ratio of 0.6, but the secondary cut were occurred at ratio of 0.8 and increased rapidly over these ratio. (3) The double cutting knife was recommended for the high speed combine, because its bunching area and the maximum stalk-deflection were decreased as 1/2 level of the standard type. (4) In order to maintain the proper cutting mechanism characterized by the bunching area, the maximum stalk-deflection and the secondary cutting length etc., the adequate cutting velocity at forward speed of 0.5㎧ to 1.2㎧ was from 0.3㎧ to 0.96㎧ for the double cutting knives.

• Plant Resources
• /
• v.3 no.1
• /
• pp.59-65
• /
• 2000

The opening process of cut calla flower was faster at 30 t than at lower temperatures as it could be expected from its tropical origin. Gibberellin enhanced the flower opening, however, it also speeded up senescent. Silver thiosulfate was effective in prolonging the vase life of the cut calla flower. Silver thiosulfate reduced ethylene generation by the flower and inhibited microbial growth in the flower stalk. Reduction in ethylene generation and inhibition of microbial growth is thought to be responsible for the extension of the vase life of cut calla flowers by silver thiosulfate.