• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.7A
• /
• pp.629-634
• /
• 2002

The next generation of wireless communication system is expected to provide users with wireless multimedia services such as high speed internet access and wireless mobile computing. Depending on the Quality of Service(QoS) requirements and different applications per user, many wireless communication systems have been proposed. The simple decoding algorithm of space-time block coding is based on the assumption of flat fading channel, where no intersymbol interference exists. In this paper, we propose to combine space-time transmit diversity with adaptive equalizer. The proposed system effectively eliminates interference caused by multipath environment. Simulation results show that the proposed system provides improved bit error rate performance.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.337-342
• /
• 2010

In this paper, a new architecture for digit-parallel/bit-serial GF($2^m$) multiplier with low complexity is proposed. The proposed multiplier operates in polynomial basis of GF($2^m$) and produces multiplication results at a rate of one per D clock cycles, where D is the selected digit size. The digit-parallel/bit-serial multiplier is faster than bit-serial ones but with lower area complexity than bit-parallel ones. The most significant feature of the digit-parallel/bit-serial architecture is that a trade-off between hardware complexity and delay time can be achieved. But the traditional digit-parallel/bit-serial multiplier needs extra hardware for high speed. In this paper a new low complexity efficient digit-parallel/bit-serial multiplier is presented.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.4C
• /
• pp.408-414
• /
• 2010

When we are collecting traffic information on CCTV images, we have to install the detect zone in the image area during pan-tilt system is on duty. An automation of detect zone with pan-tilt system is not easy because of machine error. So the fisheye lens attached camera or convex mirror camera is needed for getting wide area images. In this situation some troubles are happened, that is a decreased system speed or image distortion. This distortion is caused by occlusion of angled ray as like trembled snapshot in digital camera. In this paper, we propose two methods of de-blurring to overcome distortion, the one is image segmentation by nonlinear diffusion equation and the other is deformation for some segmented area. As the results of doing de-blurring methods, the de-blurring image has 15 decibel increased PSNR and the detection rate of collecting traffic information is more than 5% increasing than in distorted images.

• Proceedings of the KSR Conference
• /
• 2003.10c
• /
• pp.659-665
• /
• 2003

This paper presents a Train Communication Network simulator (TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported. This paper presents a Train Communication Network simulator(TCNS) that can be used to evaluate the performance of TCN. TCN was accepted as the standard of the protocol for the communication network in trains. TCN of fieldbus was adopted as international standardization IEC 61375 in 1999. It has been operating on G7 train in korea. This paper developed TCNS(Train Communication Network simulator) as a simulator for performance evaluation. We can verify TCNS for preventing many kinds of occurring problems between the devices in data-communication. This study was developed TCNS as a simulator for the performance evaluation. We analyzed correlation between token, transmission data per paket and transmission speed of bus, through the TCNS, also analyzed result according to error rate of TCN. We carry out some simulation tests using the TCNS to show practical uses of the simulator. Results of some simulation tests are also reported.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.12 no.3
• /
• pp.1-7
• /
• 1975

In this paper, a method of writing and reproducing high density data with ordinary Audio cassette deck is discribed. In writing, the data N or NRZ code are modulated into PM code to take the positive code N(1) and the negative code N(0) are taken from the complement of the NRZ code, each of which are written into 2 channel track. In reading, the error corrected and the clock pulse can be generated from the reading pulse itself. Also, without modifying the interior circuit of the deck it is possible to use the deck in both the data and audio by adapting a few simple circuits. Over the range of 25HZ-4KHZ, it was possible to write and reproduce at the speed of 787 bps transmission rate.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.34C no.6
• /
• pp.11-21
• /
• 1997

The delay models for CMOS invertr presented so far predicted the delay time quite accurately whens input transition-time is very small. But the problem that the accuracy is inclined to decrease becomes apparent as input transition tiem increases. In this paper, a delay model for CMOS inverter is presented, which accuractely predicts the delay time even though input transition-time increases. To inverter must be included in modeling process because the main reason of inaccuracy as input transition tiem is the leakage current through the complementary MOS. For efficient modeling, this paper first models the MOSes with simple I-V charcteristic, with which both the pMOS and the nMOS are considered easily in calculating the inverter delay times. This resulting model needs few parameters and re-models each MOS effectively and simply evaluates output voltage to predict delay time, delay values obtained from this effectively and simply evaluates output voltage to predict delay time, delay values obtained from this model have been found to be within about 5% error rate of the SPICE results. The calculation time to predict the delay time with the model from this paper has the speed of more than 70times as fast as to the SPICE.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.1
• /
• pp.39-44
• /
• 2012

In this paper, we studied a high speed Trellis Coded Modulation (TCM) system and 8PSK-TCM system, and compare 8PSK-TCM system with QPSK system of BER. We know that 8PSK-TCM had 3 db improvement of BER than QPSK. And we demonstrated the superiority of 8PSK-TCM by simulating with Matlab. Input signal was 2 bits long, and 8PSK-TCM used 3bits long. Results of this simulation said that 8PSK-TCM had 3 db improvement of BER than QPSK.

• Journal of Satellite, Information and Communications
• /
• v.5 no.1
• /
• pp.1-5
• /
• 2010

Recently, the transmission amount of information that each single person requires is growing by development of electron information communication technology. So in this paper we analysis the phase noise characteristics to obtain a most suitable of SNR performance request characteristic by BER on CATV transmission system that satisfy performance request DOCSIS 2.0 standard. Especially we get the parameter value of PLL that satisfy phase noise characteristic request standard using developed simulator. Presented method can be used to obtain a performance request standard connection performance request standard of high speed CATV transmission system in the future.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.583-586
• /
• 2004

In this paper, we have analyzed the performance of synchronization of CCK(Complementary Code Keying) modulation scheme used for IEEE 802.11g wireless LAM system supporting 54 Mbps of high speed data rate over 2.4 GHz. At receiver, the clock frequency offset is caused by noise or fading. This frequency error occurs the offset of clock timing and causes ISI. Therefore the tracking is required to reduce the clock timing offset. The DLL(Delay Lock Loop), asychronization mode, performing tacking the clock is used for the simulation. The simulation result shows jitter variance and BER performance in the AWGN and multipath fading channel environment.

• Journal of the Korean Society for Precision Engineering
• /
• v.30 no.1
• /
• pp.59-66
• /
• 2013

The measuring of internal defects of objects using the shearography has many advantages. It is a non-contact and non-destructive method and It has a real time measurement speed and no constraints of object shape. Compared to ESPI(Electronic Speckle Pattern Interferometry), Shearography has a very low error rate by vibration and air turbulence. So shearography provides possibilities of industrial application. In this paper, Image processing algorithm that is measurement of out-of-plane deformation using the shearography is proposed by developed using the LabVIEW 2010 and measurement result of out-of-plane ESPI and Shearography are compared quantitatively.