• 제목/요약/키워드: stacked thin film

검색결과 77건 처리시간 0.03초

단결정 실리콘 태양전지에서 후열처리에 따른 $Al_2O_3/Si$ 계면조직의 특성 변화 (Interfacial Microstructure and Electrical Properties of $Al_2O_3/Si$ Interface of Mono-crystalline Silicon Solar Cells)

  • 백신혜;김인섭;천주용;천희곤
    • 반도체디스플레이기술학회지
    • /
    • 제12권3호
    • /
    • pp.41-46
    • /
    • 2013
  • Efficient and inexpensive solar cells are necessary for photo-voltaic to be widely adopted for mainstream electricity generation. For this to occur, the recombination losses of charge carriers (i.e. electrons or holes) must be minimized using a surface passivation technique suitable for manufacturing. Recently it has been shown that aluminum oxide thin films are negatively charged dielectrics that provide excellent surface passivation of silicon solar cells to attract positive-charged holes. Especially aluminum oxide thin film is a quite suitable passivation on the rear side of p-type silicon solar cells. This paper, it demonstrate the interfacial microstructure and electrical properties of mono-crystalline silicon surface passivated by $Al_2O_3$ films during firing process as applied for screen-printed solar cells. The first task is a comparison of the interfacial microstructure and chemical bonds of PECVD $Al_2O_3$ and of PEALD $Al_2O_3$ films for the surface passivation of silicon. The second is to study electrical properties of double-stacked layers of PEALD $Al_2O_3$/PECVD SiN films after firing process in the temperature range of $650{\sim}950^{\circ}C$.

분자배열된 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine 박막 제조와 전기적 특성 (Formation and Current-voltage Characteristics of Molecularly-ordered 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine film)

  • 강도순;최영선
    • 공업화학
    • /
    • 제18권5호
    • /
    • pp.506-510
    • /
    • 2007
  • 전기적 특성을 가지는 4,4',4''-tris(N-(1-naphthyl)-N-phenylamino)-triphenylamine (1-TNATA)가 유기발광소자(OLED)에서 전극으로 사용되는 ITO (Indium Tin Oxide)와 홀 수송층(Hole Transport Layer, HTL) 사이에 박막으로 진공증착되었다. 분자배열이 잘 되어진 1-TNATA의 경우 ITO와 홀 수송층 사이의 계면에서 생기는 전하주입장벽을 줄임으로 소자의 안정성과 효율을 높여준다. 본 연구에서의 라만 스펙트라(Raman spectra) 분석 결과, 증착된 1-TNATA 박막의 열처리와 증착하는 동안 전자기장 처리에 의해서 박막이 집적되고 분자배열이 이루어짐을 확인하였다. 열처리를 한 경우 1-TNATA 박막으로의 전류 흐름이 25% 증가하였다. 또한, $110^{\circ}C$에서 열처리한 1-TNATA 박막으로 제조된 다층유기발광소자의 전원 효율과 발광효율이 향상되었다. 열처리한 박막이 전자기장으로 처리한 박막에 비해 높은 효율을 나타내었다.

The electrical characteristics of flexible organic field effect transistors with flexible multi-stacked hybrid encapsulation

  • 설영국;허욱;박지수;이내응;이덕규;김윤제;안철현;조형균
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2010년도 제39회 하계학술대회 초록집
    • /
    • pp.176-176
    • /
    • 2010
  • One of the critical issues for applications of flexible organic thin film transistors (OTFTs) for flexible electronic systems is the electrical stabilities of the OTFT devices, including variation of the current on/off ratio (Ion/Ioff), leakage current, threshold voltage, and hysteresis under repetitive mechanical deformation. In particular, repetitive mechanical deformation accelerates the degradation of device performance at the ambient environment. In this work, electrical stability of the pentacene organic thin film transistors (OTFTs) employing multi-stack hybrid encapsulation layers was investigated under mechanical cyclic bending. Flexible bottom-gated pentacene-based OTFTs fabricated on flexible polyimide substrate with poly-4-vinyl phenol (PVP) dielectric as a gate dielectric were encapsulated by the plasma-deposited organic layer and atomic-layer-deposited inorganic layer. For cyclic bending experiment of flexible OTFTs, the devices were cyclically bent up to 105 times with 5mm bending radius. In the most of the devices after 105 times of bending cycles, the off-current of the OTFT with no encapsulation layers was quickly increased due to increases in the conductivity of the pentacene caused by doping effects from $O_2$ and $H_2O$ in the atmosphere, which leads to decrease in the Ion/Ioff and increase in the hysteresis. With encapsulation layers, however, the electrical stabilities of the OTFTs were improved significantly. In particular, the OTFTs with multi-stack hybrid encapsulation layer showed the best electrical stabilities up to the bending cycles of $10^5$ times compared to the devices with single organic encapsulation layer. Changes in electrical properties of cyclically bent OTFTs with encapsulation layers will be discussed in detail.

  • PDF

고온 신뢰성 시험에서 발생된 플렉서블 OLED의 휨 변형 (Warpage of Flexible OLED under High Temperature Reliability Test)

  • 이미경;서일웅;정훈선;이정훈;좌성훈
    • 마이크로전자및패키징학회지
    • /
    • 제23권1호
    • /
    • pp.17-22
    • /
    • 2016
  • 플렉서블 OLED는 매우 다양한 유기(organic) 및 무기 물질로 이루어져 있으며, 각 층을 증착하는 과정에 의하여 고온에 의한 휨(warpage)이 발생한다. 휨으로 인하여 발생한 굽힘 변형은 후속 공정에 많은 영향을 미치며, 궁극적으로 생산 수율 및 신뢰성을 저하시킨다. 본 연구에서는 플렉서블 OLED 소자의 고온 환경신뢰성 시험 및 공정 단계에서 발생하는 휨 변형을 수치해석을 이용하여 예측하였으며 실험 결과와 비교하였다. 이를 통하여 휨에 가장 큰 영향을 미치는 재료를 파악하고, 궁극적으로 휨을 최소화 함으로써 플렉서블 OLED의 신뢰성을 향상시키고자 하였다. 휨의 측정 및 수치해석 결과, 편광 필름과 베리어 필름이 휨에 많은 영향을 줌을 알 수 있었으며, OCA가 휨에 미치는 영향은 미미하였다. 플렉서블 OLED의 휨에 가장 큰 영향을 주는 소재는 plastic cover이였으며, 휨을 최소화하기 위한 plastic cover 소재의 최적 물성을 실험계획법으로 계산한 결과, 탄성 계수는 4.2 GPa, 열팽창계수는 $20ppm/^{\circ}C$ 일 경우 플렉서블 OLED의 휨은 1 mm 이하가 됨을 알 수 있었다.

Volumetric Capacitance of In-Plane- and Out-of-Plane-Structured Multilayer Graphene Supercapacitors

  • Yoo, Jungjoon;Kim, Yongil;Lee, Chan-Woo;Yoon, Hana;Yoo, Seunghwan;Jeong, Hakgeun
    • Journal of Electrochemical Science and Technology
    • /
    • 제8권3호
    • /
    • pp.250-256
    • /
    • 2017
  • A graphene electrode with a novel in-plane structure is proposed and successfully adopted for use in supercapacitor applications. The in-plane structure allows electrolyte ions to interact with all the graphene layers in the electrode, thereby maximizing the utilization of the electrochemical surface area. This novel structure contrasts with the conventional out-of-plane stacked structure of such supercapacitors. We herein compare the volumetric capacitances of in-plane- and out-of-plane-structured devices with reduced multi-layer graphene oxide films as electrodes. The in-plane-structured device exhibits a capacitance 2.5 times higher (i.e., $327F\;cm^{-3}$) than that of the out-of-plane-structured device, in addition to an energy density of $11.4mWh\;cm^{-3}$, which is higher than that of lithium-ion thin-film batteries and is the highest among in-plane-structured ultra-small graphene-based supercapacitors reported to date. Therefore, this study demonstrates the potential of in-plane-structured supercapacitors with high volumetric performances as ultra-small energy storage devices.

Characterization of Cu2ZnSnSe4 Thin Films Selenized with Cu2-xSe/SnSe2/ZnSe and Cu/SnSe2/ZnSe Stacks

  • Munir, Rahim;Jung, Gwang Sun;Ko, Young Min;Ahn, Byung Tae
    • 한국재료학회지
    • /
    • 제23권3호
    • /
    • pp.183-189
    • /
    • 2013
  • $Cu_2ZnSn(S,Se)_4$ material is receiving an increased amount of attention for solar cell applications as an absorber layer because it consists of inexpensive and abundant materials (Zn and Sn) instead of the expensive and rare materials (In and Ga) in $Cu(In,Ga)Se_2$ solar cells. We were able to achieve a cell conversion efficiency to 4.7% by the selenization of a stacked metal precursor with the Cu/(Zn + Sn)/Mo/glass structure. However, the selenization of the metal precursor results in large voids at the absorber/Mo interface because metals diffuse out through the top CZTSe layer. To avoid the voids at the absorber/Mo interface, binary selenide compounds of ZnSe and $SnSe_2$ were employed as a precursor instead of Zn and Sn metals. It was found that the precursor with Cu/$SnSe_2$/ZnSe stack provided a uniform film with larger grains compared to that with $Cu_2Se/SnSe_2$/ZnSe stack. Also, voids were not observed at the $Cu_2ZnSnSe_4$/Mo interface. A severe loss of Sn was observed after a high-temperature annealing process, suggesting that selenization in this case should be performed in a closed system with a uniform temperature in a $SnSe_2$ environment. However, in the experiments, Cu top-layer stack had more of an effect on reducing Sn loss compared to $Cu_2Se$ top-layer stack.

상품성 제고를 위한 고구마 수확 후 관리 및 출하기술 (Postharvest Handling and Marketing Management for Making High Salability of Sweetpotatoes)

  • Jeong, Byeong-Choon
    • 한국식품저장유통학회:학술대회논문집
    • /
    • 한국식품저장유통학회 2001년도 임시총회 및 제18차 학술발표회 발표논문초록집
    • /
    • pp.51-64
    • /
    • 2001
  • The qualities including taste of sweetpotato stored during the winter which can display in the spring market in Korea are affected by availability of storage for the roots. In order to make high storage availability of sweetpotato, the postharvest handlings should be done thoroughly from the moment of harvest until shipping them to the market. A lot of procedures that must be handled carefully for improving postharvest management are as follows; digging, trimming, gathering, putting in storage containers, carrying them from field to house, curing, storing, washing, drying, selecting marketable roots, packing and shipping to the market, etc.. Sweetpotatoes have a high moisture content, and a relatively thin and delicate skin, and are sensitive to chilling, so careless postharvest handling can lead to both quantitative and qualitative losses which may be extremely high in some circumstances. From now on research has concentrated on the improvement of postharvest conditions to increase yield and lower disease rates. Storage, which makes sweetpotatoes available through out the year, benefits both the producer and the consumer. Seven very important points must be needed in order to get the best quality marketable roots in the storing of sweetpotatos : $\circled1$The storage house must be clean and sanitary, $\circled2$The crop must be harvested before the first frost to avoid low-temperature injury, $\circled3$Particular care must be taken to avoid cutting, bruising, or other injuries of the sweetpotatoes during digging, picking up, grading, placing in containers, and moving to the storage house, $\circled4$Select sound, disease-free roots for storage $\circled5$Sweetpotatoes should be stored in properly stacked containers $\circled6$Cure immediately after harvest, preferably at 32∼33$^{\circ}C$ and 90 to 95 percent relative humidity for 4 to 7 days, After curing the temperature should be reduced to 13$^{\circ}C$ to 16$^{\circ}C$ by ventilating the storage with outside air. $\circled7$Store at 12$^{\circ}C$ to 14$^{\circ}C$ and a relative humidity of 80 to 85 percent. Storage houses should be located on suitable sites and should be tightly constructed and insulated so that temperature and humidity will be uniform. Sweetpotatoes are usually not washed and graded, and lately sometimes washed, graded, waxed, before being shipped to market. Consumer packaging of sweetpotatoes in paper boxes(10-15kg) or film bags is done mainly to aid marketing. The shelf life of washed roots in consumer packs in only 1 to 2 weeks. Weight loss of roots during marketing is much less in perforated film bags than in mesh and paper bags. Perforation of 0.8 to 1kg polyethylene bags with about six 6mm holes is essential ; to lower the internal relative humidity and avoid excessive sprouting, rooting, and dampness. Development and use of better postharvest handling with good storage facilities or marketing methods can minimize sweetpotate losses and has an effect of indirectly increasing productivity and farmer’s income.