• Korean Journal of Organic Agriculture
• /
• v.19 no.1
• /
• pp.121-134
• /
• 2011

For this study, Smilex powder, a pesticide, was sprayed on the Altari radish, and then underground water, Chitosan solution (${\times}$500), and wood vinegar solution (${\times}$1000) were evenly sprayed on the Altari radish respectively. Samples of Altari radishs for residual pesticide analysis were taken two hours, 1 day, 7 days, and 15 days after treatments, and the detectable concentration and degradability of procymidone, the pesticide residue, were measured. The results obtained are as follows: 1. When detectable concentration of procymidone within the altari radish was measured, treatment plots sprayed with underground water, Chitosan solution (${\times}$500), and wood vinegar solution (${\times}$1000) were found to show lower detectable concentration than the non-treatment plot which was sprayed with pesticide only. Especially, the treatment plots sprayed with Chitosan solution (${\times}$500), and with wood vinegar solution (${\times}$1,000) showed lower values than the average. 2. When the degradability of procymidone within the Altari radish was measured, the plot treated with Chitosan solution (${\times}$500) and the plot treated with wood vinegar solution (${\times}$1,000) were found to have relatively higher degradability of procymidone. There were not much differences among testing materials in the degradability of residual pesticides. However, the plot treated with Chitosan solution (${\times}$500) showed higher degradability. In terms of average degradability with time, degradability increased sharply 7 days after the foliar application of testing materials. 3. When the daily far-sighted view survey was conducted in order to find out growth disorder and damage on the Altari radish plants by the treatment of un-derground water, Chitosan solution (${\times}$500), and wood vinegar solution (${\times}$1,000), no symptomatic physiological disorders was observed on all the plants tested during the whole growing season at the tested concentration level.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.46-46
• /
• 2019

The experiments were performed in the Jinan (elevation: 300 meters above sea level), Jeollabuk-do. Seedlings (n = 63 per $3.3m^2$) of ginseng cultivar (Cheonpung, Yeonpung) were planted on April 10, 2015. Shading material of plastic film house was blue-white film. Before the Planting seedling, silicate (3 kg/10 a) or chitosan (40 kg/10 a) was fertilized and foliar sprayed on the leaves 1000 times dilution solution once a month from May to September every year. The growth results of 5-year old ginseng surveyed in 2018 are as follows. The average air temperature in the plastic film house was the highest at $26.6^{\circ}C$ and $26.5^{\circ}C$ in July and August, respectively, and the highest temperature was $40.5^{\circ}C$ in July. The maximum daily temperature of $35^{\circ}C$ or more was 30 days, with the average soil temperature being $24.9^{\circ}C$ in August. The chemical properties of the test soil are as follows. pH was 6.4~6.9 level and EC was 0.35~0.46 dS/m. The organic matter content was 33.5~41.4 g/kg, and available-P content was 251.9~306.8 mg/kg. Exchangeable cations contents, such as K, Ca and Mg were all the appropriate ranges. The soil microbial density surveyed by the dilution plate method was 10~50 times higher than that of control (Non-treatment) and actinomycete density was 3~6 times higher. Pathogens of the genus Fusarium by Metagenome analysis decreased 91.3% and 68.2% respectively in the foliar sprayed of chitosan and soluble-silicate. The light intensity (PAR) in the blue-white film plastic film house gradually increased until July and then decereased, with the average of light intensity in March-October was $120.3umol/m^2/s$. The growth of aerial parts such as plant height and stem length was better than non-sprayed group in silicate or chitosan treatments and Yeonpung cultivar was superior to the Cheonpung cultivar. The SPAD value was higher in Yeonpung cultivar foliar sprayed with soluble-silicate. The growth of underground parts such as root length and taproot length were better in chitosan and soluble-silicate treatment than control, especially in Yeonpung cultivar foliar sprayed with chitosan was good in taproot length and taproot diameter, and fresh weight of root was 60.1 g. Ginsenoside contents were 24.9 mg/g and 22.4 mg/g, in the Cheonpung cultivar foliar sprayed with soluble-silicate or chitosan respectively, 28% and 15% higher than control (19.5 mg/g). The incidence of disease by Alteraria panax and Botrytis cinerea was 3~9% and 4~9%, respectively. High temperature damage rate was 3~5%.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.15 no.4
• /
• pp.3147-3152
• /
• 1973

The factors to influence the travelling distance of sprayed particles for the medium range nozzle may by the groove depth of swirl plate, the cap slope, the diameter of cap hole, and pressure. 1. This study was conducted to examine Interaction effects among four factors to the travelling distance. The results of this study are summarized as followa; a) Interaction effects among four factors the groove depth(G), cap slope(C), diameter of cap hole(D), and pressure (P), were significant to influence the travelling distance except for $G{\times}P,\;C{\times}D{\times}P\;and\;G{\times}C{\times}D{\times}P$. b) Interaction effects with the pressure were very smaller than interaction effects among the other factors. c) Effect of change of the groove depth of swirl plate on the travelling distance of sprayed particles was generally a linear, the increasing rate of the change was about 0.345, which was very significant. d) Effect of change of cap slope on the travelling distance was generally a linear or a dull quadratic, the increasing rate was very small. e) Main effect of change of cap slope in the medium range nozzle was very smaller than that of the close range nozzle on the travelling distance, which was estimated by the changing of turning radius of flowing course in nozzle. f) Interaction effect between two factors in the medium range nozzle was more significant than that of the close range nozzle on the travelling distance.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.23 no.3
• /
• pp.311-319
• /
• 1999

The thermal conductivity ${\lambda}_b$, thermal diffusivity ${\alpha}_b$ of the thin black paint layer sprayed on solid surface and absorptivity a for laser beam are measured by applying a non-contact measurement method of the thermophysical properties of solids. The values of a=0.67, ${\lambda}_b=1.45W/mK$ and ${\alpha}_b=1.24{\times}10^{-6}m^2/s$ are obtained for the sprayed lay~ thickness $z_b{\fallingdotseq}40\;{\mu}m$. Furthermore, for the $z_b{\fallingdotseq}24\;{\mu}m$ thick layers which arc formed by rubbing with a glass rod after spraying, the values of a=0.73, ${\lambda}_b=1.85W/mK$. and ${\alpha}_b=1.09{\times}10^{-6}m^2/s$ are obtained. It is also shown that the present thermal diffusivity ${\alpha}_b$ for $z_b{\fallingdotseq}40\;{\mu}m$ Is about 30~80% larger than those obtained by Araki et al. for the thicker layer $z_b{\fallingdotseq}150{\sim}248\;{\mu}m$. This method could be applied to the measurement of thermophysical properties of thin layer on solids.

• Research in Plant Disease
• /
• v.7 no.1
• /
• pp.37-41
• /
• 2001

This experiment was carried out to investigate the prevention of bacterial shot hole by Bordeaux mixture when it was sprayed on peach trees after harvest. bordeaux mixture was sprayed on \`Mibaeko\` peach trees 1 to 3 times after mid September, and the occurrence of bacterial shot hole was examined in the next year. Bacterial shot hole in leaves appeared from mid May and thereafter increased gradually. The more times was sprayed Bordeaux mixture, the less peaches were diseased with bacterial shot hole. At the beginning of August, the peach harvest time, the disease incidence of the untreated control plot was 27.4 to 38.1%, while the disease incidence was 9.7 to 31.8% when Bordeaux mixture was sprayed. The control value ranged from 16.5 to 64.6%. Occurrence of the fruit disease was similar to that of the leaf disease. Incidence of the fruit disease in the untreated control was 17.2 to 21.6%, but incase of the chemical treatment, it was 5.0 to 12.2 %, showing 41.9 to 70.9% of the control value. Chemical injury on peach leaves were not found in the 4-12 and 408 types, but occurred in some degrees in the 6-6 type of Bordeaux mixture.

• Journal of Animal Environmental Science
• /
• v.19 no.1
• /
• pp.19-24
• /
• 2013

This study is to promote domestic environmentally appropriately conditions for the range 60~70 m, the development of the small and medium-sized sprayer ability measurement that can be used as a general-purpose paddy fields, orchards, and not consolidated areas. The sprayer designed and manufactured that can spraying effectively distance to within 60~70 m. Distribution of sprayed pesticides were obtained and analyzed by measuring the weight. Performance analysed using the buckets were placed horizontally 12.5 m, 70 m vertical intervals by $5m{\times}2.5m$, so total 68 buckets were placed. Total amounts of sprayed quantity was $2,000{\ell}$ and maximum spray distance was about 70 m. Reasonably sprayed region was 5 m~10 m vertically symmetrical. Showed a lot of spraying water in 5 m~40 m distance, and in 45~60 m tended to spraying water decreased slightly. Maximum spraying distance was 70 m.

• Journal of Ocean Engineering and Technology
• /
• v.15 no.3
• /
• pp.69-74
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4.5wt.%Al and titanium dioxide powder $TiO_2$. These powders were coated on a carbon steel S45C by plasma spray method. The result solution was a 5% NaCl and the slat spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Proceedings of the Korea Committee for Ocean Resources and Engineering Conference
• /
• 2001.05a
• /
• pp.344-349
• /
• 2001

This paper was to investigate of a adhesiveness for the plasma sprayed coating materials did salt spray by acoustic emission method in tensile loadings. The powders used for the coating were nickel aluminum composite powder Ni-4,5wt.%Al and titanium dioxide powder Ti02. These powders were coated on a carbon steel S45C by plasma spray method. The salt solution was a 5% NaCl and the salt spray times were 2, 5 and 10 hours respectively. The salt solution penetrated into the surface of the substrate through pore of the coating layer built in the process of plasma spay. Corrosion productions formed on the surface of substrate. The adhesiveness between the substrate and the coating layer is weaken by corrosion and the exfoliation initiated chiefly at the corrosion surface of the substrate. The AE events and energy of the corroded coating specimens decreased as the salt spray times increased.

• Korean journal of applied entomology
• /
• v.41 no.1
• /
• pp.67-73
• /
• 2002

Studies were conducted to investigate the control effects of several insecticides on Apolygus(=Lygocoris) spinolae(Meyer-Dur) and to develop its management strategies in grapevine yards. Of insecticides which were applied by farmers in commercial grapevine yards, chlorpyrifos, parathion, fenvalerate, and esfenvalerate$.$fenitrothion showed good control effects against A. spinolae. In designed field experiments of fenitrothion and chlorpyrifos for the evaluation of A. spinolae control, both insecticides showed high control efficacy of 94.8 and 91.6%, respectively. The damage of A. spinolae was examined in a grapevine yard, where five different combinations of application timing and number were treated with fenitrothion to assess yield losses (average cluster weight) by A. spinolae. There were no significant differences among average cluster weights of sprayed vines; 466.0 g in sprayed vines on 2 to 3 leaves unfolded stage, 460.7g in sprayed vines on flower separating stage, 465.0 g in sprayed vines each on 2 to 3 leaves unfolded and flowers separating stage, and 487.4 g in sprayed vines each on 2 to 3 leaves unfolded, flowers separating and fruit set stage. Weights of fruit clusters of unsprayed vines was significantly lower than those of sprayed vines. Based on yield and spray cost, chemical control on 2 to 3 leaves unfolded stage produced higher net income than each spray on 2 to 3 leaves unfolded and flower separating stage (i.e., two times of spray), and produced similar net income as each spray on 2 to 3 leaves unfolded, flowers separating and fruit set stage (i.e., three times of spray). Thus, the 2 to 3 leaves unfolded stage was economical spray timing to controlA. spinolae in grapevine yards. Also, management strategies for A. spinolae were discussed.

• Korean journal of applied entomology
• /
• v.29 no.3
• /
• pp.184-189
• /
• 1990

A nuclear polyhedrosis virus (NPV) of the tobacco cutworm, Spodoptera litura would be a promisible agent for the control of the insect. To develop a viral insecticide using S. litura NPV, effect of spray on soybean leaves, temperature, storage, an sunlight on the pathogenicity of the virus were studies as follows: Median lethal concentration ($LC_{50}$) of the virus sprayed on the leaves against the third and the fifth instar larvae were $1.301\times10^{4 PIBS}/ml$ and $1.087\times10^{5 PIBS}/ml$, respectively. On the concentration of $1.0\times10^{5 PIBS}/ml$, median lethal times ($LT_{50}$) were 7.3 days for the 3rd and 8.9 days for the 5th instar larvae. Stability of S. litura NPV was quickly decreased at the higher temperate than $60^{\circ}C$ and at the longer exposure to the higher temperature. Storage of the virus at $-20^{\circ}C$ was kept higher pathogenicity than $4^{\circ}C$ and $25^{\circ}C$. Viral activity was maintained more than 10 days in the sprayed-under leaves, but decreased at 3 day after spray in th sprayed-on the leaf surface when exposed the virus to sunlight.