• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.05a
• /
• pp.266-269
• /
• 2009

Iron-based soft magnetic materials are widely used as cores, such as transformer transformers, motors, and generators. Reducing losses generated from soft magnetic materials of these applications results in improving energy conversion efficiency. Recently, the new P/M soft magnetic material realized an energy loss of 68 W/kg with a drive magnetic flux of 1 T, at a frequency of 1 kHz, rivaling general-purpose electromagnetic steel sheet in the low frequency range of 200 Hz to 1 kHz. In this research, the effect of rolling parameters on soft magnetic properties of Fe-based powder cores was investigated. The Fe-based soft magnetic plates were produced by the hot powder rolling process after both pure Fe and Fe-4%Si powders were canned, evacuated, and sealed in Cu can. The soft magnetic properties such as energy loss and coercive power were measured by B-H curve analyzer. The soft magnetic properties of rolled sheets were measured under conditions of a magnetic flux density of 1 T at a frequency of 200 kHz. It was found that rolling reduction ratio is the most effective parameter on reducing both energy loss and coercivity because of increasing aspect ratio with reduction ratio. By increasing aspect ratio from 1 to 9 through hot rolling of pure Fe powder, a significant loss reduction of one-third that of SPS sample was achieved.

• Asia-Pacific Journal of Business
• /
• v.2 no.1
• /
• pp.91-114
• /
• 2011

The market size of e-Commerce in Japan was 15 trillion Yen in 2006, and B2C Internet shopping sales were over 6.57 trillion in 2009. Lakuten is a representative Internet shopping company whose market share is 45%. Lakuten has over 70,000 online stores and Japanese shoppers trust them based on the fair competition rule and pre-control system on e-commerce. Japanese consumers accept new technology rapidly and highly use Internet and mobile channel. This research analyse online shopping behaviors of Japan, a big e-commerce market. Internet shopping intention, satisfaction, and recommendation by Internet shopping motivations, perceived risks, shopping innovativeness were analyzed. A questionnaire survey of 464 Japanese consumer was performed and ANOVA, factor analysis, reliability test have done by SPSS 12.0. As the results, Internet shopping intentions were higher in groups of olders, higher innovativeness. House wives' satisfaction of Internet shopping is highest. High innovativeness group showed higher internet shopping motivation of economics, connivence, hedonic, and social. Student, women, and low income group perceives high risks to Internet shopping. Implications and further researches were suggested based on the results.

• Nuclear Engineering and Technology
• /
• v.54 no.9
• /
• pp.3250-3259
• /
• 2022

A new approach to the use of rice straw as a difficult-to-recycle agricultural waste was proposed. Potassium aluminosilicate was obtained by spark plasma sintering as an effective material for subsequent immobilization of ¹³⁷Cs into a solid-state matrix. The sorption properties of potassium aluminosilicate to ¹³⁷Cs from aqueous solutions were studied. The effect of the synthesis temperature on the phase composition, microstructure, and rate of cesium leaching from samples obtained at 800-1000 ℃ and a pressure of 25 MPa was investigated. It was shown that the positive dynamics of compaction was characteristic of glass ceramics throughout the sintering. Glass ceramics RS-(K,Cs)AlSi₃O₈ obtained by the SPS method at 1000 ℃ for 5 min was characterized by a high density of ~2.62 g/cm³, Vickers hardness ~ 2.1 GPa, compressive strength ~231.3 MPa and the rate of cesium ions leaching of ~1.37 × 10^-7 g cm^-2·day^-1. The proposed approach makes it possible to safe dispose of rice straw and reduce emissions into the atmosphere of microdisperse amorphous silica, which is formed during its combustion and causes respiratory diseases, including cancer. In addition, the obtained is perspective to solve the problem of recycling long-lived ¹³⁷Cs radionuclides formed during the operation of nuclear power plants into solid-state matrices.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.233-241
• /
• 2022

Purpose: The purpose of this study was to assess the dimensional change of 3D-printed dentures after post-curing. Materials and Methods: The upper and lower dentures were designed in Exocad DentalCAD software and exported as STL files. The upper and lower dentures were printed from 10 STL files using a DLP-type dental 3D printer. The printed upper and lower dentures were cleaned, and a scan file was created using a model scanner before and after post-curing. The dimensional change was evaluated by superimposing the scanned denture files before and after post-curing and measuring the distance between measurement points on the denture. SPSS was used for statistics, and the level of significance was 5%. Results: The maxillary denture reduced in size during post-curing, with the most notable color change occurring in the posterior palatal region. The reduction in anteroposterior maxillary denture length (A-D, A-E, A-F), as well as the distance between the first molars on both sides (B-C), was statistically significant. After post-curing, the mandibular denture showed more noticeable color change in the posteriorly buccal and lingual region. The decrease of length on the posterior (A-M, A-D, A-E, A-L, A-H, A-I, H-I) and lingual (J-K, L-M) sides of the denture were statistically significant. Conclusion: There was significant dimensional change in both the length and width of the 3D-printed maxillary and mandibular dentures after post-curing in this experiment. Consequently, it is seemed necessary to develop post-curing techniques and materials that reduce such denture deformation.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.49 no.5
• /
• pp.1-11
• /
• 2021

The purpose of this study is to find out the main factors affecting air quality in urban physical space factors, and provide clues for environmental improvement. Nine monitoring stations in China's industrial city, Changchun, collected AQI concentration data from January 1, 2018 to December 31, 2019. This paper analyzes the types and distribution characteristics of urban physical facilities within a radius of 300m with the detection station as the center. The monitoring station is divided into three groups, and the difference in floating dust concentration among the three groups in different seasons is analyzed. The results show that AQI concentration is the highest in spring and winter, followed by summer, and the lowest in autumn. The place with the highest concentrations of AQI in spring are F (93.00), D (91.10), I (89.20), in summer are D (69.05), A (67.89), B (84.44), in autumn are I (62.80), G (60.84), D (53.27), D (53.27), in winter are I (95.82), H (95.60), f (94.04). Through SPSS analysis, it shows that the air index in a space with a diameter of 600 meters is related to forest land, grassland, bare land, water space, tree height, building area (average value), and building volume (average value). According to the statistical analysis results of spring and winter with the most serious pollution, forest land area (43,637m², 15.44%) and water surface area (18,736m², 6.63%) accounted for the majority, and group 1 (A, B, C) with the least average building area (448m², 0.17%) and average building volume (10,201m²) had the lowest pollution concentration. On the contrary, group 2 (D, E, F) had the highest AQI concentration, with less or no woodland (1,917m², 0.68%) and water surface area (0m², 0%), and the highest average building area (1,056m², 0.37%) and average building volume (17,470m³). It is confirmed that the characteristics of the area with the highest AQI concentration are that the more the site ratio of tree height above 12m, the smaller the site ratio of bare land, and the lower the pollution degree. On the contrary, the larger the area of bare land, the higher the pollution degree. By analyzing the characteristics of nine monitoring stations in Changchun, it can be seen that the air quality brought by the physical characteristics of urban space is closely related to the above factors.

• Journal of Animal Science and Technology
• /
• v.66 no.2
• /
• pp.326-339
• /
• 2024

This study was conducted to investigate the effects of protease supplementation and different nutrient density of diets in growing-finishing pigs. A total of one hundred-eight crossbred growing pigs ([Landrace × Yorkshire] × Duroc) with an initial body weight (BW; 18.74 ± 3.46 kg) were used for 15 weeks. Pigs were randomly assigned to six dietary treatments with 6 replicates of 3 pigs per pen in a 3 × 2 factorial through the following arrangement: Three groups of protease (1, Basal diets; 2, Protease A: 125 mg/kg protease derived from Streptomyces sps; 3, Protease B: 100 mg/kg protease derived from Bacillus licheniformis) at two different nutrient density diets (1, Basal requirement; 2, 0.94%-0.98% higher than requirement in dietary protein and 50 kcal/kg in energy). High nutrient (HN) diets showed higher average daily gain (ADG) (p < 0.05) and apparent total tract digestibility (ATTD) of crude protein (CP) (p < .0001) compared to basal nutrient (BN) diets during growing periods. Supplementation of protease showed higher BW (p < 0.05) and ADG (p < 0.05) compared to non-supplementation of protease during growing periods. Also, supplementation of protease showed higher ATTD of CP (p < 0.01), ATTD of gross energy (p < 0.05) and decreased blood urea nitrogen (BUN) level (p = 0.001) compared to non-supplementation of protease during finishing periods. Pigs which fed the protease showed decreased ammonia (NH₃) emissions (p < 0.05) during experiment periods and decreased hydrogen sulfide (H₂S) emissions (p < 0.01) during finishing periods. Interactions between nutrient density and protease were observed, which decreased the feed conversion ratio (p < 0.05) in HN diets without protease compared to BN diets without protease during weeks 4 to 6. Also, interaction between nutrient density and protease was observed, which resulted in improved ATTD of CP (p < 0.01) in response to PTA supplementation with HN diets during the finishing period. In conclusion, supplementation of protease reduces NH₃ in feces and BUN in whole blood by increasing the digestibility of CP and improves growth performance. Also, diets with high nutrient density improved growth performance and nutrient digestibility in growing periods.

• Korean Journal of Environmental Biology
• /
• v.23 no.2 s.58
• /
• pp.191-199
• /
• 2005

The community structure, vertical distribution and harpacticoids composition of the meiofauna community were observed from five stations in Marian Cove, King George Island and one station on the northeastern side of Nelson Island. Sample was taken by a free-fall corer in December 2002. Generally, 11 taxa of meiofauna were found, and meiofauna abundance ranged from 322 to 1575 indiv. $10cm^{-2}$ (mean 781 indiv. $10cm^{-2}$). Nematodes were the most dominant group, making up $89\%$ of total meiofauna, followed by harpacticoids $(6.8\%)$. Benthic harpacticoids appeared 19 species of nine families at all the stations, and most various taxa appeared at station B (13 species of seven families). For vertical distribution, more than $70\%$ of meiofauna was concentrated in the upper $0\~2cm$ sediment layers, and the density abruptly decreased with depth in all the stations. Total biomass of meiofauna varied between 41 and $360{\mu}gC\;10cm^{-2}$, and overall mean biomass was $205{\mu}gC\;10cm^{-2}$. Also nematodes had the highest percentage of total maiofauna biomass $(62.4\%)$. The analysis results of Canonical Correspondence Analysis between meiofauna community and sediment grain size showed that polychaets, oligochaets and cumaceans were influenced by silt&cray, and sand, granule and pebble had a influence on harpacticoids, kinorhynchs and ostracods respectively. But nematodes were not affected by sediment grain size.