• Journal of the Semiconductor & Display Technology
• /
• v.5 no.2 s.15
• /
• pp.15-18
• /
• 2006

This paper presents a optimizing algorithm getting through analyzing a image improvement algorithm using retinex theory. Improving a existing retinex theory's slow process speed, our proposal is that it controls a small filter size of surrounding function by comparing with original algorithm. So slow process speed decreased drastically. For filling a short of lighting information by small filter, we also selected gray image as a forth channel. Using the color constancy, we got fast process time like linear color correction and could do comfortable auto color rectification according to other images.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.7
• /
• pp.43-51
• /
• 2013

This paper describes the development of the telemetry link system for the high data rate transmission in high speed rocket application. In consideration of bandwidth efficiency, frequency selective fading and doppler frequency offset, we used DQPSK instead of PCM/FM which has been the primary modulation format in aeronautical telemetry. Also we used the spatial diversity with multiple receiving antennas to mitigate multipath interference which is the dominant channel impairment and the Turbo Product Code for Forward Error Correction to improve bit error rate performance.

• Journal of Power Electronics
• /
• v.11 no.1
• /
• pp.37-44
• /
• 2011

In this paper, a four-phase 8/6-pole 4-kW SR motor drive model is presented. Based on experimental data, the model allows an accurate simulation of a drive in dynamic operation. Simulations are performed and a laboratory type set-up is built based on a TI TMS320F2812 platform to experimentally verify the theoretical results obtained for a SR motor. To reduce acoustic noise and to correct the power factor of this drive, a two-stage power converter is proposed that uses a current source rectifier (CSR) as the input stage for the asymmetrical converter of the studied SRM. Employing the space-vector modulation (SVM) method in matrix converters, the CSR switching allows the dc link's capacitors to be eliminated and the power factor of the SRM drive to be improved. As the electrical motive force (emf) is directly proportional to the rotor speed, the input voltage to the machine can be programmed to be a function of the speed with the modulation index of the CSR, leading to a reduction in the acoustic noise of the SRM drive. Simulation of the whole SRM drive system is performed using MATLAB-Simulink. The results fully comply with the required conditions such as power factor correction with an improvement in the THD.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.52 no.11
• /
• pp.650-656
• /
• 2003

A high speed Viterbi decoder with a circularly connected 2-dimensional analog processing ceil array Is proposed. The proposed Viterbi .decoder has a 2-dimensional parallel processing structure in which an analog processing cell is placed at each node of a trellis diagram, the output column of the analog processing cells is connected to the decoding column, and thus, the output(last) column becomes a column right before the decoding(first) column. The reference input signal given at a decoding column is propagated to the whole network while Its magnitude is reduced by the amount of a error metric on each branch. The circuit-based decoding is done by adding a trigger signals of same magnitudes to disconnect the path corresponding to logic 0 (or 1) and by observing its effect at an output column (the former column of the decoding column). The proposed Viterbi decoder has advantages in that it is operated with better performance of error correction, has a shorter latency and requires no path memories. The performance of error correction with the proposed Viterbi decoder is tested via the software simulation.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.3 no.3
• /
• pp.170-176
• /
• 2008

According to the development of Internet, DWDM system needs to improve the performance for long distance transmission international optical signals. For higher the transmission capacity, we have to raise the transmission speed and increase a number of channels. To make qualifications, there are a lot of technologies such as line coding, modulation, precious fiber, broadband amplification, dispersion and forward error correction. Especially, FEC has been considered as a progressive technology for long distance transmission to carry out high speed and large capacity traffic. This paper introduced the progress of each new generation of FEC and the way to employ by current system analyzed the coding gain.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.12
• /
• pp.101-109
• /
• 2008

Induction motor needs reactive power to sustain the electromagnetic field required for rotating. If reactive power is provided by the load side instead of the source side, power factor will be increased. Power factor of induction motor is usually low and needs to be compensated with power capacitor. In domestic regulations, Capacitor capacity for the power factor correction of induction motor should be complied with the recommended value by the motor output. But, at the same output, characteristics of induction motor is different from each other by the rotation speed and is not suitable for application of regular capacitor value regardless of motor's characteristics. In this paper, we compared to each other with the existing value and new proposed value with rotation speed under the same output condition, confirmed that power capacitor capacity is needed to upgrade for the better power factor.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1645-1650
• /
• 2015

This paper presents the 3-dimensional electromagnetic field analysis method and correction of sensor distortion that is used by a motor speed sensor. The magnetic sensors are being expanded due to lower price than the other speed sensors such as resolver and encoder. Magnetic sensor generates sine and cosine waves when the motor rotates. However, the sine and cosine signals are distorted due to magnetic noise, which makes the angle error of the sensor, generated near by the Hall element. This paper defines an optimal design variables by using the Taguchi method to minimize output distortion of the magnetic sensor and permanent magnet. To enhance reliability of the magnetic position sensor from sensitivity error, assembly amplitude mismatch and the electrical angle, 3-Dimensional electromagnetic finite element method and correction algorithm errors were performed in due of the magnetic sensor in order to improve the quality of the initial production model.

• The Journal of Asian Finance, Economics and Business
• /
• v.8 no.5
• /
• pp.769-775
• /
• 2021

The objective of this research was to analyze the factors influencing the farm-gate shrimp prices in Thailand using monthly time series from January 2001 to December 2019. The econometric methodology was employed to satisfy the purpose, consisting of the cointegration test for revealing the long-run relationship and equilibrium elasticity between the variables as well as the error correction model for detecting speed adjustment to shock responses. The empirical results revealed that (1) the export shrimp prices, shrimp production in the country, and shrimp export volume indicated a long-run relationship running to the farm-gate shrimp prices in Thailand with the size of equilibrium elasticity equal to 1.083%, -0.256%, and 0.123, respectively, and (2) the farm-gate shrimp prices in Thailand would adjust to the equilibrium line with a speed equal to 20.147% if there was any kind of incident or shock which caused the relationship to deviate from the equilibrium point. There was no relationship in terms of global shrimp prices and the exchange rate for farm-gate shrimp prices in Thailand. The recommendations should emphasize the varieties of shrimp products for export to other countries beyond the main trading markets nowadays to reduce risks and fluctuations in the export prices of shrimp products.

• ETRI Journal
• /
• v.44 no.1
• /
• pp.62-72
• /
• 2022

In this study, we propose a multi-GPU-based 8KVR stitching system that operates in real time on both local and cloud machine environments. The proposed system first obtains multiple 4 K video inputs, decodes them, and generates a stitched 8KVR video stream in real time. The generated 8KVR video stream can be downloaded and rendered omnidirectionally in player apps on smartphones, tablets, and head-mounted displays. To speed up processing, we adopt group-of-pictures-based distributed decoding/encoding and buffering with the NV12 format, along with multi-GPU-based parallel processing. Furthermore, we develop several algorithms such as equirectangular projection-based color correction, real-time CG overlay, and object motion-based seam estimation and correction, to improve the stitching quality. From experiments in both local and cloud machine environments, we confirm the feasibility of the proposed 8KVR stitching system with stitching speed of up to 83.7 fps for six-channel and 62.7 fps for eight-channel inputs. In addition, in an 8KVR live streaming test on the 5G MEC/cloud, the proposed system achieves stable performances with 8 K@30 fps in both indoor and outdoor environments, even during motion.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.521-524
• /
• 2009

This study describes aerodynamic noise of high speed wind turbine system, which is invented as a new concept in order to reduce the torque of main shaft, for design parameters of the rotor blade. For parametric study of high speed rotor aerodynamic noise, Unsteady Vortex Lattice Method with Nonlinear Vortex Correction Method is used for analysis of wind turbine blade aerodynamic and Farassat1A and Semi-Empirical are used for low frequency noise and airfoil self noise. Parameters are chord length, twist and rotational speed for this parametric research. In the low frequency range, the change of noise is predicted the same level as each parameters varies. However, in case of broadband noise of blade, the change of rotational speed makes more variation of noise than other parameters. When the geometric angles of attack are fixed, as the rotational speed is increased by 5RPM, the noise level is increased by 4dB.