• Wind and Structures
• /
• v.17 no.3
• /
• pp.245-262
• /
• 2013

The flow interaction between two identical neighboring twin square prisms in a staggered arrangement in an open terrain was investigated experimentally. The downwind prism was mounted on a rigid-aeroelastic setup in an open-terrain boundary layer flow to measure its acrosswind root-mean-square responses and aerodynamic damping ratios. By varying the relative location of the upwind prism and the Scruton number associated with the downwind prism, the acrosswind aeroelastic behavior of the downwind prism was analyzed and compared to that of an isolated one. Results showed that the acrosswind root-mean-square response of the downwind prism could be either suppressed or enhanced by the wake flow produced by the neighboring upwind prism. Besides the assessment of the wake effect of the downwind prism, finally, regressed relationships were presented to describe the variation of the aerodynamic damping ratio so as to predict its acrosswind fluctuating response numerically.

• The Journal of the Acoustical Society of Korea
• /
• v.22 no.3
• /
• pp.224-232
• /
• 2003

In this paper, efficient deployment method of sensors and target positioning performance with respect to measurement error are dealt with. Active sonar can be categorized into Monostatic, Bistatic, Multistatic sonar, and characteristics of respective sonar are different. Assuming that each sensor can receive range and angular information, we compare the performance of Monostatic, Bistatic, and Multistatic systems. And we suggest Weighted least square (WLS) which gives the weight to former case, LS. In particular. adopting suggested method we investigate the target positioning performance according to number of sensor, distance from transmitter to receiver, and propose efficient arrangement rule for Multistatic sonar configurations. According to the experimental results, RMSE of Multistatic sonar is found to be superior to Monostatic and Bistatic by 35.98%. 37.45% respectively, and WLS is superior to LS approximately by 7.4% in average. Furthermore, as the difference of respective sensor's variance is large, it is observed that the improvement ratio of target positioning performance is increased.

• Communications of Mathematical Education
• /
• v.24 no.1
• /
• pp.195-220
• /
• 2010

The magic square is one of the number arrangements and the sums of each row, column, and diagonal are all equal. The meaning of "方" is "Square". If we don't consider the condition of 'square' then is it possible any number arrangement? There are many special number arrangements such as "magic five number circle(緊五圖)", "magic six number circle(聚六圖)", "magic eight number circle(聚八圖)", "magic nine number circle(攢九圖)", "magic eight camp circle(八陣圖)", "magic nine camp circle(連環圖)" in the ancient Chinese mathematics books such as "楊輝算法", "算法統宗". Also, there is a very special and beautiful number arrangement Jisuguimoondo(地數龜文圖) in the mathematics book "Goosuryak(九數略)" written by Choi suk jung(崔錫鼎) in the Joseon Dynasty. In this study, we introduce a various number arrangements and their properties.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.1821-1826
• /
• 2003

In this study, we discuss CIP method, which can treat compressible/incompressible problem and multi-phase problem. We can apply this method to the general equations by using CCUP. In this paper, non-staggered grid arrangement and predictor-corrector method are used to enhance later development and the solution accuracy and convergence performance. To validate the numerical algorithm proposed in this paper, the two-dimensional unsteady flow in the driven cavity is simulated. The numerical results of this subject using the present algorithm are compared with other numerical results. As a result, it is prived that the present scheme gives stable and improved solutions, and the results even coarse grid are in good agreement with other result using a fine grid arrangement.

• KIEAE Journal
• /
• v.4 no.3
• /
• pp.195-202
• /
• 2004

This study focuses on the impacts of apartment building arrangements on the outdoor and indoor air quality - the efficiency of natural ventilation in the outside/inside area of an apartment with consideration to the characteristics of an air flow in outside area depending on the types of the arrangements, the main direction of the wind, and the outside wind pressure on the building facade. As indices to evaluate the efficiency of natural ventilation, the concepts of "Age of Air" and "Purging Flow Rate(PFR)" were used in this study. As indices to classify the efficiency of indoor natural ventilation, the mean values of the wind pressure differences between the front and the back elevations of an apartment building were used. The research showed that the PFR of each apartment building arrangement ranges from 0.867 to 3.253. The "minus-shaped" arrangement showed the highest PFR, 2.306; the "zigzag-shaped" arrangement measured 1.889; the "angle-shaped" arrangement measured 1.465, and the "square-shaped" arrangement measured 1.241. Depending on the direction of the wind, the pressure differences range extremely, with variations from 170% to 2300%. Thus, the indoor natural ventilation efficiency can be changed by the pressure differences of the wind, which are sensitive to the main direction of the wind even though the structure and planning of the apartment complexes are the same. Despite the same direction of the wind, even the efficiency can be diverse. This study showed how to predict the most beneficial apartment building arrangement for the profitable natural ventilation efficiency in each direction of the wind.

• Wind and Structures
• /
• v.31 no.6
• /
• pp.495-508
• /
• 2020

To investigate the structural behaviour of grouped tanks under wind loads, 2 problems need to be figured out, wind pressures on tank shells and critical loads of the shell under these pressure distribution patterns. Following the wind tunnel tests described in the companion paper, this paper firstly seeks to obtain wind loads on the external wall in a squarely-arranged cylindrical tank group by numerical simulation, considering various layouts. The outcomes demonstrate that the numerical method can provide similar results on wind pressures and better insights on grouping effects through extracted streamlines. Then, geometrically nonlinear analyses are performed using several selected potentially unfavourable wind pressure distributions. It is found that the critical load is controlled by limit point buckling when the tank is empty while excessive deformations when the tank is full. In particular, significant reductions of wind resistance are found on grouped full tanks compared to the isolated tank, considering both serviceability and ultimate limit state, which should receive special attention if the tank is expected to resist severe wind loads with the increase of liquid level.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.30 no.2
• /
• pp.145-151
• /
• 2017

As an alternative to conventional explosive methods for demolition of concrete structures and rocks, the use of non-explosive demolition agents can be considered to reduce noise, vibration, and dust emissions during the demolition process. In this study, we conduct finite element analysis for crack initiation and propagation caused by the expansion of non-explosive demolition agents in square concrete structures. The predicted crack patterns are compared with the experimental results in the literature. The minimum values of the required expansion pressure of non-explosive demolition agents are also estimated, which depend upon the arrangement of non-explosive demolition agents and empty holes. Furthermore, we investigate the effect of empty holes on the fragmentation of concrete structures, and discuss the effective arrangement of non-explosive demolition agents and empty holes for fragmentation improvement.

• Proceedings of the Korean Society for Emotion and Sensibility Conference
• /
• 2000.04a
• /
• pp.380-384
• /
• 2000

Effectiveness of information conveyance in reading is affected by several factors such as line length, letter size, line spacing arrangement as well as typeface itself. This study examined relative importance of these factors by asking people to read the texts that was constituted with non-square form letter and rank the preference of texts through conjoint analysis. In the case of reading time, justification was the most important factor, followed by leading, line spacing, letter width, line length, font size, font type in their order of importance. And in the case of preference decision, letter width was the most important factor, followed by font size, justification, line spacing, leading, line length, font type. The result will be useful in understanding how to consider human preference in the hangul typography.

• Fashion & Textile Research Journal
• /
• v.6 no.1
• /
• pp.17-22
• /
• 2004

The purpose of this study was to obtain the basic element of patterns, which is the motif, from the existing art works and use it to create and simulate a variety of patterns to show the practical use of the computer. Natural dyed works of geometric shapes like squares and 1/4 of circles, each dyed with a different natural dyes, were produced and motifs were extracted. Then using the 4D box in Adobe Photoshop v.6.0, the developing pattern change and simulation effects when using different patterns and different repetition settings were examined. Observations were made as the motifs were replicated. Different patterns like a diagonal line, a square and a circle appeared. In order to find out the effects according to the changes, the motifs from work's square portions, circle centre, and the composition of eight motifs were extracted and used. The repeated patterns according to the extracted motifs simply showed that in the case of just repeating and arranging, square patterns appeared. By replicating and arranging, the motif and the allophone were matched and patterns with regular lines were formed, like a twill, pointed twill line. By setting the direction to Y and X in the repetition methodes, a typical half-drop arrangement or a brick pattern arrangement were formed according to 1/4, 2/4, 3/4, 1/3, or 2/3 in changes. Also the steepness of the slope changes quickly or in turn slowly as the rhombus shape appears. However in the case of a composed motif, an ogee pattern appeared. Lastly, by 3-D mapping patterns like a slant line, pointed twill patterns, diamond patterns, and the repeat patterns of a motif with a circle and a line combined, and a circle motif, an optical illusion could be observed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.12
• /
• pp.8760-8766
• /
• 2015

In this paper a technology which gives directions to people and also localization of the robotic vacuum cleaners inside some spacious buildings is developed. For this purpose, it is confirmed that which pattern has a small error in dealing with the indoor localization with various RFID tag arrangements attached on the ground. This experiment was conducted by using MT92(900MHz range Antenna) and ALR 9900+(Reader). As a result, the square arrangement has the least error, 21.19cm, among other patterns which are diamond, rectangle and regular hexagon. However, it is necessary to consider the number of tags in the unit area, from this point of view the regular hexagon arrangement is the most efficient arrangement among other patterns because it needs only 6 tags in the unit area.