• Journal of Multimedia Information System
• /
• 제7권2호
• /
• pp.165-174
• /
• 2020

This document outlines a new color image encryption technology development. After splitting the original image into 240-bit blocks and modifying the first block by an initialization vector, an improved Feistel circuit is applied, sponsored by a genetic crossover operator and then strong chaining between the encrypted block and the next clear block is attached to set up the confusion-diffusion and heighten the avalanche effect, which protects the system from any known attack. Simulations carried out on a large database of color images of different sizes and formats prove the robustness of such a system.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 1998년도 추계 학술대회논문집
• /
• pp.78-83
• /
• 1998

A finite-difference method based on conservative supra characteristic method(CSCM) type upwind flux difference splitting has been studied on the bluntness effect on the wall heat transfer rate and wall pressure over blunt-body. The results show that the stagnation heating varies inversely with the square root of the nose radius.

• Bulletin of the Korean Chemical Society
• /
• 제3권4호
• /
• pp.140-144
• /
• 1982

Through-space and through-bonds interactions between two nonbonding orbitals are shown to be first-order and second-order perturbations of nonbonding orbitals by the framework sigma orbitals. Through-space interactions for diamines and triplet diradicals are always destabilizing, but through-bonds interactions are stabilizing owing to their coupling with through-space effect. Anomalies in level ordering and magnitudes of energy splitting can be rationalized with the present approach. Orbtial interactions predicted with the PMO method were found to be consistent with those obtained by STO-3G calculations and photoelectron spectroscopy.

• 한국전산유체공학회지
• /
• 제13권4호
• /
• pp.33-38
• /
• 2008

For study on the unsteady blockage effect, flows around a rotationally oscillating circular cylinder with relatively low forcing frequency in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The computed results of the oscillating cylinder in the test section showed that the fluctuations of lift and drag are augmented by the blockage effects. The drag further increases because of low base pressure. The pressure on the test section wall shows the harmonics having the oscillating and the shedding frequencies contained in the blockage effect.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.733-736
• /
• 2002

As composite materials, the addition of steel fiber in concrete significantly improves the engineering properties of structural members. The purpose of this study is to define the strengthening effect of steel fiber in a point of material usage. From tile material test. compression strength, tensile splitting strength and flexural strength were evaluated by steel fiber volume fraction ($V_f$) and aspect ratio (AR) of steel fiber. In case of AR 67, $V_f$ 2.0% could be achieved maximum steel fiber strengthening effect. And the AR 80 case, $V_f$ 1.0% could be achieved maximum effect than the effect of $V_f$ 1.5%.

• 한국전산유체공학회지
• /
• 제10권2호
• /
• pp.60-68
• /
• 2005

For study on the unsteady wall interference effect, flows around a forced oscillating airfoil in closed test-section wind tunnels have been numerically investigated by solving compressible Navier-Stokes equations. The numerical scheme is based on a node-based finite-volume method with the Roe's flux-difference splitting and an implicit time-integration method coupled with dual time-step sub-iteration. The Spalart-Allmaras one-equation model is employed for the turbulence effect. The computed results of the oscillating airfoil having a thin wake showed that the lift curve slope is increased and the magnitude of hysteresis loop is reduced by the interference effects. Since the vortex around the airfoil is generated and convected downstream faster than the free-air condition, the phase of lift, drag and pitching moment coefficients was shifted. The pressure on the test section wall shows harmonic terms having the oscillating frequency contained in the wail effect.

• 한국결정학회지
• /
• 제12권4호
• /
• pp.197-206
• /
• 2001

수평 전기로에서 AgInS₂ 다결정을 합성하여 HWE(Hot Wall Epitaxy)방법으로 AgInS₂ 단결정 박막을 반절연성 GaAs(100)기판에 성장시켰다. AgInS₂ 단결정 박막의 성장 조건은 증발원의 온도 680℃, 기판의 온도 410℃였고 성장 속도는 0.5㎛/hr였다. AgInS₂ 단결정 박막의 결정성의 조사에서 10 K에서 광발광(photoluminescence)스펙트럼이 597.8 nm(2.0741 eV)에서 exciton emission스펙트럼이 가장 강하게 나타났으며, 또한 이중결정 X-선 요동곡선(DCRC)의 박폭치(FWHM)도 121 arcsec로 가장 작아 최적 성장 조건임을 알수 있었다. Hall 효과는 van der Pauw 방법에 의해 측정되었으며, 온도에 의존하는 운반자 농도와 이동도는 293K에서 각각 9.35×10/sup 16/㎤, 294㎠/V·s 였다. AgInS₂ /SI(SEmi-Insulated) GaAs(100) 단결정 박막의 광흡수와 광전류 spectra를 293K에서 10K까지 측정하였다. 광흡수 스펙트럼으로부터 band gap E/sub g/(T)는 Varshni 공식에 따라 계산한 결과 2.1365eV-(9.89×10/sup-3/eV/K/)T²(T+2930K)이었으며 광전류 스펙트럼으로부터 Hamiltopn matrix(Hopfield quasicubic mode)법으로 계산한 결과 crystal field splitting Δcr값이 0.1541eV이며 spin-orbit Δso 값은 0.0129eV임을 확인하였다. 10K일때 광전류 봉우리들은 n=1 일때 A₁-, B-₁와 C₁-exction 봉우림을 알았다.

• 대한화약발파공학회:학술대회논문집
• /
• 대한화약발파공학회 2006년도 추계학술발표회 논문집
• /
• pp.167-184
• /
• 2006

본 연구는 굴착대상구역에 축사 및 마을주택구조물이 근접위치하고 있어 이들 시설물에 대한 피해 방지를 위해 사전 발파환경영향평가를 실시하였다. 그 결과 발파공법의 적용이 불가하여 소음과 진동저감을 위해 건교부의 발파공법분류에 의한 암파쇄굴착 공법 중, 브레이커에 의한 2차 파쇄가 없는 할암공법의 일종인 슈퍼웨찌(Super wedge) 공법을 적용하였으며, 작업 공종별로 소음전용측정기(SC-310c)와 진동전용측정기 (BLASTMATE)를 이용하여 소음과 진동의 크기를 측정하였다. 측정결과 진동을 기준하면 최근접(약 10m) 위치에서 천공, 절개, 집토 및 상차작업은 가능하나 장비이동이 고려되어야 하며, 소음을 기준하면 절개작업을 제외하고 천공, 집토 및 상차작업은 20m 이내에서도 굴착작업 자체가 어려운 것으로 나타났다. 따라서 건교부 발파공법분류에 의한 암파쇄굴착공법은 작업과정별 소음도를 감안하여 적용되어야 한다.

• Bulletin of the Korean Chemical Society
• /
• 제34권7호
• /
• pp.2067-2072
• /
• 2013

Hydrogen ($H_2$) treatment using a two-step $TiO_2$ nanotube (TONT) film was performed under various annealing temperatures from $350^{\circ}C$ to $550^{\circ}C$ and significantly influenced the extent of hydrogen treatment in the film. Compared with pure TONT films, the hydrogen-treated TONT (H:TONT) film showed substantial improvement of material features from structural, optical and electronic aspects. In particular, the extent of enhancement was remarkable with increasing annealing temperature. Light absorption by the H:TONT film extended toward the visible region, which was attributable to the formation of sub-band-gap states between the conduction and valence bands, resulting from oxygen vacancies due to the $H_2$ treatment. This increased donor concentration about 1.5 times higher and improved electrical conductivity of the TONT films. Based on these analyses and results, photoelectrochemical (PEC) performance was evaluated and showed that the H:TONT film prepared at $550^{\circ}C$ exhibited optimal PEC performance. Approximately twice higher photocurrent density of 0.967 $mA/cm^2$ at 0.32 V vs. NHE was achieved for the H:TONT film ($550^{\circ}C$) versus 0.43 $mA/cm^2$ for the pure TONT film. Moreover, the solar-to-hydrogen efficiency (STH, ${\eta}$) of the H:TONT film was 0.95%, whereas a 0.52% STH efficiency was acquired for the TONT film. These results demonstrate that hydrogen treatment of TONT film is a simple and effective tool to enhance PEC performance with modifying the properties of the original material.

• 한국전기전자재료학회논문지
• /
• 제14권6호
• /
• pp.445-454
• /
• 2001

The stochiometric mix of evaporating materials for the CuInSe$_2$ single crystal thin films was prepared from horizontal furnace. To obtain the single crystal thin films, CuInSe$_2$ mixed crystal was deposited on thoroughly etched semi-insulating GaAs(100) substrate by the Hot Wall Epitaxy(HWE) system. The source and substrate temperature were 62$0^{\circ}C$ and 41$0^{\circ}C$, respectively. The crystalline structure of single crystal thin films was investigated by the photoluminescence and double crystal X-ray diffraction (DCXD). The carrier density and mobility of CuInSe$_2$ single crystal thin films measured from Hall effect fby van der Pauw method are 9.62x10$^{16}$ cm$^{-3}$ , 296$\textrm{cm}^2$/V.s at 293 K, respectively. From the photocurrent spectrum by illumination of perpendicular light on the c-axis of the CuInSe$_2$ single crystal thin film we have found that he values of spin orbit splitting ΔSo and the crystal field splitting ΔCr were 6.1 meV and 175.2 meV at 10K, respectively. From the photoluminescence measurement on CuInSe$_2$ single crystal thin film we observed free excition (Ex) existing only high quality crystal and neutral bound exiciton (D$^{\circ}$,X) having very strong peak intensity. Then, the full-width-at-half-maximum(FWHM) and binding energy of neutral donor bound excition were 7meV and 5.9meV, respectivity. by Haynes rule, an activation energy of impurity was 50 meV.