• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2002년도 제25회 KOSCI SYMPOSIUM 논문집
• /
• pp.149-155
• /
• 2002

A promising new approach to achieve low pollutants emission and improvement of flame stabilities is tested experimentally using a hybrid cyclone jet combustor employing both premixed and diffusion combustion mode, Three kind of nozzles are used for LNG(Liquified Natural Gas) as a fuel. The combustor is operated by two method, One is ATI(Air Tangential Injection) mode, generated swirl flow by air as general swirl combustor, and the other is PTI(Premixed gas Tangential Injection) mode, The PTI mode consists of diffusion flame of axial direction and premixed cyclone flame of tangential direction in order to stabilized the diffusion flame. The results showed that the stable region of the PTI mode is more larger than the ATI mode. In addition, the reduction of NOx emission in PTI mode, as compared with that for the ATI mode is at least 50% in stable region. Also, even using the low calorific fuel as $CO_2$-blended gas, the cyclone jet combustor has high performance of flame stability.

• 대한기계학회논문집B
• /
• 제20권1호
• /
• pp.328-335
• /
• 1996

The one-dimensional flame analysis was carried out to understand the combustion phenomena in porous media. The downstream as well as upstream solution corresponding to upper and lower solutions could be obtained. While upper flame temperature gets higher, lower flame temperature gets lower, as the flame approaches the central part of the combustor. The reason why upstream flame and downstream flame exist at the same flow condition is that the regions where net heat recirculation is identical exist in upstream and downstream of the combustor. In order for the downstream flame to be stabilized, more heats needed to be recirculated towards upstream because of larger radiation loss of downstream flame.

• 한국연소학회지
• /
• 제2권1호
• /
• pp.1-8
• /
• 1997

Premixed combustion within porous ceramic media is numerically studied to understand burning characteristics and to find best configurations for burner implementations. Among many parameters, critical to burner performance, flame location and extinction coefficient are selected as major parameters for this study. The flame structure and burner performance with respect to these two parameters are observed. In the study, it is found that the location of flame is the most important in porous burner operation since it affects the rate of heat transfer and flame structure. Stability of the flame within the porous ceramic burner is discussed with respect to the flame location. It is found that to obtain high radiative output, the flame should be located downstream section of the burner. But the flame is to be unstable at most of downstream section except near the exit plane. To overcome this problem, new porous ceramic burner, using different ceramic properties in one burner instead of single property ceramic, is made and tested. With a combination of ceramics of high extinction coefficient at upstream and another material of low extinction coefficient at downstream of the burner, the flame can be stabilized at wider region of the burner with higher radiative output compared to the original burner configuration.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권8호
• /
• pp.1084-1093
• /
• 2010

화염 전파 특성을 나타내는 G 방정식에 기초한 Sub-grid Scale연소 모델을 이용하여 보염기 주위의 난류 예혼합 연소 해석에 관한 대 와동 모사를 수행하였다. Dynamic SGS 모델이 G방정식에 도입되었으며, 삼각형의 보염기 배면의 예혼합 연소 유동에 의해 검증되었다. 해석결과는 실험결과와의 비교를 통해 속도와 온도분포를 잘 예측하고 있음을 확인하였다.

• 한국연소학회지
• /
• 제5권1호
• /
• pp.31-41
• /
• 2000

A numerical study was conducted to investigate the combustion phenomena of regular start and unstart processes based on ISL#s RAMAC 30 experiments with different diluent amounts in a ram accelerator. The initial projectile launching speed was 1800m/s which corresponded to the superdetonative speed of the stoichiometric $H_2/O_2$ mixture diluted with $5CO_2\;or\;4CO_2$. In this study, it was found that neither shock nor viscous heating was sufficient to ignite the mixture at a low speed of 1800m/s, as was found in the experiments using a steel-covered projectile. However, we could succeed in igniting the mixtures by imposing a minimal amount of additional heat to the combustor section and simulate the regular start and unstart processes found in the experiments with an aluminum-covered projectile. The numerical results matched almost exactly to the experimental results. As a result, it was found that the regular start and unstart processes depended on the strength of gas mixture, development of shock-induced combustion wave stabilized by the first separation bubble, and its size and location.

• 한국연소학회지
• /
• 제14권4호
• /
• pp.41-47
• /
• 2009

An experimental study was performed to confirm the effect of the changing combustor pressure(-30~30 kpa), combustion characteristics were investigated by measuring the local chemiluminescence intensity, the local temperature distribution and emission. In order to investigate combustion ones, the combustor pressure index($P^*$) was controlled in the range of 0.7~1.3 for each equivalence ratio in the present combustion system, where $P^*$ is defined as the ratio of absolute pressure to atmospheric one. The local mean temperature showed the uniform distributions for lower pressure index, which increased with increasing equivalence ratio. The mean $OH^*$ chemiluminescence intensity, showed high level for lower pressure index for ${\Phi}{\get}1.0$ conditions. EINOx decreased with decreasing pressure index for overall equivalence ratio conditions.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.376-379
• /
• 2004

The purpose of this work is to develop an effective active control system for combustion instabilities of premixed combustors. For the first step, the natural modes of combustion oscillation were investigated for a methane-air premixed combustor and the controls by secondary fuel injection were examined. The main premixed flame is stabilized by a swirler with orifices for secondary injection installed on the central hub. For sensing purposes, a pressure transducer and a chemiluminescence sensor were placed on the appropriate positions. The acoustic characteristics and the source of the oscillation were analyzed by those signals. To test the controllability, two methods of actuations by secondary fuel injection were examined. One is the open loop control and the other is the closed loop control. The comparison of the reduction levels of p $_{rms}$ shows that the closed loop control with a phase-shift injection performs best in this condition.ition.n.

• 한국추진공학회지
• /
• 제18권6호
• /
• pp.11-18
• /
• 2014

아산화질소/에탄올 추진제 조합을 사용하는 50 N급 추력기 분사기 인접부에서 shadowgraph 기법을 사용하여 연소 유동장을 가시화하였다. 설계 작동조건에서 폭발성 점화가 일어났으며, 급격히 팽창하는 연소가스에 의해 순간적으로 소염되는 현상이 관찰되었다. 최초 점화로부터 약 83 ms 뒤 추진제 분무는 재점화 되었으며, 그로부터 약 23 ms 후 화염이 안정화되는 것이 관찰되었다. 동일한 시퀀스에서 설계 조건보다 산화제 유량을 증가시킨 경우, 소염 현상 없이 완만한 연소 압력 과도 특성을 보였으며 최초 점화로부터 약 17 ms이내에 화염 안정화가 이루어졌다. 이는 점화 직전의 연소기 내부 미연 추진제 혼합 향상에 의한 것으로 생각되었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년도 제31회 추계학술대회논문집
• /
• pp.449-452
• /
• 2008

환형 스월 난류 연소기 내에서 반응, 비반응시 발생하는 유동의 차이를 flamelet 난류연소와 난류유동 모델을 모두 고려한 3차원 LES 기법으로 연구하였다. 계산 모델은 GEAE의 LM6000 환형연소기를 이용하였으며, 조건은 실험에서 얻어진 값을 이용하였다. 연소시 열방출에 의해 연소가스의 체적이 팽창하고 이로 인해 유입되는 스월의 주흐름은 하류방향으로 더욱 뻗어나간다. 비반응에서 나타났던 수직 단면에서의 타원형의 속도 분포는 원형에 가깝게 변하며, 비반응 유동장에서는 와류의 분포가 광범위하게 나타나지만, 반응유동에서는 약한 와류들은 소멸되는 것으로 나타났다. 즉 반응과 비반응에서 와류 분포와 강도, 그리고 동일 세기의 와류의 크기가 확연히 다르게 나타나는데, 이는 연소에 의한 밀도 팽창에 의한 영향으로 판단된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권1호
• /
• pp.82-88
• /
• 2011

본 연구의 목적은 실용연소기를 대상으로 한 복잡한 난류 연소장에의 Dynamic SGS G-방정식의 유용성을 확인하는 데에 있다. 본 연구에서는 sub-grid 난류확산과 화염 두께에 근거한 새로운 난류화염 전파속도 모델을 제안하였으며, sub-grid 난류강도를 이용한 기존 모델과의 비교, 검증을 수행하였다. 해석결과는 실험결과와의 비교를 통해 속도와 온도분포를 잘 예측하고 있음을 확인하였다.