• 대한수학회지
• /
• 제49권3호
• /
• pp.515-536
• /
• 2012

This work focuses on the general decay stability of nonlinear stochastic differential equations with unbounded delay. A Razumikhin-type theorem is first established to obtain the moment stability but without almost sure stability. Then an improved edition is presented to derive not only the moment stability but also the almost sure stability, while existing Razumikhin-type theorems aim at only the moment stability. By virtue of the $M$-matrix techniques, we further develop the aforementioned Razumikhin-type theorems to be easily implementable. Two examples are given for illustration.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.41-45
• /
• 1997

To design a control system, it is a elementary point that the stability of the system should be guaranteed. Also, the phase of the system plays an important role for its frequence performance. In this paper, we present two stability criterion of repetitive control system with phase-lead and lag compensator. First, the stability criterion for the servo control system with phase-lead and lag compensator is shown by using small-gain theorem. Second, for the repetitive control system with the compensator, the stability criterion, also, is determined by using small-gain theorem. Two stability criterions show the same results that the stability depends on a coefficient of the phase-lead and lag compensator under some condition in servo control system and repetitive control system.

• Safety and Health at Work
• /
• 제3권3호
• /
• pp.192-198
• /
• 2012

Objectives: Slip and fall accidents in the workplace are one of the top causes of work related fatalities and injuries. Previous studies have indicated that fall risk was related to postural and dynamic stability. However, the usage of this theoretical relationship was limited by laboratory based measuring instruments. The current study proposed a new method for stability assessment by use of inertial measurement units (IMUs). Methods: Accelerations at different body parts were recorded by the IMUs. Postural and local dynamic stability was assessed from these measures and compared with that computed from the traditional method. Results: The results demonstrated: 1) significant differences between fall prone and healthy groups in IMU assessed dynamic stability; and 2) better power of discrimination with multi stability index assessed by IMUs. Conclusion: The findings can be utilized in the design of a portable screening or monitoring tool for fall risk assessment in various industrial settings.

• 대한가정학회지
• /
• 제31권2호
• /
• pp.81-96
• /
• 1993

The purpose of this study is to investigate how external pressures to remain married and alternative attractions to a marriage influence the relationship between marital satisfaction and marital stability. A total of 228 married women in Seoul responded to structured questionnaires. The major findings are as follows; 1. While the marital satisfaction is positively associated with the marital stability, the alternative attractions to a marriage are negatively associated with the marital stability. But there is no significant correlation between external pressures to remain married and marital stability. 2. The relationship strength between marital satisfaction and marital stability according to the level of external pressures to remain married and actual alternatives to a marriage is not appeared significant difference. 3. When the external pressures to remain marred are low and the imaginary alternatives to a marriage are low, marital satisfaction is the most powerful predictor of marital stability. 4. Whether wife has a job and marital satisfaction affected the marital stability independently.

• 동력기계공학회지
• /
• 제14권3호
• /
• pp.39-45
• /
• 2010

The dynamic stability of a robot vehicle can be enhanced by the Force-Angle Stability Margin concept that considers a variety of dynamic effects. To evaluate the robot vehicle stability, a SPI(stability performance index), which is a function of the suspension arm angles, was used. If the SPI has a minimum value, the robot vehicle has maximum stability. The FASM and SPI concepts were incorporated in the mobility simulation by using ADAMS and MATLAB/Simulink. The simulation results using these concepts showed significant improvements of the vehicle stability on rough terrains.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.227-233
• /
• 2002

A vehicle longitudinal control strategy with guaranteed string stability for vehicle stop-and-go(SG) cruise control is presented in this paper. The SG cruise control systems should be designed such that string stability can be guaranteed in addition to that every vehicle in a string of SG cruise control vehicles must track any bounded acceleration and velocity profile of its preceding vehicle with a bounded spacing and velocity error. An optimal vehicle following control law based on the information of the 1311owing distance (clearance) and its velocity relative to the vehicle ahead (relative velocity) has been used and string stability analysis has been done based on the control law and constant time gap spacing policy, A validated multi-vehicle simulation package has been shown that the string stability analysis using the approximate model of the vehicle servo-loop which includes vehicle powertrain and brake control system dynamics is valid in the design of the SG cruise control law with guaranteed string stability.

• 설비공학논문집
• /
• 제2권4호
• /
• pp.268-278
• /
• 1990

Hydrodynamic stability equations are formulated for natural convection flows adjacent to a heated or cooled, inclined, isothermal surface in pure water at $4^{\circ}C$, where the density variation with temperature becomes nonlinear. The resulting stability equations, when reduced to ordinary differential equations by a similarity transformation, constitute a two-point boundary-value problem, which was solved numerically. It is found from the obtained stability results that the neutral stability curves are systematically shifted to have lower critical Grashof numbers, as the inclination angle of upward-facing plate increases. Also, the nose of the neutral stability curve becomes blunter as the angle increases. It implies that the greater the inclination of the upward-facing plate, the more susceptible of the flow to instability for the wide range of disturbance wave number and frequency.

• 유공압시스템학회:학술대회논문집
• /
• 유공압시스템학회 2010년도 춘계학술대회
• /
• pp.12-17
• /
• 2010

The poppet valve had used every field area due to high quality of leakage property and response characteristic. But this valve still has terrible disadvantage that is self-exited vibration. This problem affects stability of total system and raises noise. The researcher tries to reduce that self-exited vibration when valve was designed. The stability discriminant is the typical study to improve the performance of the poppet valve. This paper concerns about stability discriminant that uses poppet valve with a drain orifice. At the first, the mathematical model is computed from poppet valve. After that, the limitation of stability is calculated that based on Nyquist criterion. At the final, the stability discriminant is selected in each condition and the graph that shows stability in the system is drown by dimensionless quantity.

• 대한전기학회논문지:전력기술부문A
• /
• 제49권2호
• /
• pp.43-49
• /
• 2000

It is a complex process to analyze power system voltage stability problems with all of the dynamics of a system, because a large power network system sophisticatedly consists of generators, lines, loads and so forth. So we considered the dynamics of loads so as to analyze voltage stability method- by carrying out an analysis of steady state voltage stability and dynamic voltage stability simultaneously. To perform a steady state voltage stability program in advance makes it possible to cut down on laborious calculations so that an analysis of dynamic voltage stability becomes concise. The validity and efficiency of the method presented in this paper were verified by applying the IEEE 14 bus system.

• 한국항공우주학회지
• /
• 제32권10호
• /
• pp.93-101
• /
• 2004

액체 로켓엔진에서 발생하는 고주파 연소 불안정성을 예측하기 위해 선형 안정한계를 계산하는 방법을 연구하였다. 기존의 선형이론에 근거하여 유도된 선형 안정한계를 나타내는 안정한계 식을 채택하였으며, 그 식을 구성하는 각각의 항을 정량적으로 평가하는 방안들이 제시되었다. 안정한계 계산에 필요한 열-화학 물성치와 유동 변수를 열역학적 평형계산과 CFD 해석 및 실험 결과로부터 평가하는 구체적 절차들을 상세히 제시하였다. 실제 로켓엔진으로서 시험 데이터가 확보되어 있는 KSR-III 로켓엔진에 대해서 제시한 방법을 적용하여 안정한계 곡선을 구하였다. 계산결과는, 해당 엔진에 대해 정량적으로 타당한 안정한계 곡선을 보여주었다. 이를 토대로 해당 엔진의 안정성 특성을 분석하였다. 본 연구에서 제시된 선형 안정한계 계산 방법은 진정한 예측의 1차적 근사로서 활용할 만한 가치가 있으며, 엔진 개발 초기에 근사적으로 안정성 경향을 분석하기에 유용할 것이다.