• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.394-400
• /
• 2012

Due to the increasing demand for carious methodologies, the quality improvement of products were introduced. A brush, the most frequently used type of grinding process, is one of the deburring. In order to produce consistent burr shape, various machining conditions have been combined and applied to disk grinding process. By tool dynamometer, acoustic emission sensor and acceleration sensor depend on changes in processing conditions(depth of engagement, cutting speed, workpiece position, workpiece orientation, cutting time) signals were obtained for brush deburring grinding system. Root mean square obtained by processing the signal processing conditions by analyzing the characteristics of deburring is to derive the optimum conditions.

• 한국자동차공학회논문집
• /
• 제9권6호
• /
• pp.170-177
• /
• 2001

Turbine blade is subject to torsional load by torsion-mount, centrifugal load by rotation of rotor and repeated bending load by steam pressure. Turbine with partially cracked blade has normal working condition at initial repair time but vibratory working condition at middle repair time due to crack growth. Finite element analysis on turbine blade indicates that repeated bending load out of all loads is the most important factor on fatigue strength of turbine blade. Therefore, this study shows root mean square roughness has linear relation with stress intensity factor range in 12% Cr steel and can predict loading condition of fractured turbine blade.

• 한국유기농업학회지
• /
• 제25권2호
• /
• pp.279-293
• /
• 2017

This study suggests the yield forecast models for autumn chinese cabbage and radish using crop growth and development information. For this, we construct 24 alternative yield forecast models and compare the predictive power using root mean square percentage errors. The results shows that the predictive power of model including crop growth and development informations is better than model which does not include those informations. But the forecast errors of best forecast models exceeds 5%. Thus it is important to establish reliable data and improve forecast models.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2007년도 학술발표회 논문집
• /
• pp.142-146
• /
• 2007

본 연구에서는 강우강도식의 매개변수를 보다 효율적으로 산정하기 위해서 유전자알고리즘을 적용한 매개변수 산정법을 제시하였으며, 지속기간의 장, 단기간에 따른 매개변수의 변화를 고려하기 위하여 다목적 유전자알고리즘을 적용하여 매개변수를 추정한 후 기존의 강우강도식에 의한 결과와 비교해 보았다. 매개변수는 지점빈도해석을 통해 산정된 확률강우량을 사용하여 추정하였고, 유전자 알고리즘의 목적함수로는 Nash & Sutcliffe Index, Root Mean Square Error(RMSE), Relative Root Mean Square Error(RRMSE), 결정계수, 평균들을 사용하여 가장 효율적인 형태의 목적함수를 구성하였다. 그 결과 기존의 매개변수 추정 방법들에 비해 유전자알고리즘을 이용한 경우에 더 정확한 강우량값을 산정할 수 있었고, 특히 다목적 유전자 알고리즘을 사용할 경우 장기간과 단기간에 걸쳐서 동시에 정확도를 향상시킬 수 있는 매개변수를 추정할 수 있는 것으로 나타났다.

• 대한물리치료과학회지
• /
• 제10권1호
• /
• pp.83-89
• /
• 2003

An electromyogram (EMG) using surface electrodes is one of the indirect tests most frequently used to ascertain muscle fatigue. An EMG can be used in two ways. The first technique determines the root mean square (RMS), which reflects the amplitude of the EMG signal. The second technique determines the median and mean power frequencies through EMG power spectrum analysis. The purpose of this article is for determine the correlation between work and percent root mean square(%RMS) and between work and MDF of EMG based on muscle contractions. It is used the %RMS, which reflects the amplitude of the EMG signal For MDF, it is used the frequency power spectrum analysis method, which involves the fast Fourier transformation (FFT) of the original Signals.

• 한국광학회지
• /
• 제10권2호
• /
• pp.138-145
• /
• 1999

칼라 CTR(cathode ray tube) 모니터의 빔 전류와 화면위치를 변화시키면서 misconvergence, 스폿 크기, 디스플레이 휘도, 색도 좌표를 측정하였다. 일차원 CCD(charge coupled device)를 사용하여 misconvergence를 측정하였으며, 시감효과를 고려하는 SQRI(square-root integrals)를 도입하여 분해능을 나타내었다. 모니터의 miscovergence는 빔 전류에 영향을 받지 않고 화면의 위치에 따라 변하였으며, 화면 주변부에서의 misconvergence는 분해능을 저하시켰다.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.468-473
• /
• 2010

This paper deals with approximate integral solutions to the one-dimensional model describing the charging process of stratified thermal storage tanks. Temperature is assumed to be the form of Fermi-Dirac distribution function, which can be separated to two sets of cubic polynomials for each hot and cold side of thermal boundary layers. Proposed approximate integral solutions are compared to the previous works of the approximate analytic solutions and show reasonable agreement. The approach, however, has benefits in mathematical difficulties, complicated solution form and unstable convergence of series solution founded in the previous analytic solutions. Solutions for a semi-infinite region, which have simple closed form solutions, give close agreement to those for a finite region. Thermocline thickness is obtained in closed form and shows proportional behavior to the square root of time and inverse proportional behavior to the square root of flow rate.

• 한국농공학회지
• /
• 제42권3호
• /
• pp.45-55
• /
• 2000

This study was carried out to derive optimal design low flows bythe Weibull-3 and Wakeby distributions for the partial consecutive duration series at seven watersheds along Han. nagdong, Geum Yeongsan and Seomjin river systems. L-coefficient of variation L-skewness and L-kurtosis were calculated by the L-moment ratio respectively. Parameters were estimated by the method of L-Moments with consecutive duration. Design low flows obtained by method of L-Moments using with consecutive duration, Design low flows obtained by method of L-Moments using different methods for plotting positions formulas in the Weibull-3 and Wakeby distributions were compared by the Root Mean Square Errors(RMSE). It has shown that design low flows derived by the method of L-moments using Weivull plotting position formula in Wakeby distribution were much closer to those of the observed data in comparison with those obtained by the methods of L-moments with the different formulas for plotting positions in Weibull-3 distribution from the viewpoint of Root Mean Square Errors.

• 한국농공학회지
• /
• 제41권4호
• /
• pp.25-29
• /
• 1999

This study was conducted to derive optimal design floods by Gerneralized Extreme Value(GEV) and Weibull-3 distributions for the annual maximum series at ten watersheds along Han,Nagdong, Geum, Yeongsan and Seomjin reiver systems. Adequency for the analysis of flood data used in this study was established by the tests of Independence. Homogeneity , detection of Outlines, L-moments. Design flood sobtaine dby /methods of Moments and L-Moments using different methods for plotting positions in BEV and Weibull-3 distributions were compared by the Relative Mean Errors(RME) and Root MEan Square Errors(RMSE). The result wa found that design floods derived by the L-moments using the other formulas for plotting positions from the viewpoint of Relative Mean Errors and Root Mean Square Errors.

• Journal of Positioning, Navigation, and Timing
• /
• 제3권4호
• /
• pp.149-154
• /
• 2014

The BeiDou is a satellite-based positioning and navigation system, which is under construction by the China Satellite Navigation Office. Until the June of 2014, the constellation of BeiDou navigation satellite system consists of 14 satellites including five geostationary earth orbit (GEO), five inclined geosynchronous earth orbit (IGSO) and four medium earth orbit (MEO). In this paper, we present the positioning results using BeiDou B1 code measurements obtained from three GNSS reference stations (BHAO, SKMA, MKPO). Combined Beidou/GPS positioning results are also compared to BeiDou and GPS only. BeiDou-only positioning errors for the east-west and north-south direction had less than 2 meter with root mean square (RMS) value. However, the positioning error for the up-down direction had larger than 10 meter at a 95% confidence level. Our results also suggest that the position precision is improved by combined BeiDou/GPS compared to BeiDou-only.