Abstract
The Purpose of this Paper was to study the relationship between the change of operating speeds and the accidents on horizontal curves. For this purpose, we divided a horizontal curve section into two parts, a tangent section and a curve section, to estimate the operating speed for each vehicle. For studying relationship between the change of speed and geometric effect, the free-flow speed was used. The location and speed for the lowest speed were studied. Also, we analyzed the relationship between the change of operating speeds and the accidents. The followings are resulted in this study. First, drivers tend to reduce speeds significantly before they reach a curve. And the lowest speed was recorded at the downstream of the Point of curve (PC) due to the limited sight-distance of drivers on curve. Second, the larger the change of operating speeds become, the greater frequency of accident was recorded. These results can be used for developing the safety index on highways to check the design consistency.
본 연구는 평면곡선부의 자유속도변화와 교통사고에 대한 영향을 분석하기 위해 수행되었으며, 이를 위해 곡선반경별로 진입부 직선도로-곡선부도로-진출부 직선도로로 구분하여 각 차량의 속도를 산출하였다. 평면곡선부의 자유속도변화와 기하구조의 영향을 분석하기 위해 선행차량에 의해 영향을 받지 않는 속도를 이용하였다. 이러한 곡선부에서 주행하는 차량의 자유속도를 통해 곡선반경별 최저속도와 그 속도가 나타나는 위치를 분석하였고, 해당 도로구간의 교통사고자료를 비교·분석하여 평면곡선 내의 속도변화와 교통사고발생간의 관계를 규명하였다 연구 결과는 다음과 같다. 첫째, 운전자들은 곡선시작지점에 도착하기 전에 충분히 속도를 줄이고, 곡선부에서 가장 낮은 속도가 나타나는 위치는 곡선내에서 나타난다. 이는 운전자의 시거에 의한 영향이다 둘째, 곡선부에서의 속도변화폭이 클수록 사고위험성은 크고, 실제 교통사고 발생건수도 높다. 본 연구의 결과를 통해 도로 주행의 안전성을 고려한 평가지표를 개발할 수 있으며, 이는 일관성 있는 도로설계를 이루게 한다.