• 한국환경과학회지
• /
• 제28권12호
• /
• pp.1123-1131
• /
• 2019

In this study, we investigated the spatial range, distribution pattern, temporal appearance, sex ratio, seasonal pattern, and size of the population of Leptalina unicolor locally inhabiting the wetland protection area in the Jaeyaksan Mountain. We found that the butterfly was distributed across four areas at 750 m above sea level and in an area of 96,000 ㎡. in the southeastern slope of the mountain. The discontinuous distribution of the butterflies in the meadow. According to our survey conducted from 2012 to 2014, L. unicolor occurred in May (spring) and July (summer) each year, with the male population more than three times higher than that of the female population. The population size estimated using the mark and recapture method on the back of the hind wing in the two years was as follows: 877±502 and 1243±800 individuals in the spring and summer of 2012, respectively, and 783±429 and 506±365 individuals in the spring and summer of 2014, respectively, suggesting no specific seasonal pattern. The findings of this study are expected to be useful for the conservation of the populations and habitats of L. unicolor, which are currently distributed locally due to a decrease in population size.

• 한국환경과학회지
• /
• 제5권4호
• /
• pp.473-479
• /
• 1996

The temnoral variations of the suspended material concentration (SMC) during spring-neap tidal cycle was investigated at more than 30 stations in Deukryang Bay, Korea, in 1 and 23 July, 1992. The averaged total SMC in spring tide was two times more than those in neap tide. It can be explained that the strong tidal current in spring tide disturbed bottom waters and induced higher SMC in the bay. The areal distributions of SMC for the surface and the bottom layers in the bay shows much different patterns during spring and neap tidal cycle. We concluded that the vertical stratification intensity of water mass is important factor of the horizonatal distribution of SMC in the bay.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.82-84
• /
• 2003

In case contact between point of contacts is not achieved well, contact resistance is grown, and by current concentration at current conducting contacts can weld. In order to decrease contact resistance between contacts in case of busbar, installing spring between fixed contact and moving contact. and then force on faying surface of contacts increase and contact resistance decrease. But, in case increase force of spring to widen contact area, operating force moving contact can grow, on the contrary force of spring is small, contact resistance becomes low. Therefore, need to optimize force and number of spring. position, and also need to examine force change on contact surface at point of contact moving. In this paper, dynamic kinetics analysis for force on faying surface of contacts is performed at unsteady state. It is showed to not uniform force on surface between contacts, and we can got more uniform force by means of change spring position.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 추계학술대회논문집
• /
• pp.220-225
• /
• 2003

Recent issue of optical actuator is applying to mobile device. It leads actuator to become smaller than conventional type. This paper proposes the design of micro actuator plate spring and analysis of its vibration characteristic. Considering natural frequency of spindle motor, 1st and 2nd eigenfrequency of micro actuator must avoid its natural frequency. First, magnetic circuit is designed by using fine pattern coil and magnetic force is acquired by simulation program. Then, concept design is achieved by topology optimization. From concept design, micro actuator plate spring is embodied through DOE(design of experiment). Finally, considering vibration characteristic simultaneously, optimal plate spring design is determined by RSM(response surface method).

• 한국포장학회지
• /
• 제29권2호
• /
• pp.119-128
• /
• 2023

봄배추 저장을 위한 최적의 전처리 및 저장 조건을 확립하고자 봄배추의 적입방향과 예건/예냉 처리 및 HDPE / PVC 필름을 이용한 파렛트 단위의 modified MAP 처리하여 봄배추를 저온저장고에 저장하면서 중량감모율, 정선손실율, 수분함량, 경도, 색도, 가용성고형물함량, 관능검사 등을 비교 분석하였다. 대조구와 비교 시 예건/예냉 및 MA 포장재 처리는 중량감모와 정선손실을 억제시켰는데 이는 전처리 및 포장 처리가 신선도 유지와 탈습 억제에 적절한 영향을 미치는 것으로 생각되었다. 관능검사 결과 대조구의 경우 6주까지 판매가능한 marketable 상태를 유지하나 처리구의 경우 9주까지 5점 이상으로 장기저장이 가능한 것으로 나타났다. 배추 저장 시 선도유지 효과와 작업성 및 경제성을 동시에 고려할 경우 품질에서 미세한 차이가 나타났지만, 적입 방식 측면에서는 정방향으로 적입하는 것이 효율적인 것으로 검토되었다.

• 환경생물
• /
• 제21권4호
• /
• pp.422-427
• /
• 2003

The spatio-temporal distribution of four coexisting acartiid species in two subgenera Acartiura (Acartia hongi and A. omorii) and Odontacartia (A. erythraea and A. pacifica) was examined at seven stations in the southwestern waters of Korea, between January to December 1998. A. hongi occurred dominantly in the northern regions from winter to spring while A. omorii predominated in the southern regions in spring and early summer when the more saline (> 33.0 psu) and high chlorophyll-$\alpha$ concentration water mass appeared. With the increase of temperature (> $20^{\circ}C$), however, both species disappeared and then replaced with A. erythraea and A. pacifica. A. erythraea (rare species), appeared in the middle regions where the high chlorophyll-$\alpha$ concentration ($3{\mu}g\; I^{-1}$) in the summer, while A. pacifica was abundant in all regions through summer and fall. It is suggested that the seasonal succession of the genus Acartia was subgenus-specifically affected by environmental factors such as temperature, salinity and chlorophyll-$\alpha$ concentration.

• 한국환경보건학회지
• /
• 제45권3호
• /
• pp.238-246
• /
• 2019

Objective: The purpose of this study was to investigate the distribution of mineral components, health and taste index for water supply plants, spring water located in northern Gyeonggi area and bottled waters in market to analyze Ca, K, Mg Na, Si, $F^-$ and $SO_4{^{2-}}$. Method: The samples were source and tap water in 15 water supply plants over 9 river basin, 172 spring water and 20 bottled water. The Ca, K, Mg Na and Si were analyzed by ICP-OES. The $F^-$ and $SO_4{^{2-}}$ were determined by Ion Chromatograph. Then, taste and health index were calculated using Hashimoto equation. Results: The average concentration of major minerals showed in same order of Ca > Na > Mg > K for all kinds of drinking water from water supply plants, spring waters and bottled waters. Total concentration of major minerals (Ca, K, Mg, Na) was calculated that showed 26.79 mg/L of tap water, 21.81 mg/L of spring water, 32.94 mg/L of bottled water on average. So, the spring waters indicated the lowest minerals sum. The tap water from water supply plants was categorized to Group I, II for 33.3, 44.4% according to K-index and O-index. Otherwise, spring water was classified as Group I, II for 44.0, 46.3%. Conclusion: According to the results of K and O-index, water from water supply plant showed higher K-index which means good for the health. Otherwise, spring water indicated higher O-index that people can feel more delicious than tap water. Futhermore, the mineral distribution of source water from water supply plants and spring water had indicated high correlation with geological effect.

• 한국환경과학회지
• /
• 제12권6호
• /
• pp.677-688
• /
• 2003

The purpose of this study was to predict occurrence of earthquakes in Korea by measuring the concentration of radon radioactivity in the air and in the underground water. Two monitoring systems of radon concentration detection in the air were installed in Seoul, East Coast area, whereas of radon concentration in the underground water in Kyungju area during December, 1999 to June, 2001. The distribution of radon concentration in the air in Seoul is as follows Winter(10.10 $\pm$ 2.81 Bq/㎥), autumn(8.41 $\pm$ 1.35 Bq/㎥), summer(5.83 $\pm$ 0.05 Bq/㎥) and spring (5.34 $\pm$ 0.44 Bq/㎥), whereas the distribution of radon in the air in the East Coast area showed some difference as follows : autumn (14.08 $\pm$ 5.75 Bq/㎥), Summer (12.04 $\pm$ 0.53 Bq/㎥), Winter (12.02 $\pm$ 1.40 Bq/㎥) and spring (8.93 $\pm$ 0.91 Bq/㎥). In the meanwhile, the distribution of radon in the water is as follows : spring (123.59 $\pm$ 16.36count/10min), Winter (93.95 $\pm$ 79.69counter/10min), autumn (68.96 $\pm$ 37.53counter/10min) and spring (34.45 $\pm$ 9.69counter/10min). The daily range of the density of radon concentration in Seoul and East Coast area was between 5.51 Bq/㎥ - 9.44 Bq/㎥, 7.15 Bq/㎥ - 15.27 Bq/㎥, respectively. Correlation of the distributions of radon concentrations in the air and in underground water with earthquake showed considerable variations of radon concentration before the occurrence of the earthquake. The results suggested that radon radioactivity seemed to be helpful for the prediction of the occurrence of earthquake.

• 수산해양기술연구
• /
• 제52권1호
• /
• pp.48-55
• /
• 2016

The species composition and distribution of catches by dredge gear in the Yeongil Bay, Korea were investigated on a seasonal basis from February to November, 2015. Total catches consisted of 44 species and 35 families. They were 13 species of fish, 10 species of crustacea, 5 species of echinodermata, 5 species of gastropoda, 4 species of cephalopoda and 3 species of bivalvia. Major catch species was shellfish and had seasonal variations in catch. In spring and winter, the catch of ark shell (Scapharca broughtonii) was increased. Adversely, the catch of admas venus clam (Callithaca adamsi) increased in sunmmer and autumn. Species diversity indices was high as the value of 1.99 in spring, and low to the value of 0.34 in summer. In addition, multi dimentional scaling (MDS) indices also was high in spring as the value of 1.99. In summer, the index was low as the value of 0.34. Similarity analysis based on species data was transformed by fourth root. With the result of cluster analysis and MDS analysis, species was divided into two groups. The first group as Group A consists of winter and spring species and another was Group B made of species in summer and winter.

• 구강회복응용과학지
• /
• 제17권4호
• /
• pp.283-305
• /
• 2001

The purpose of this study was to analyze the stress distribution of condylar regions and edentulous mandible with implant-supported cantilever prostheses on the certain conditions, such as amount of load, location of load, direction of load, fixation or non-fixation on the condylar regions. Three dimensional finite element analysis was used for this study. FEM model was created by using commercial software, ANSYS(Swanson, Inc., U.S.A.). Fixed model which was fixed on the condylar regions was modeled with 74323 elements and 15387 nodes and spring model which was sprung on the condylar regions was modeled with 75020 elements and 15887 nodes. Six Br${\aa}$nemark implants with 3.75 mm diameter and 13 mm length were incorporated in the models. The placement was 4.4 mm from the midline for the first implant; the other two in each quardrant were 6.5 mm apart. The stress distribution on each model through the designed mandible was evaluated under 500N vertical load, 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. The load points were at 0 mm, 10 mm, 20 mm along the cantilever prostheses from the center of the distal fixture. The results were as follows; 1. The stress distribution of condylar regions between two models showed conspicuous differences. Fixed model showed conspicuous stress concentration on the condylar regions than spring model under vertical load only. On the other hand, spring model showed conspicuous stress concentration on the condylar regions than fixed model under 250N horizontal load linguobuccally, buccal 20 degree 250N oblique load and buccal 45 degree 250N oblique load. 2. Fixed model showed stress concentration on the posterior and mesial side of working and balancing condylar necks but spring model showed stress concentration on the posterior and mesial side of working condylar neck and the posterior and lateral side of balancing condylar neck under vertical load. 3. Fixed model showed stress concentration on the posterior and lateral side of working condylar neck and the anterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior sides of working and balancing condylar necks under horizontal load linguobuccally. 4. Fixed model showed stress concentration on the posterior side of working condylar neck and the posterior and lateral side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 20 degree oblique load. 5. Fixed model showed stress concentration on the anterior and lateral side of working condylar neck and the posterior and mesial side of balancing condylar neck but spring model showed stress concentration on the anterior side of working condylar neck and the anterior and lateral side of balancing condylar neck under buccal 45 degree oblique load.. 6. The stress distribution of bone around implants between two models revealed difference slightly. In general, magnitude of Von Mises stress was the greatest at the bone around the most distal implant and the progressive decrease more and more mesially. Under vertical load, the stress values were similar between implant neck and superstructure vertically, besides the greatest on the distal side horizontally. 7. Under horizontal load linguobuccally, buccal 20 degree oblique load and buccal 45 degree oblique load, the stress values were the greatest on the implant neck vertically, and great on the labial and lingual sides horizontally. After all, it was considered that spring model was an indispensable condition for the comprehension of the stress distributions of condylar regions.