Proceedings of the Korean Geotechical Society Conference
/
2009.09a
/
pp.1522-1529
/
2009
When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.
Kim, Dong-Hyun;Lee, Sang-Pil;Lee, Hun-Yeon;Lee, Tae-Ro;Jeon, Seok-Won
Explosives and Blasting
/
v.25
no.1
/
pp.31-43
/
2007
In most tunnel constructions in South Korea, blasting has been widely used as an excavation method. In tunnel blasting, the center-cut to induce first free surface is very important for enhancing excavation efficiency and reducing vibration caused by exploding. This paper introduces new center-cut method named SAV-cut (Stage Advance V-cut) developed on the concept of V-cut. Significant features of SAV-cut are the center hole and stepwise ignition. Many field tests and numerical analysis were carried out to analyze the mechanical behavior and blasting vibration. From the results, the newly developed SAV-cut was proved as an effective center-cut method for both increasing blasting efficiency and decreasing blasting vibration.
This study was carried out to investigate the changes of dehydration process and quality of cured leaves with crushed midribs and cut of the yellowed leaves during drying stage of flue-cured tobacco. The crushed midribs of yellowed leaf dried out before raising the highest temperature of midrib drying stage and reduced the curing time by about 20 hours. However, the cut of yellowed leaf was not affected the curing time and dehydration process during drying stage of flue-curing due to a problem with the cut leaves packing excessively in the curing container. The cured weight yield was increased with crushed midrib and cut leaves, and nicotine and sugar contents of cured leaves and quality in terms of dollars per kilogram were decreased with crushed midrib and cut leaves.
Journal of The Korean Society of Grassland and Forage Science
/
v.11
no.2
/
pp.121-128
/
1991
Forage productivity of two sorghum hybrids, Pioneer(P) 931 and P 956 and a sorghum-sudangrass hybrid, P 988, was studied. The 1st-cut of sorghun hybrids was made for silage 6 times from heading stage at a week-interval and regrowth (2nd-cut) was harvested on Oct. 13 although plants were not reached the same growth stage of 1st-cut. However, the 1st- and 2nd-cut of sorghum-sudangrass were made for green fodder 6 times from 4 weeks before heading stage at a week-interval. 1. Percent dry matter(DM) of 1st-cut of sorghum and 1st- and 2nd-cut of sorghum-sudangrass increased as growth stage advanced. Percent DM of 2nd-cut of sorghum decreased as the 1st-cut date delayed due to insufficient growing period on Oct. 13. 2. In the 1st-cut of sorghum the proportion of leaf blade (LB) or culm+leaf sheath (LS) to total DM decreased, but that of panicle increased as growth stage advanced. The panicle proportion of P 956 increased and culm+LS decreased more rapidly compared with those of P 931. IIowever, in sorghum-sudangrass hybrid the proportion of LB decreased and culmf LS increased as growth stage advanced through heading stage. 3. In the 1st-cut of sorghum hybrids crude(C) protein and C. fiber decreased, but nitrogen free extract (NFE) increased as growth stage advanced although C. fat and C. ash were similar among the growth stages. In the 2nd-cut of sorghum C. protein and C. ash increased, but NFE decreased as harvesting date delayed due to plants were younger although C. fat and C. fiber were similar among the harvesting dates. In the sorghum-sudangrass C. protein of 1st-cut decreased, but C. fiber of 1st-cut and NFE of the 1st-and 2nd-cut increased as growth stage advanced. 4. DM yield of 1st-cut of sorghum increased from heading stage to 3 weeks after heading and then levelled off, but total DM including regrowth was similar among the harvesting time. In the sorghum-sudangrass hybrid DM yield of 1st-cut and total DM yield including 2nd-and 3rd-cut increased as the harvestingtime delayed.
This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Ilweol' bred in Korea by foliar application of daminozide, suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stage (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Cut flower length and peduncle length showed the greatest repression of elongation through daminozide treatments at stage III and stage II, respectively. Daminozide also gradually reduced values of those in a concentration-dependant manner. Flower diameter increased compared to control as daminozide was sprayed at later stage but decreased in daminozide concentration-dependant manner. Angle of flower cluster on apical part of whole plant showed the best results when sprayed with $2,000mg{\cdot}L^{-1}$ at stage III. Among all combinations, $2,000mg{\cdot}L^{-1}$ daminozide at stage II recorded the highest angle of flower cluster and showed 31.3% increment as compared to control. The number of fully expanded flowers showed the highest values using $2,000mg{\cdot}L^{-1}$ daminozide at stage III than the other treatments and total floral buds also showed the highest values using $2,000mg{\cdot}L^{-1}$ daminozide at stage I than the other treatments. In cut spray chrysanthemum cultivar 'Ilweol' bred in Korea, foliar-applying with $2,000mg{\cdot}L^{-1}$ at stage III most effectively suppressed excessive peduncle elongation, angle of flower cluster, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length and flower diameter. Therefore, we recommended that foliar application stage and daminozide concentration was stage III and $500mg{\cdot}L^{-1}$, respectively, in a practical culture and cut flower quality for 'Ilweol'.
Jeong, Su Jung;Lim, Joo Hwan;Koh, Hyung Chul;Ha, Seong Yong
Membrane Journal
/
v.26
no.2
/
pp.159-165
/
2016
Polyimide hollow fiber membrane modules were prepared in order to investigate the process of multi stage gas separation. The modules performance was carried out using 50/50 of $N_2/SF_6$ mixed gas. The membrane modules has been tested for measuring gas flow rate and concentration under various stage cut at 0.5 MPa. The membrane modules showed a high recovery ratio at the same stage cut as $N_2/SF_6$ selectivity increased. Two stage process was fulfilled for improving $SF_6$ recovery ratio and $SF_6$ concentration. Eventually, two stage process showed higher performance of $SF_6$ recovery ratio and concentration ($SF_6$ recovery ratio = 95%, $SF_6$ conc. = 98%).
Lee, Chung Seop;Cho, Eun Hye;Ha, Seong Yong;Rhim, Ji Won
Membrane Journal
/
v.22
no.4
/
pp.251-257
/
2012
For the separation and recovery of n-pentane from nitrogen environment, the poly (dimethyl siloxane) (PDMS) composite membranes supported by polyetherimide (PEI) hollow fiber membranes were prepared. To characterize the gas separation properties of the resulting membranes, the permeance of n-pentane and nitrogen, concentrations of permeate and retentate, and recovery ratio were measured for n-pentane and nitrogen mixtures. The permeance of n-pentane and nitrogen, 2485.3 and 9.9 GPU, were observed respectively. As the stage cut decreases and the feed concentration increases, the n-pentane concentration in permeate tends to increase. In the meanwhile, the recovery efficiency tends to increase as the stage cut increases and the feed concentration decreases.
Kim, Se-Jong;Lee, Chung-Seop;Koh, Hyung-Chul;Ha, Seong-Yong;Nam, Sang-Yong;Rhim, Ji-Won;Choi, Whee-Moon
Membrane Journal
/
v.22
no.1
/
pp.54-61
/
2012
To separate and recover of VOCs, supporting membranes using PEI were prepared by phase separation method and it was coated with PDMS to prepare PEI-PDMS hollow composite membrane. To investigate characteristic of prepared membrane, pure gas permeability was measured using oxygen and nitrogen, the stage cut and permeance property with feed concentration were evaluated using xylene, ethyl benzene, toluene and cyclohexane. Also, to check solvent resistance on VOCs, stress-strain property of membrane with immersion time in solvent were measured by DMA. The permeance value of $O_2$ and $N_2$ showed 63 GPU and 30 GPU respectively. Permeated VOCs concentration was decreased with increasing stage cut. But, conversely, recovery efficiency that was increased with increasing stage cut. As a result of DMA test, the stress and strain were 11.93 MPa and 13.52%, respectively.
This study was conducted to investigate optimal harvesting stage and the effects on cut roses of Korean cultivar harvested at different stages. Cut roses are harvested at three different flowering stages. The optimal harvesting stage of cut roses was different depending on varieties. The vase life of standard type 'Pink Song' and spray type 'Peace One' was extended when they were harvested in one and three stages, respectively. The vase life was generally increased when the cut roses were pretreated with a solution containing 2% sucrose + $200mg{\cdot}L^{-1}$ aluminum sulfate + $200mg{\cdot}L^{-1}$$Mg(NO_3)_2$ + $50mg{\cdot}L^{-1}$$CaCl_2$ as compared to the control regardless of the harvesting stage. And this pretreatment solution improved the flower quality of cut roses bred in Korea. But the effects of pretreatment were varied depending on the harvesting stage.
This study was conducted to improve commercial quality of a cut spray chrysanthemum 'Gama' bred in Korea by foliar application of daminozide (DMZ), suppressing excessive elongation of peduncle caused by high temperature in summer season production. Applications were made at three floral bud developmental stages (I, II, and III), and concentrations used were 0, 500, 1000, and $2000mg{\cdot}L^{-1}$. Both cut flower length and peduncle length showed the greatest suppression of elongation by DMZ treatments at stage II. DMZ also gradually reduced values of those in a concentration-dependant manner. Stem thickness and flower diameter reduced compared to control as DMZ was sprayed at later stage and those two characteristics decreased in a concentration-dependant manner. The number of paralleled flowers neighboring apical part of whole plant showed the best results at stage I and II. As for DMZ concentration, those increased effectively at $500-1,000mg{\cdot}L^{-1}$. Among all combinations, $1,000mg{\cdot}L^{-1}$ DMZ at stage II recorded the most paralleled flowers and showed 24.2% increment as compared to control. The number of fully expanded flowers and total floral buds also showed the highest values using $1,000mg{\cdot}L^{-1}$ DMZ at stage II than the other treatments. In cut spray chrysanthemum cultivar 'Gama' bred in Korea, foliar-spraying with $1,000mg{\cdot}L^{-1}$ DMZ at stage II most effectively suppressed excessive peduncle elongation, parallelled flower cluster arrangement, and increased the number of flowers in summer. However, this combination affected negatively the other commercial qualities, reducing cut flower length, stem thickness, and flower diameter. Therefore, we recommended that foliar-spraying stage and DMZ concentration was stage I and $1,000mg{\cdot}L^{-1}$, respectively, in a practical culture for 'Gama'.
이메일무단수집거부
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.