• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2004년도 전력전자학술대회 논문집(1)
• /
• pp.38-41
• /
• 2004

Artificial intelligence control that use Fuzzy, Neural network, genetic algorithm etc. in the speed control of induction motor recently is studied much. Also, sensors such as Encoder and Resolver are used to receive the speed of induction motor and information of position. However, this control method or sensor use receives much effects in surroundings environment change and react sensitively to parameter change of electric motor and control Performance drops. Presume the speed and position of induction motor by ANN in this treatise, and because using FMRLC that is consisted of two Fuzzy Logic, can correct Fuzzy Rule Base through teaming and save good response special quality in change of condition such as change of parameter.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.1-14
• /
• 2014

This study has found out appropriate scopes of correlated color temperature and illuminance value with regard to general diffused lighting and work in the kitchen. It also has presented appropriate photometric quantity control speed for behavioral change with the following results. 1)For general diffused lighting, the appropriate photometric quantity has turned out to be 4,000 to 4,500K in color temperature and illuminance value of 300 to 400lx. And 300lx at 4,500K has proven to be the most comfortable, behavior-appropriate, and preferred pair. 2)As far as appropriate photometric quantity for work is concerned, color temperature of 4,000 to 5,000K and illuminance value of 600 to 800lx are appropriate, while 700lx at 4,500 to 5,000K are the most comfortable, behavior-appropriate, and preferred set. 3)As for appropriate photometric quantity control speed in behavioral change, 3 to 5 seconds has proven the most comfortable, appropriate, and preferred for behavioral change from entry to general areas and 1 to 3 seconds for change from general to work.

• 한국방재학회 논문집
• /
• 제8권4호
• /
• pp.47-52
• /
• 2008

Breakaway 단부장치 설계에 중요한 요소가 충돌 차량의 속도변화이다. 이는 충돌실험이나 3차원 유한요소 해석을 통해서 구할 수 있으나 에너지와 운동량 보존의 법칙을 이용하여 비교적 간단하게 계산할 수도 있다. 본 논문에서는 에너지와 운동량 보존의 법칙에 기초한 지주와 소형차 충돌 시 속도변화를 계산하는 식을 유도하였다. 이를 이용한 민감도 분석을 통하여 지주 단부의 분리하중, 파괴에너지, 차량의 강도 와 충돌속도가 소형지주에 충돌하는 차량의 속도변화에 미치는 영향을 파악하였다. 지주 단부가 기초에 고정된 정도를 나타내는 분리력 및 분리파괴에너지(Breakaway Fracture Energy)가 클수록 속도변화가 크고 충돌속도의 크기가 작을수록 속도변화가 크게 나타났다.

• 한국환경과학회지
• /
• 제14권9호
• /
• pp.851-860
• /
• 2005

In order to how well predict ISCST3(lndustrial Source Complex Short Term version 3) model dispersion of air pollutant at point source, sensitivity was analysed necessary parameters change. ISCST3 model is Gaussian plume model. Model calculation was performed with change of the wind speed, atmospheric stability and mixing height while the wind direction and ambient temperature are fixed. Fixed factors are wind direction as the south wind(l80") and temperature as 298 K(25 "C). Model's sensitivity is analyzed as wind speed, atmospheric stability and mixing height change. Data of stack are input by inner diameter of 2m, stack height of 30m, emission temperature of 40 "C, outlet velocity of 10m/s. On the whole, main factor which affects in atmospheric dispersion is wind speed and atmospheric stability at ISCST3 model. However it is effect of atmospheric stability rather than effect of distance downwind. Factor that exert big influence in determining point of maximum concentration is wind speed. Meanwhile, influence of mixing height is a little or almost not.

• 한국철도학회논문집
• /
• 제13권4호
• /
• pp.371-375
• /
• 2010

분산형 고속철도차량의 유리창 강도조건을 설정하기 위하여 열차가 터널을 통과하는 동안의 압력변동이 수치적으로 모사되었다. 계산결과를 토대로 객실 내외의 압력차이가 계산되었고, 객실 유리창에 작용하는 하중의 크기가 도출되었다. 열차가 터널을 통과하는 동안의 압력장을 모사하기 위하여 축대칭 Navier-Stokes 방정식에 기반한 전산유체역학이 이용되었다. 차량 내부의 압력변동은 차내 압력변화율과 차 내외부 압력변동의 선형 관계식에 근거한 1차 차분식을 이용하여 계산되었다.

• Journal of Magnetics
• /
• 제22권1호
• /
• pp.23-28
• /
• 2017

This paper is a study of the eddy current brake designed to replace the air brake of railway application. The eddy current brake has the advantage of being able to take a high current density compared to the other application because this brake is used for applying brakes to the rolling stock for a shorter amount of time. Also, this braking system has the merit of being able to take a high current density at low speed rather than at high speed, because the heat generated by the low speed operation is less than that of the high speed operation. This paper also presents a method of improving the output torque of the eddy current brake at low speed operation through a change of the winding as well as the basic design.

• Steel and Composite Structures
• /
• 제32권4호
• /
• pp.467-478
• /
• 2019

Running safety and ride comfort of high speed railway largely depend on the track geometry that is dependent on the bridge deformation. This study presents a theoretical study on mapping the bridge vertical deformations to the change of track geometry. Analytical formulae are derived through the theoretical analysis to quantify the track geometry change, and validated against the finite element analysis and experimental data. Based on the theoretical formulae, parametric studies are conducted to evaluate the effects of key parameters on the track geometry of a high speed railway. The results show that the derived formulae provide reasonable prediction of the track geometry change under various bridge vertical deformations. The rail deflection increases with the magnitude of bridge pier settlement and vertical girder fault. Increasing the stiffness of the fasteners or mortar layer tends to cause a steep rail deformation curve, which is undesired for the running safety and ride comfort of high-speed railway.

• 대한교통학회지
• /
• 제18권1호
• /
• pp.35-43
• /
• 2000

본 연구는 평면곡선부의 자유속도변화와 교통사고에 대한 영향을 분석하기 위해 수행되었으며, 이를 위해 곡선반경별로 진입부 직선도로-곡선부도로-진출부 직선도로로 구분하여 각 차량의 속도를 산출하였다. 평면곡선부의 자유속도변화와 기하구조의 영향을 분석하기 위해 선행차량에 의해 영향을 받지 않는 속도를 이용하였다. 이러한 곡선부에서 주행하는 차량의 자유속도를 통해 곡선반경별 최저속도와 그 속도가 나타나는 위치를 분석하였고, 해당 도로구간의 교통사고자료를 비교·분석하여 평면곡선 내의 속도변화와 교통사고발생간의 관계를 규명하였다 연구 결과는 다음과 같다. 첫째, 운전자들은 곡선시작지점에 도착하기 전에 충분히 속도를 줄이고, 곡선부에서 가장 낮은 속도가 나타나는 위치는 곡선내에서 나타난다. 이는 운전자의 시거에 의한 영향이다 둘째, 곡선부에서의 속도변화폭이 클수록 사고위험성은 크고, 실제 교통사고 발생건수도 높다. 본 연구의 결과를 통해 도로 주행의 안전성을 고려한 평가지표를 개발할 수 있으며, 이는 일관성 있는 도로설계를 이루게 한다.

• 한국운동역학회지
• /
• 제22권3호
• /
• pp.269-276
• /
• 2012

The purpose of This study's aim is to examine the difference in the changes of body segment movement, variables for ball quality, and carry at golf driver swing according to the ball quality using comparative analysis. Regarding the impact variables according to the ball quality using the track man and carry, club speed was the fastest at draw shot, ball speed was the fastest at straight shot, and smash factor was the lowest at draw shot. About the vertical launch angle, the fade shot showed the highest launch angle while the max height of the ground and ball was the highest at fade shot. And carry was the longest at draw shot. For the flight time, it was the longest at draw shot. The landing angle was the largest at fade shot. About the club head position change and trajectory, at the overall event point, the fade shot drew a more outer trajectory at the point of the follow through(E6) than the straight or draw shot. Regarding the angular speed of shoulder rotation, at the overall event point, the fade shot showed the greatest angular speed change in the follow through(E6). Also, about the angular speed of pelvic rotation, at the overall event point, the draw shot showed the greatest angular speed change at the point of down swing(E4). Concerning the stance angle change, both straight and fade shots were open as the concept of open stance whereas the draw shot was close as that of close stance. Regarding the previous study, the most important factor of deciding Ball Quality is the club face angle's open and close state at Impact. In short, the Ball Quality and carry were decided by this factor.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1191-1203
• /
• 2011

In case of Typhoon Dianmu, the temperature, wind speed, wind direction and the rainfall per hour changed dramatically when the center of the typhoon passed through Gimhae. Such a change was commonly found in the regions where the center of the typhoon passed through but almost not in the regions far away from it. For example, in the case of Typhoon Malou where the center of the typhoon was far away from the observation site, such a phenomenon was not observed. The analysis of the vertical observation data showed that there was a little change in the wind speed and wind direction in the vertical direction in the case of Typhoon Dianmu of which center passed through Gimhae. There was a great change in the wind speed according to the height in the lower atmosphere just before the center of the typhoon approached the region. When the center of the typhoon was passing through the region, the vertical wind speed was decreased. However, the wind speed was rapidly increased again after the center of the typhoon had passed through the region. Unlike the Dianmu, the difference in the wind speed and wind direction between the upper layer and lower layer of the atmosphere was relatively great in the case of Malou.