• 한국지진공학회논문집
• /
• 제15권2호
• /
• pp.61-69
• /
• 2011

이 논문에서는 근래에 널리 사용되는 면진 장치인 폴리우레탄 스프링 복원형 디스크 받침의 동적거동에 영향을 미치는 구성재료의 인자에 대한 분석을 수행한 후, 그 결과를 이용하여 받침의 거동을 예측하여 거동 시험결과와 비교하였다. 여기서 동적거동에 영향을 미치는 인자로는 속도와 접촉압력에 따라 변하는 불소수지판(PTFE, PolyTetraFluoroEthylene, 폴리테트라플루오로에틸렌)의 마찰계수와 변형률에 따라 변화하는 폴리우레탄 스프링의 탄성계수가 고려되었다. 불소수지판은 W-PTFE virgin 제품을 사용하였고, 폴리우레탄 스프링은 직접 제작한 것을 사용하였다. 접촉압력, 속도에 따른 마찰계수 변화와 변형률에 따라 변하는 폴리우레탄 스프링의 탄성계수를 모사하는 식은 각각의 시험결과로부터 역추정 하여 사용하였다. 동특성 영향인자를 고려한 거동의 예측 결과는 동특성이 고려되지 않고 정적 인자만을 고려한 예측 결과보다 시험결과와 더 적절한 일치성을 보여주었다.

• 동력기계공학회지
• /
• 제14권6호
• /
• pp.35-40
• /
• 2010

This article deals with the numerical analysis results of stiffness of diaphragm spring used in the clutch of a manual transmission. In order to investigate the relationship of the force and displacement in a diaphragm spring, we have established a numerical model of diaphragm spring using a well-known analytic model of Belleville spring and a cantilever beam model for the finger part of diaphragm spring. Using the stress and strain relations of Belleville spring and cantilever beam, we propose the analytic equation of motion of diaphragm spring for the use of a clutch automated actuator in an automated manual transmission. The proposed analytic model represents the typical dynamic characteristics of diaphragm spring along with the release bearing travel. And it is characterized in a closed-form equation, therefore it can be used for the further study of development of actuator and control law of clutch automating mechanism.

• 한국정밀공학회지
• /
• 제19권3호
• /
• pp.95-100
• /
• 2002

Built-in Eccentric Bearing-Torsional Spring (BEBTS) type Automatic Belt Tension Unit (ABTU) is one of typical belt tension units. The BEBTS type ABTU system frequently experiences torsional vibration about its pivot due to the variation of belt tension. However, it is very difficult to analyze the rotational (or torsional) vibration of the ABTU because the exciting moment varies according to the change of belt tension. To get over this difficulty, in this paper. the ABTU was simplified as 1-DOF translational motion model in the tangential direction. Its equation of motion was derived and solved. The time history and frequency responses were computed and examined for three of BEBTS type ABTUs which are made by different manufacturers but the tame kind.

• 한국융합학회논문지
• /
• 제11권11호
• /
• pp.239-247
• /
• 2020

본 연구는 풍력발전기용 베어링의 응력저감을 위한 설계와 검증에 관한 것이다. 일반적인 4점 접촉 볼베어링의 구조를 가지고 있는 슬루잉 베어링은 큰 모멘트 하중이 작용하면 접촉점이 레이스웨이 끝단부로 이동하여 국부적인 응력상승 문제가 발생한다. 본 연구에서는 이러한 접점 이동을 줄이기 위한 베어링을 설계하였다. 전통적인 볼베어링과 새로인 설계된 베어링의 극한하중 하에서의 변형거동을 볼을 스프링요소로 치환하여 유한요소해석을 통하여 계산하였다. 볼과 레이스웨이의 접촉응력은 변형거동 해석결과를 경계조건으로 입력하여 유한요소해석으로 계산하였다. 베어링 구조에 따른 접촉부 응력 비교를 통하여 베어링의 응력해석 방법의 효용성을 검증하였다.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 2002년도 제35회 춘계학술대회
• /
• pp.185-192
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as lumped mass system supported by spring and damper. Front the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented mode and results will be very helpful to design the optimal camshaft and valve train system.

• 한국자동차공학회논문집
• /
• 제10권6호
• /
• pp.34-43
• /
• 2002

This paper focused on the dynamic behavior of camshaft in a direct acting type valve train system. To investigate camshaft behavior, transient vibration analysis is performed by using the transfer matrix method. The camshaft is treated as a lumped mass system supported by spring and damper, From the presented analytical model, we could predict dynamic behavior of camshaft, shaft locus within bearing and bearing load. The presented model and results will be very helpful to design the optimal camshaft and valve train system.

• 한국자동차공학회논문집
• /
• 제6권3호
• /
• pp.78-87
• /
• 1998

A dynamic model of direct-acting OHC valve train system has been used to determine the load conditions in the system. The modified equations for calculating the friction forces between cam and HLA, and at a camshaft bearing have been defined considering the lubrication conditions. Then, to understand the frictional characteristics in the system, a parameter study has been performed. As the results of the analysis, valve spring stiffness and preload have great effects on the friction in the system, but the effects of other parameters are negligible. So, how to design the valve train system with respect to the reduction of friction is to minimize the valve spring stiffness and preload in the limit of satisfying the dynamic constraints.

• 소성∙가공
• /
• 제11권7호
• /
• pp.620-627
• /
• 2002

The purpose of this paper is the development of an automated measurement system for micro spring based on the digital image processing technique. This micro spring can be used in various engineering applications such as filament, load bearing springs, hard disk suspension and many others. Main functionality of the micro spring inspection system is to measure the representative pitch of the micro spring. The derivative operators are used for edge detection in gray level image. Measurement system developed in this paper consisted of new auto feeding mechanism to take advantage of air pressure. In the process of development of the micro spring inspection system based on the image processing and analysis, strong background technology and know-how have been accumulated to measure micro mechanical parts.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.23-29
• /
• 2001

Cylindrical type of self-controlled restrictor are designed for hydrostatic bearing of grinding wheel spindle. Typical hydrostatic journal bearing with the designed restrictor is analytically model. According to the model, the affect of oper-ation parameters, such as, initial cross distance, supply pressure, diameter of two supply holes, pre-load of spring, and clearance between spindle and housing, on bearing stiffness are analyzed. From the results of the analysis, the optimum conditions of operation parameters that maximize the bearing stiffness are estimated.

• 한국소음진동공학회논문집
• /
• 제14권11호
• /
• pp.1059-1065
• /
• 2004

In this paper, the dynamic characteristic analysis of carriage structure supported by air bearings were performed. Toward this end, the characteristics of air bearing were numerically analyzed to estimate the stiffness of the air bearing and the clearance between air bearing and guide surface. The modal analysis of the carriage structure was performed by using finite element method, and the experimental modal analysis was also performed to validate the finite element model, where rigid body modes were compared to validate the stiffness of the air bearings. From the results, the air spring stiffness can be estimated within the range of acceptable accuracy under any pressure and clearance condition.