• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1998년도 Proceedings The 4th International Transport Symposium
• /
• pp.17-24
• /
• 1998

The article expounds that the speed competition is the motive force of each transportation means. It also analyzes the current condition of the speed of Chinese railways. The developing strategy for Chinese railway is to raise the speed of the existing lines as a primary step and to construct the high-speed railway in selected sections concurrently, which proved that constructing high-speed railway in Beijing-Shanghai area is the best choice.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.611-616
• /
• 2003

The application of the tilting train is one of the most efficient ways to increase curving speed of train on existing tracks or on mountain railway lines with sharp curves. It can increase the running speed and ensure the passenger comfort and safety at the same time. Therefore, the development of tilting train has been paid high attention by many countries in the world. Tilting trains have been operated successfully in many countries such as Italy, Spain, Germany, Sweden, England and so on. The tilting trains possess broad prospects in raising speeds. The distributed EMU tilting train set will be developed according to the Korea railway conditions and will be operated on the Honam line, Janghang line and Jungang line. Because there is high percentage of curves on these lines. these lines are suited to operating tilting trains to raising speed and saving passenger traveling time. In order. to improve the curving performance of the tilling train. the active-control algorithm is utilized for the tilting bogie.

• 기술사
• /
• 제24권1호
• /
• pp.95-103
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications newtork. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of hereafter for the following respective technologies is desired.

• 기술사
• /
• 제24권2호
• /
• pp.127-136
• /
• 1991

The communication transmission engineering plays the most important role in electrical communications engineering. Recently, it has been making remarkable progress as an infrastructure supporting informationaged society. Specially, the start of television conference and service of high speed digital transmission can be said it is announcing a raising curtain of high speed broad band age. Together with high speed broad band service needs a capacity as much as several or several hundred times of telephone with one circuit, various kinds of service forms are anticipated to emerge, it is anticipated to give a big impact to the way of future communications network. At present, telecommunication network is transforming telephone voice information by analog technology into a flexible higher system disposable of a variety of information such as pictures or data other than telephone by the introduction of digital technology. Consequently, the development of the hereafter for the following respective technologies is desired.

• Tribology and Lubricants
• /
• 제9권2호
• /
• pp.63-69
• /
• 1993

The wear properties of two types of $Si_3N_4$(silicon nitride) exposed to high and low humidity were examined experimentally for various sliding speed. Bearing steel was used as the disk material at pin-on-disk type sliding. Wear rates of pressureless sintered-plus-hot-isostatic pressed Si3N4 were slightly lower than those of pressureless sintered $Si_3N_4$. It was observed that adsorbed moisture and sliding speed markedly influenced the wear properties of $Si_3N_4$. The highest wear rate was obtained under the high humidity and low sliding speed condition. As the sliding speed was increased, wear rates were decreased and the humidity effect on the wear rates of $Si_3N_4$ was lowered. The result that the $Si_3N_4$ pin showed a high wear rate under the high humidity condition was explained by the property change due to the adsorbed moisture, plowing action by the hard particles of $Fe_2O_3$ from the disk, and the corrosion effect at $Si_3N_4$ surface. Increase in sliding speed was supposed to have reduced the humidity effect on wear rate of $Si_3N_4$ by raising the temperature of both the bearing steel disk and $Si_3N_4$ pin specimen.

• 대한교통학회:학술대회논문집
• /
• 대한교통학회 1996년도 제3회 한-중 국제학술회의
• /
• pp.43-49
• /
• 1996

In this paper, the south-north railway transportation demand and the present situation of Huning line(from Shanghai to Nanjing) are analyzed, and the important significance and the simulation, we also discuss the transportation organization plans, the transportation capacities, the stage by stage implement programs and the comprehensive social economic benefits on the condition of raising the train speed on Huning line.

• 원예과학기술지
• /
• 제34권5호
• /
• pp.719-726
• /
• 2016

본 연구에서는 고온 및 저온의 육묘 온도가 파프리카 묘의 소질 및 정식 후 초기 생육에 미치는 영향을 알아보았다. 육묘 온도는 다용되고 있는 $23^{\circ}C$를 대조구로 하여 고온을 $31^{\circ}C$, 저온을 $15^{\circ}C$로 처리하였다. 육묘 온도에 따라 자란 묘의 초장, 줄기직경, 생체중, 건물중, 엽수, 엽면적 등은 $15^{\circ}C$와 $31^{\circ}C$ 처리구에서 대조구보다 유의하게 낮았다. 그리고 그 묘들의 정식 4주 후 식물체 특성에서도 같은 경향을 나타내었다. 대조구 대비 $15^{\circ}C$와 $31^{\circ}C$ 처리구의 단위 시간 당 건물중 및 엽면적의 증가 속도는 육묘 기간보다 정식 후에 크게 높아졌다. 정식 후 4주 간 자란 $15^{\circ}C$와 $31^{\circ}C$ 처리구의 식물체의 작물생장속도와 엽면적지수는 대조구와 유의한 차이를 나타내지 않았고, 상대생장율과 순동화율은 유의하게 높았다. 이러한 $15^{\circ}C$처리구의 정식 후 생장 속도 및 순동화율의 증가는 정식 후 정식 전에 비해 크게 높아진 광합성 능력에서 기인하였다. 이상의 결과를 요약하면, 파프리카의 저온 및 고온 육묘온도는 묘 및 정식 후 식물체의 생육을 저하시켰다. 그리고 정식 후의 식물체의 회복 속도는 $31^{\circ}C$보다 $15^{\circ}C$에서 육묘된 묘에서 빨랐다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.323-324
• /
• 2006

This paper presents dynamics of register error on a compensator roll type converting machine. Though a register control is an important aspect of a converting machine, it has not been taken into account as a main subject. Lately, demands for high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the high speed machines because capacities fur designing of the converting machine is restricted lower than 300mpm. Moreover register control is the key to product flexible displays through roll-to-roll systems. In this paper, a compensator roll type register controller is analyzed using mathematical model of register error. A case study for reducing transient register errors is discussed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.65-66
• /
• 2006

Dancer systems are most widely used mechanism for attenuation of tension disturbances. Lately, demands fur high speed converting machines over 500mpm(m/min) are raising but domestic converting industries can not come up with the machines because capacities for a designing of the converting machine are restricted lower than 300mpm. Moreover roll-to-roll is attracted flexible display manufacturer's attention as a effective method for productivity. A constant tension level in the span before the first printing cylinder is the key of high speed quality printing. This paper presents a modeling and simulations of dancer systems on converting machines.

• 전기학회논문지
• /
• 제68권5호
• /
• pp.656-661
• /
• 2019

Currently, the devices to generate ion winds in air are mainly composed of corona electrodes and induction(ground) electrodes, of which the corona electrodes mainly use needles or wires as electrodes and the induction electrodes use plate electrodes of ring or mesh type. Ion winds can be effectively generated through a diverse combination of corona electrodes and induction electrodes mentioned above. However, only changing the form and structure of corona electrodes and induction electrodes has a limit in raising the speed of ion winds. This paper conducted a study on the characteristics of ion wind generation by additionally installing acceleration electrodes in addition to corona electrodes and induction electrodes to increase the speed of ion winds.