• Journal of Korean Orthopaedic Sports Medicine
• /
• v.1 no.2
• /
• pp.109-114
• /
• 2002

The types of Alpine ski injuries have changed through the years in relationship to the development of skiing equipment. Modern skis, boots and bindings are better at protecting the tibia, which previously was almost as commonly injured as the knee. Since the 1980s, severe knee sprains, most of them involving the anterior cruciate ligament have tripled while injuries of the lower extremity below the knee diminished significantly. However, recent studies show no further improvements in either lower leg fractures or increase in the rates of ACL sprains has occurred. The use of carving skis presents an increased risk for sustaining isolated ACL injuries in more skilled skiers and less skilled skiers are more likely to sustain an ankle fracture than skiers using conventional skis. To restore the trend of diminishing lower leg injury rates, efforts will be needed to motivate skiers to have their equipment serviced by ski shop professionals following ASTM (American Society for Testing and Material) standard procedures. As of now, there are no boots, bindings or skis on the market designed to protect skiers from the ACL injury. The only method proven to reduce ACL injury Is a training program based on recognizing the circumstances that lead to ACL injury in skiing and to avoid these events.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.5 no.1
• /
• pp.75-80
• /
• 1999

The Taekwondo being a martial sports, there are higher chances for the injury to occur than the non martial sports. Therefore, this study analyze the frequency, the area, the type, and the condition of the injury which are prone to occur in the Taekwondo matches; it is to help the Taekwondo players in prevention of the injury and in treatment. The subjects of this study were the 48 players (male 24, female 24) who participated in the final selection contest of the national team player on March 9 to 12, 1993. The data of the injury were obtained from the medical recoder staff and were analyzed to the frequency of the injury per match, the vulnerable area of the injury, the type of injury, and the condition of the injury with a gender difference. There were 24 matches for the male and 24 matches for the female, total 48 matches. Therefore, the total participation number of the players are the double of the match number. 1. The frequency of the injury per match was 18.3%(11/60) for male and 23.1%(12/52) for women. 2. The areas of the injury were ankle 36.4%(4), foot 18.2%(2), knee 18.2%(2), lower leg 18.2%(2), wrist 9.1%(1) in male; foot 33.4%(4), ankle 16.7%(2), knee 16.7%(2), lower back 16.7%(2), lower leg 8.3%(1), face 8.3%(1) in female. 3. The types of the injury were contusion 45.5%(5), sprain 27.3%(3), abrasion 9.1%(1), laceration 9.1%(1), tendon rupture 9.1%(1) in male; contusion 33.3%(4), sprain 33.3%(4), abrasion 16.7%(2), subcutaneous hemorrhage 8.3%(1), dislocation 8.3%(1) in female. 4. The condition of the injury were the unblocked attack 36.4%(4), attacking kick 27.3%(3), blocking a kick 18.2%(2), attacking punch 9.1%, impact with surface 9.1%(1) in male; attacking kick 33.3%(4), unblocked attack 25%(3), blocking a kick 25%(3), attacking punch 8.3%(1), impact with surface 8.3%(1) in female. This study shows that the injury from the Taekwondo matches occurred most in the lower extremity joints and the foot, and shows that the most of the injury types were contusion and sprain. Therefore, it is believed to be helpful to wear the proper fitting ankle or the knee protector and using other protective equipment to prevent the sports injury in the Taekwondo matches.

• Journal of the Korean Applied Science and Technology
• /
• v.40 no.2
• /
• pp.342-347
• /
• 2023

The purpose of this study was to determine the comparison of upper arm, trunk and core muscle activities according to different performance in high Plank exercise using weightless exercise equipment. Six males(age, 23.00±0.73 years; height, 172.95±2.05 cm; body mass, 66.83±2.75 kg; and BMI, 22.33±0.72 kg/m²) completed this study as the subjects. Four type's high Plank exercises using weightless exercise equipment were performed(high plank, HP; high plank with air walker, HPAW; high plank with surf board, HPSB; high plank with waist trainer, HPWT). For the EMG analysis, we measured the body muscle activities of right side on the deltoid(DT), triceps brachii(TB), latissimus dorsi(LD), and external oblique(EO). This research's results were as follows. DT, TB, LD, & EO muscle activities were greatest during HPSB(p=.000). Therefore, these results are expected to serve as basic data for high Plank exercise using weightless exercise equipment performance applications in effective exercise programs.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.4
• /
• pp.771-781
• /
• 2017

The helmet is an imperative personal protective equipment. This protective device must be able to guard the human head against potential risks. Helmets are classified according into the purpose of use; therefore, the required performance and specifications depend on the type of products. Military helmets are intended to protect the wearer's head from bullets and shrapnel. Generally, lightweight super fibers and fiber reinforced composite materials are used as helmet shell materials, and NIJ STD of U.S. Department of Justice is most widely used as international standard related to bulletproof helmets. Safety helmets are widely used for industrial application and sports leisure. In general, the performance of shock absorption must be ensured, and various lining systems are applied in material, design, and combination methods. Evaluation standards have also been classified and strictly controlled for each purpose; therefore, it is difficult to certify with the existing standards such as the recently developed convergence helmets. However, it is possible to launch the product through a separate national integrated certification procedure.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.96-97
• /
• 2011

In these days many korean people have much interested in oceanic sports and oceanic leisure equipment.. However, the current condition for the marine leisure in korea are not advanced even worse than wnderdeveloped countries.. Recently several suggestion for vitalization on the marine leisure industry and preparations of the laws & the regulations for marine leisure.. This paper suggest the new marina model using ubiquitous sensor network to reduce the risk of the policy and the investment in the filed og marine leisure industry.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.24 no.2
• /
• pp.9-15
• /
• 2018

Background: The purpose of this study was to compare the effects of mulligan taping on knee joints on balance ability and strength with repeated measurements. Methods: Seventeen patients were randomly assigned to the 8 taping group and the 9 repeat measurement group. To measure the balance ability, fall risk assessment equipment was used, and the measurement of the muscle strength was performed by using the equipment of the same company. Results: Balanced abilities and muscle strength were increased in groups with taping only after Mulligan taping. Conclusions: The application of mulligan taping did not have the effect of stimulating the inherent receptive sensation. However, active grouping of the knee joint taping only, and muscle strength and muscle strength were increased. It increases the stability and activity of the muscles that operate on the balance of the active knee joint and muscle strength, thereby enhancing exercise prevention and prevention performance and exercise performance.

• Journal of Distribution Science
• /
• v.21 no.7
• /
• pp.73-82
• /
• 2023

Purpose: Social networking services have been recognized as an attractive distribution channel at a time when efforts to deliver effective messages to consumers are essential amid a flood of advertisements in the multi-media era. In that sense, this study investigated the effect of the scarcity message type (limited-time vs. limited-quantity) and sender type (corporate vs. consumer) on the intention to purchase golf equipment by Instagram distribution channel. Research design, data and methodology: Data from 108 college students in their 20s and 30s with experience using Instagram were collected online through convenience sampling. A frequency analysis, exploratory factor analysis, reliability analysis, independent sample t-test, and two-way analysis of variance were performed using SPSS 23.0. Results: The results showed that limited-quantity messages induce a higher purchase intention than limited-time messages. Similarly, consumer-sent advertisements induce a higher purchase intention than corporate-sent advertisements. Further, there is no statistically significant interaction effect of the scarcity message type and sender type on the intention to purchase golf equipment. Conclusions: This study is meaningful in verifying consumers' purchase intention depending on the type of scarcity message and the type of sender in Instagram advertisements. The results yield significant implications for marketers and several directions for future research.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.5
• /
• pp.111-121
• /
• 2024

With strength training comes the risk of injury and the benefits of exercise. Lack of knowledge and experience or repetitions at excessive intensity can lead to injury. Adequate feedback on an exercise's progress can increase the exercise's effectiveness and reduce injuries by providing scientific data and psychological motivation. This study aimed to validate EMG equipment and examine the effects of 8 weeks of biofeedback training with wireless electromyography. A correlation analysis between the Noraxon device and Fitsig^®(EMG Prototype), a well-known instrument in the field of research, showed a moderate correlation. Statistically significant differences in humeral circumference, humeral muscle mass, and biceps and triceps strength were found between the left and right sides of the body over time, with no differences in the type of exercise. Feedback training with real-time EMG was found to be favorable for hypertrophic growth and strength improvement. Future studies should be conducted to investigate its application in sports activities further.

• Journal of The Korean Society of Integrative Medicine
• /
• v.8 no.3
• /
• pp.33-41
• /
• 2020

Purpose : Conventional Balance Measurement can only measure the center of gravity and the shaking movement of the body. As a result, it has the disadvantages of not responding to visual changes and blocking functions of variables. This study was carried out to evaluate the performance of new equipment that measures the balance of the body using changes in body segment and pressure using the acceleration sensor to compensate for the disadvantages of the existing equipment. Methods : To this end, balance ability was measured in 43 healthy male/female adults without orthopedic injuries and nervous system damage in the last 6 months. in a situation where the visual information was restricted by Virtual Reality (VR) gear, all subjects measured and evaluated the balance ability utilizing the new equipment. Balance measurement (Prime Medilab, Korea) and Wii fit (Nintendo, Japan) were used to measure the balance ability of the subjects, and the balance ability test was performed in 4 postures using each device for data acquisition. The test duration for each posture was 30 seconds. For data acquisition, the average value of three experiments measured using each equipment was analyzed, and the statistical test was performed using the independent sample and the corresponding sample t-test, and the significance level was set to α=.05. Results : As a result of measuring the balance ability using individual equipment, blocking visual information using VR gear, the average speed, maximum speed, and moving area of the COP increased equally. It was found that the obtained absolute size of the result in Wii was somewhat larger than that of BM. Conclusion : It is considered that in the future research, it is necessary to measure changes in the body's center of gravity through image analysis, etc., to make clear comparison and evaluation of the usability.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.813-823
• /
• 2020

Purpose: In order to maximize the stability and productivity of the work through simulation prior to high-risk facilities and high-cost work such as dismantling the facilities inside the reactor, we intend to use digital twin technology that can be closely controlled by simulating the specifications of the actual control equipment. Motion control errors, which can be caused by the time gap between precision control equipment and simulation in applying digital twin technology, can cause hazards such as collisions between hazardous facilities and control equipment. In order to eliminate and control these situations, prior research is needed. Method: Unity 3D is currently the most popular engine used to develop simulations. However, there are control errors that can be caused by time correction within Unity 3D engines. The error is expected in many environments and may vary depending on the development environment, such as system specifications. To demonstrate this, we develop crash simulations using Unity 3D engines, which conduct collision experiments under various conditions, organize and analyze the resulting results, and derive tolerances for precision control equipment based on them. Result: In experiments with collision experiment simulation, the time correction in 1/1000 seconds of an engine internal function call results in a unit-hour distance error in the movement control of the collision objects and the distance error is proportional to the velocity of the collision. Conclusion: Remote decomposition simulators using digital twin technology are considered to require limitations of the speed of movement according to the required precision of the precision control devices in the hardware and software environment and manual control. In addition, the size of modeling data such as system development environment, hardware specifications and simulations imitated control equipment and facilities must also be taken into account, available and acceptable errors of operational control equipment and the speed required of work.