• Geomechanics and Engineering
• /
• v.30 no.1
• /
• pp.11-26
• /
• 2022

One of the most important issues in tunneling, is the squeezing phenomenon. Squeezing can occur during excavation or after the construction of tunnels, which in both cases could lead to significant damages. Therefore, it is important to predict the squeezing and consider it in the early design stage of tunnel construction. Different empirical, semi-empirical and theoretical-analytical methods have been presented to determine the squeezing. Therefore, it is necessary to examine the ability of each of these methods and identify the best method among them. In this study, squeezing in a part of the Alborz service tunnel in Iran was estimated through a number of empirical, semi- empirical and theoretical-analytical methods. Among these methods, the most robust model was used to obtain a database including 300 data for training and 33 data for testing in order to develop a machine learning (ML) method. To this end, three ML models of Gaussian process regression (GPR), artificial neural network (ANN) and support vector regression (SVR) were trained and tested to propose a robust model to predict the squeezing phenomenon. A comparative analysis between the conventional and the ML methods utilized in this study showed that, the GPR model is the most robust model in the prediction of squeezing phenomenon. The sensitivity analysis of the input parameters using the mutual information test (MIT) method showed that, the most sensitive parameter on the squeezing phenomenon is the tangential strain (ε_θ^α) parameter with a sensitivity score of 2.18. Finally, the GPR model was recommended to predict the squeezing phenomenon in tunneling projects. This work's significance is that it can provide a good estimation of the squeezing phenomenon in tunneling projects, based on which geotechnical engineers can take the necessary actions to deal with it in the pre-construction designs.

• Tunnel and Underground Space
• /
• v.13 no.4
• /
• pp.245-259
• /
• 2003

Refering to the articles "Squeezing rocks in tunnels(Barla, 1995)" and "Tunnelling under squeezing rock conditions(Barla 2002)" this article deals with technologies for design, stability analysis and construction of the tunnel being driven in the squeezing rock mass. The definition of this type of behavior was proposed by ISRM(1994). The identification and quantification of squeezing is given according to both the empirical and semi-empirical methods available to anticipate the potential of squeezing problems in tunnelling. Based on the experiences and lessons learned in recent years, the state of the art in modem construction methods was reported, when dealing with squeezing rock masses by either conventional or mechanical excavation methods. The closed-form solutions available for the analysis of the rock mass response during tunnel excavation are described in terms of the ground characteristic line and with reference to some elasto-plastic models for the given rock mass. Finally numerical methods were used for the simulation of different models and for design analysis of complex excavation and support systems, including three-dimensional conditions in order to quantify the influence of the advancing tunnel face to the deformation behavior of the tunnel.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.4
• /
• pp.577-584
• /
• 2010

Objectives : The purpose of this study was to examine the relationship of toothpaste-squeezing methods to the amount of toothpaste used among adults. Methods : The subjects in this study were 227 freshmen in a local college. After the intent of a survey was explained by this researcher, how much dentifrice they used was checked to ensure statistical objectivity, and then a survey was conducted. The collected data were analyzed with a SPSS WIN 13.0 program. Results : The findings of the study were as follows:1. As for connections between the way of squeezing and the amount used, the usual amount used, the amount used by horizontal squeezing and the amount used by pea-sized squeezing were respectively 1.12g, 0.66g and 0.46g. The amount used by horizontal squeezing and pea-sized squeezing was less than the usual amount used by 0.46g(41%) and 0.66g(59%) respectively.2. Gender, residential area, educational experiences and daily mean toothbrushing frequency made no differences to the amount of toothpaste used.3. The students who normally used a larger amount of toothpaste used a greater amount of toothpaste as well when they utilized horizontal squeezing and pea-sized squeezing, and the larger amount used by horizontal squeezing led to the greater amount used by pea-sized squeezing. Conclusions : As there were large disparities in the amount of toothpaste used according to the squeezing methods, systematic research efforts should be directed into setting the standard for the recommended amount of toothpaste used for adults and into squeezing method so that they could brush their teeth in an effective manner by using the minimum amount of toothpaste.

• Reproductive and Developmental Biology
• /
• v.30 no.3
• /
• pp.207-212
• /
• 2006

The aim of this study was to examine the effect of mechanical enucleation methods, aspiration and squeezing, on the developmental ability of nuclear transfer bovine embryos. Enucleated oocytes made by both enucleation methods were fused to adult ear skin cells. After 7 days of culture, developmental ability up to blastocyst stage was similar in both squeezing($33.6{\pm}15.7%$) and aspiration enucleation methods($31.9{\pm}13.4%$). The proportion of blastocysts at Day 8 of culture was also similar between the aspiration($37.8{\pm}10.4%$) and squeezing enucleatign s($35.3{\pm}15.1%$). The mean cell number in Day 7 blastocysts was also similar between the both groups(aspiration: $110.3{\pm}39.2$ vs. squeezing: $103.7{\pm}42.8$). The ratio of apoptotic cells was also found to be not significant different between the both groups(aspiration: $2.8{\pm}2.6%$ vs. squeezing: $4.3{\pm}4.4%$). These results suggest that aspiration and squeezing methods, as mechanical enucleation technique, are both useful for the production of bovine somatic cell nuclear transfer embryos.

• Journal of the Korean Society of School Health
• /
• v.22 no.1
• /
• pp.67-72
• /
• 2009

Purpose: The purpose of this study was to examine the relationship between the toothpaste squeezing methods and the amount of toothpaste that the daycare teachers apply for the children in order to prevent the overuse of fluoride-containing toothpaste among children, and to understand their educational experiences on oral health and their awareness of the right amount of toothpaste used. Methods: The subjects in this study were 87 teachers at 16 different daycare centers in the city of Sokcho, Gangwon Province. They were interviewed to find out whether they had ever received oral health education and whether they were cognizant of the right amount of toothpaste to be used. And a transverse technique and a pea-sized squeezing technique were selected to look for connections between their toothpaste squeezing methods and the amount of toothpaste used by them. Results: 89.7 percent of the daycare teachers investigated taught to preschoolers how to do toothbrushing after they took meals and had a snack. 36.8 percent of the daycare teachers had children squeeze toothpaste on their own. The amount of toothpaste applied by the daycare teachers at a time was 0.58ｇ. When they utilized two other squeezing methods, transverse technique and pea-sized squeezing technique, they used each 0.38 g (p<0.005) and 0.38 g (p=0.405) of toothpaste. Conclusion: To prevent children from being overly exposed to fluoride-containing toothpaste, daycare teachers should learn about the right amount of toothpaste to be used when oral health education is provided, and the transverse technique should be recommended to ensure the use of the proper amount of toothpaste.

• The Korean Journal of Emergency Medical Services
• /
• v.21 no.1
• /
• pp.99-109
• /
• 2017

Purpose: There is no recommended bag-squeezing technique for emergency medical providers to maintain correct tidal volume during mechanical ventilation. This study compared the tidal volume of two different bag-squeezing techniques during mechanical ventilation. Methods: The subjects were 38 paramedic students who were trained in airway management techniques. Two different bag-squeezing techniques were used with a bag valve mask on an intubated manikin: a conventional technique and a finger-marked, in which the bag is squeezed until the thumb and the middle finger come into contact. Hand size and grip strength were measured and analyzed statistically. Results: The mean tidal volumes for the finger-marked were significantly higher than those for the conventional technique ($542.6{\pm}35.92mL$ versus $338.0{\pm}111.15 mL$, p<.001). There was a correlation between the two techniques (Pearson $x^2=1.160$, p<.001). The subject's characteristics, including sex, hand size, and grip strength, showed no correlation with tidal volume. Conclusion: A finger-marked bag-squeezing technique provides adequate and correct tidal volumes during mechanical ventilation.

• Geomechanics and Engineering
• /
• v.18 no.2
• /
• pp.215-224
• /
• 2019

Excavation of long tunnels by shielded TBMs is a safe, fast, and efficient method of tunneling that mitigates many risks related to ground conditions. However, long-distance tunneling in great depth through adverse geological conditions brings about limitations in the application of TBMs. Among various harsh geological conditions, squeezing ground as a consequence of tunnel wall and face convergence could lead to cluttered blocking, shield jamming and in some cases failure in the support system. These issues or a combination of them could seriously hinder the performance of TBMs. The technique of excavation has a strong influence on the tunnel response when it is excavated under squeezing conditions. The Golab water conveyance tunnel was excavated by a double-shield TBM. This tunnel passes mainly through metamorphic weak rocks with up to 650 m overburden. These metamorphic rocks (Shales, Slates, Phyllites and Schists) together with some fault zones are incapable of sustaining high tangential stresses. Prediction of the convergence, estimation of the creeping effects and presenting strategies to overcome the squeezing ground are regarded as challenging tasks for the tunneling engineer. In this paper, the squeezing potential of the rock mass is investigated in specific regions by dint of numerical and analytical methods. Subsequently, several operational solutions which were conducted to counteract the challenges are explained in detail.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2005.06a
• /
• pp.144-150
• /
• 2005

The size of ship is being larger than the past in the shipping industry thanks to the increased quantity of goods transported by ship. Therefore, HHIC (Hanjin Heavy industries & Construction co., LTD) invented innovative construction method, so called 'DAM', to build a ship which is longer than the length of the HHIC's dry dock. On Erection at the sea by the application of DAM Method, Squeezing & Detachment of A/F film may occur as a result of the wave and the constriction between A/F film pre-applied on the side shell and DAM's Rubber Packing. Thus, the test for finding the minimum curing time of A/F film was performed to protect Squeezing & Detachment of A/F film on the hull. To verify the soundness of paint and to find the optimum condition during the erection period of the DAM, laboratory test was carried out under no immersion condition through the application of various coatings on the Rubber Packing. And two methods were selected from the results of laboratory test for actual MOCK-UP Test. In addition, the test for the film profile per temperature of silicone A/F coat and the film Squeezing was performed.

• Journal of Ocean Engineering and Technology
• /
• v.38 no.1
• /
• pp.30-42
• /
• 2024

This study examined the jack-up spudcan penetration for a new type of offshore wind substructure newly proposed using the jack-up concept to reduce construction costs. The jack-up spudcan for offshore wind turbines should be designed to penetrate a stable soil layer capable of supporting operational loads. This study evaluated multi-layered soil conditions using centrifuge tests: loose sand over clay and loose sand-clay-dense sand. The penetration resistance profiles of spudcan recorded at the centrifuge tests were compared with the ISO and InSafeJIP methods. In the tests, a spudcan punch-through effect slightly emerged under the sand-over-clay condition, and a spudcan squeezing effect occurred in the clay-over-sand layer. On the other hand, these two effects were not critically predicted using the ISO method, and the InSafeJIP result predicted only punch-through failure. Nevertheless, ISO and InSafeJIP methods were well-matched under the conditions of the clay layer beneath the sand and the penetration resistance profiles at the clay layer of centrifuge tests. Therefore, the ISO and InSafeJIP methods well predict the punch-through effect at the clay layer but have limitations for penetration resistance predictions at shallow depths and strong stratum soil below a weak layer.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.18 no.1
• /
• pp.68-75
• /
• 2009

A major disadvantage of thermal nanoimprint lithography(NIL) is the thermal cycle, that is, heating over glass transition temperature and then cooling below it, which requires a significant amount of processing time and limits the throughput. One of the methods to overcome this disadvantage is to make the processing temperature lower Accordingly, it is necessary to determine the effects on the processing parameters for thermal NIL at reduced temperatures and to optimize the parameters. This starts with a clear understanding of polymer material behavior during the NIL process. In this work, the squeezing and filling of thin polymer films into nanocavities during the low temperature thermal NIL have been investigated based upon a two-dimensional viscoelastic finite element analysis in order to understand how the process conditions affect a pattern quality; Pressure and initial polymer resist thickness dependency of cavity filling behaviors has been investigated.