• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.7
• /
• pp.61-68
• /
• 1998

The form accuracy of parts has become an important parameter. Therefore, dimensional tolerance and geometric tolerance are used in the design stage to satisfy required quality and functions of parts. But the informations on the machining conditions, which can satisfy the assigned geometric tolerance in design, are insufficient. The objectives of this research are to study the effects of the grinding parameters such as traverse speed, work speed, depth of cut, and dwell time on the after-ground workpiece shape, and to find out the major parameters among them. The results are as follows, The effects of work speed and depth of cut on workpiece shape are negligible compared with the effect of traverse speed. There is an optimal dwell time depending on the traverse speed. The optimal dwell time is decreasing as the traverse speed is increased.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.6
• /
• pp.2647-2650
• /
• 2014

Background: Colorectal cancers(CRC) are the third most common cancer in the western world, with surgery preferred for management of non-metastatic disease and post surgical treatment usually arranged according to the TNM staging system. However, there is still prognostic variation between patients who have the same stage. It is increasingly recognized that variations within disease course and clinical outcome in colorectal cancer patients are influenced by not only oncological characteristics of the tumor itself but also host response factors. Recent studies have shown correlation between the inflammatory response and clinical outcomes in various cancers. The neutrophil/lymphocyte ratio (NLR) has been described as a marker for immune response to various stimuli including cancer. Material-Methods: Two hundred eighty-one CRC patients were included in our retrospective analysis, separated into two groups according to a cut-off value for the NLR. Patient data including age, gender, vertical penetration, anatomic location, and differentiation of the tumor, TNM stage, survival rate, and disease-free survival were analyzed for correlations with the NLR. Results: Using ROC curve analysis, we determined a cut-off value of 2.2 for NLR to be best to discriminate between patient survival in the whole group. In univariate analysis, high pretreatment NLR (p=0.001, 95%CI 1.483-4.846), pathologic nodal stage (p<0.001, 95%CI 1.082-3.289) and advanced pathologic TNM stage (p<0.001, 95%CI 1.462-4.213) were predictive of shorter survival. In multivariate analysis, advanced pathologic TNM stage (p=0.001, 95%CI 1.303-26.542) and high pretreatment NLR (p=0.005, 95%CI 1.713-6.378) remained independently associated with poor survival. Conclusions: High pre-treatment NLR is a significant independent predictor of shorter survival in patients with colorectal cancer. This parameter is a simple, easily accessible laboratory value for identifying patients with poorer prognosis.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.2 no.4
• /
• pp.64-73
• /
• 1999

This study was conducted to find out the effects of hydroseeding material and seed mixture on the revegetation of rock cut-slopes by PEC4 (Polymer-Ecology-Control) Hydroseeding Measures. PEC4 hydroseeding material was applied to four cut-slopes using hydroseeding measures from April to August, 1999, and the field survey was carried out by monthly. PEC4 material consisted of bark compost and organic soil amendments. This material has high content of organic matter and high level of water holding capacity. PEC4 hydroseeding material shows low level of soil hardness, so it gives to good condition for seed germinating and plant growing in early stage. PEC4 material attached at rock cut-slopes by two types of adhesive agent was not eroded by rainfall. The plant coverage and number of plant species were affected by mixing ratio of seeds and seeding timing. From the viewpoint of plant establishment, the optimal hydroseeding timing of mixed seeds for plant growth seems to be in May. Most of the plant seeds were germinated well and they covered rock cut-slopes so quickly and effectively. Plant importance value of Silene armeria and Platycodon grandiflorum. were higher than any other seeded-native species in the competition between native species and exotic species, so they have enough possibility to be used for slope revegetation works. Thus it leads to conclusion that the revegetation method used in this experiment was a very effective method for plant establishment on rock cut-slopes.

• Tunnel and Underground Space
• /
• v.21 no.1
• /
• pp.20-32
• /
• 2011

Failure aspects of cut-slope, which induce the sequential collapses during the excavation stage, have been analyzed. Slope rock structures are investigated by examining the orientations and positions of discontinuity planes calculated based on the BIPS image inside the boreholes. Drilled core log has been also used to identify the structural defects. Clay minerals of swelling potentials are detected through XRD analysis. Numerical analysis for slope stability has been performed by utilizing the joint shear strength acquired from the direct joint shear test. Cut-slope collapse characteristics have been studied by investigating the posture of failure-prawn joint planes and the stability of tetrahedral blocks of different sizes. Cross-section analysis has been also performed to analyze the cut-slope behavior and to estimate the amount of reinforcement required to secure the stability of cut-slope. Behavior of reinforced cut-slope is also investigated by analyzing the slope monitoring data.

• Journal of Animal Science and Technology
• /
• v.48 no.3
• /
• pp.443-452
• /
• 2006

The four rice(Oryza sativa L.) lines, previously demonstrated to have vigorous herbage production at the vegetative growth stage, were investigated for their growth traits, dry matter yield and feed value using the twice-cutting system that 1st-cut is harvested at panicle formation stage and 2nd-cut at the yellow ripen stage. The twice-cutting system is regarded as an effective method in the production of forage rice by escaping lodging and insect damages caused by the overgrowth and typhoon around the heading stage.The feed value of the twice-cut rice plant of there lines were compared with the control of normal, cutting at the yellow ripen stage. The relative feed value(RFV), the total digestible nutrient(TDN) and the crude protein(CP) content of the twice-cut straw were higher the control in every lines. However, the dry matter yield (DMY), represented by the summed forage production of 1st and 2nd cut-rice plant, were lower the control, and the DMY of straws were increase but grains were decrease for twice-cutting system. In addition, TDN yield showed the similar tendency with DMY.Recently, as one of the breeding aims the researches for improving the digestibility of rice straw have been required. In this regard, twice-cutting system is recognized with the fact that it has the effect which raises the digestibility of the straw. Especially, the 2nd cut of IR73111-B-R-15-3-1 line was similar to the control at the TDN yield of straw, and would be used as a breeding material for product the roughage of good quality.

• Horticultural Science & Technology
• /
• v.16 no.3
• /
• pp.366-369
• /
• 1998

To lesson economical loss induced by fumigation in importing country when cut roses are exported, effects of several fumigation temperature, treatments of cut stems (dry or wet), methyl bromide (MB) concentrations, and fumigation periods on the quality of cut roses were investigated. According to results, the most important factor affecting the quality of cut rose was found to be fumigation temperature. When fumigated at $5^{\circ}C$, cut roses showed no chemical damages, e.g., tip burn or bent neck, and maintained their quality for the same duration as that of control, regardless of MB concentrations or treatments of cut stems. However, phytotoxicity by MB increased and vase life of cut rose was shortened as fumigation temperature increased. Timing of fumigation also appeared to be an important factor affecting the quality of cut roses of which phytotoxicity by MB was not observed and thier vase life was not shortened, even if MB was treated up to $40g{\cdot}m^{-3}$, when cut roses were fumigated at $5^{\circ}C$ on the day of harvesting. On the other hand, the degree of damage of cut flowers by fumigation methods or MB concentraions was not consistent with changes in fumigation temperature.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.7 no.6
• /
• pp.84-93
• /
• 2004

This study was carried out to select proper species for early stage replantation in granite forest roads cut-slope. From two to sixteen year elapsed forest roads in four regional areas of Gangwon-do, sample plots were selected, and their vegetations and environmental factors were investigated. Soil organic matter, total nitrogen, soil moisture content, and bulk density in the decomposed granite soils were below 1.32%, 0.08%, 10.0%, and above 1.24g/$cm^3$, respectively. The result indicated that the soil was not good for plant growth. The environmental factors affecting distribution of species in the granite forest roads were the elapsed year, cut-slope, elevation, and cut-slope aspect. Species with high frequency in the granite forest road cut-slope ordered Lespedeza bicolor, Rubus crataegifolius, Pinus densiflora, Lysimachia clethroides, Amorpha fruticosa, Dactylis glomerata, Lespedeza cyrtobotrya, Festuca arundinacea, Spodiopogon sibiricus, Artemisia stolonifera, and Weigela subsessilis. Herbs seeded in earth stage such as Dactylis glomerata, Lolium perenne, and Festuca arundinacea had changed into perennial herbs such as Carex lanceolata, Poa sphondylodes, Patrinia villosa, Artemisia princeps var. orientalis, Spodiopogon sibiricus, Melica onoei, Artemisia keiskeana, Artemisia stolonifera, Astilbe chinensis var. davidii, Spodiopogon sibiricus, and those had changed into shrubs such as Rubus crataegifolius and Weigela subsessilis, and those had changed into trees such as Salix hulteni, Salix koreensis, and Fraxinus rhyncholhylla according to elapsed year of forest roads. Legumes such as Lespedeza sp., Pueraria thunbergiana, Amorpha fruticosa, etc., herbs such as Artemisia keiskeana, Artemisia princeps var. orientalis, Artemisia stolonifera, Astilbe chinensis var. davidii, Spodiopogon sibiricus, Miscanthus sinensis, etc., and woody plants such as Pinus densiflora, Rubus crataegifolius, Weigela subsessilis, Zanthoxylum schinifolium, Rhododendron mucronulatum, etc., with foreign herbs were considered as proper species for replantation in granite forest road cut-slope.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.7
• /
• pp.185-192
• /
• 2003

This paper proposes an efficient mechanism design system of multi-stage gear drives including not only parallel shaft gears but also non-parallel gears such as bevel and worm gear drives. The system automatically generates three dimensional structures of specification-adjusted mechanisms, and shows the sorted list of the mechanisms according to the evaluation result by using a fuzzy expert system. The list can be used as reliable candidates of the spatial mechanism structures of multi-stage gear drives. Thus, it is expected that the system can increase the efficiency of design and cut off the expenses of preliminary design considerably.

• Journal of Welding and Joining
• /
• v.33 no.3
• /
• pp.62-67
• /
• 2015

A very large shell-structure built in shipyards like ship hulls or offshore structures are joined by welding through full process. As the welding contains a high thermal cycle at a local area, the welded structures should be distorted unavoidably. Because a distorted ship block should be revised to the designed value before the next stage, the ability to predict and to control the weld distortion is an accuracy level of the yard itself. Despite the ship block size, several present thermal distortion methodologies can deal those sizes, but it is a different story to deal full ship size model. Even a fully constructed ship hull not remaining any welding can have an accuracy issue like outfitting installation problems. Any present thermal distortion methodology cannot accept this size for its recommended element size and the number. The ordinary welding breadth at erection stage is about 20~40 mm. It can hardly be a good choice to make finite element model of these sizes considering human effort and computational environment. The finite element model for structure analysis of a ship hull is prepared at front-end engineering design stage which is the first process of the project. The element size of the model is as fine as the longitudinal space, and it is not proper to obtain a weld distortion at the erection stage. In this study, a methodology is suggested that a weldment can be shrunk at original place instead of using structural finite element model. We cut the original shell elements at erection weld-line and put truss elements between the edges of cut elements for weld shrinkage. Additional truss elements are used to facsimile transverse weld shrinkage which cannot be from the weld-line truss element shrink. They attach to weld-line truss element like twigs from barks. The capacity of developed elements is verified through an accuracy check of erection process of a container vessel at the apt. hull. It can be a useful tool for verifying a centering accuracy after renew and for block-separating planning considering accuracy.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.37 no.2
• /
• pp.141-148
• /
• 1992

Field experiment was carried out to investigate the effect of plant growth regulator (PGR); IAA, GA, Kinetin to regrowth of sorghum and pearlmillet according to variety and plant growth stage. Kinetin application after cut increased tiller number and decreased dry weight of regrowth, but its application on sorghum stubble in water stress increased tiller number and leaf elongation rate, consequently increased regrowth dry weight. GA application reduced tiller production in both species, but tiller formation in pearlmillet was decreased more than in sorghum by promoting leaf elongation of old tiller. Nonstructural carbohydrate (NSC) of stubble during regrowth was consumed less at anthesis than at stem elongation stage because of senescence of tiller primordia. GA treatment reduced NSC content more than other PGR in both plant species, by consuming reserve NSC and stimulating rapid elongation of old tiller after cut. Dry matter increase during regrowth had high correlation with tiller number and tiller elongation a week after cut, while it did not have any correlation with NSC at cutting stage or with consumption of NSC during regrowth. Therefore, regrowth in sorghum and pearmillet must depend upon activity of tiller primordia more than upon amount of reserved NSC.