• 제목/요약/키워드: spectrum requirements

검색결과 169건 처리시간 0.029초

T-50 전기체 내구성시험 시험하중 설계기술 연구 (A Study on the Test Load Simulation Technique for T-50 Full Scale Durability Test)

  • 정재권;이기범;양명석;설창원
    • 한국항공우주학회지
    • /
    • 제32권3호
    • /
    • pp.82-87
    • /
    • 2004
  • 항공기 구조 개발에 관련된 MlL-HDBK-1530 에는 구조 건전성을 확보하기 위한 요구사항이 기술되어있다. 기체 구조의 내구성 및 손상허용성은 요구항목 중의 하나로서 관련 규격서의 요구조건과 절차에 따라 해석 및 시험을 통하여 입증되어야 한다. 본 논문에서는 T-50 항공기 (고등 훈련기)의 안전성 및 내구성 평가를 위한 전기체 내구성 시험하중 설계에 대하여 기술하였다. 내구성 시험하중 설계는 대한민국 공군과 미군사규격서의 요구조건 및 절차에 따라 수행되었다. 실제 비행상태 구현을 위한 전기체 부유식 시험조립 기법과 비행대비행 하중 스펙트럼의 모든 하중을 정확하게 모사 할 수 있는 시험 하중 최적화 기법 및 6-자유도 평형기법을 개발하여 적용하였다. 개발된 기법은 향후 항공기 전기체 구조시험을 수행하는데 있어서 유용한 시험하중 설계 기법임을 확인하였다.

WCDMA를 기반으로 한 IMT-2000시스템의 무선망 엔지니어링 툴의 개발 (Development of a Wireless Engineering Tool for IMT-2000 System Based on WCDMA)

  • 정회영;이인웅;조병헌;임재봉;오하령;성영락
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
    • /
    • pp.201-204
    • /
    • 2000
  • In this paper, a wireless engineering field tool based on WCDMA is designed and implemented. Emerging requirements for higher rate data service and better spectrum efficiency are identified for the third generation mobile radio systems. The proposed WCDMA field tool is used for improving the quality of WCDMA service. The current position and time are measured and recorded with CDMA field data. With the system a user can observe the spatial distribution of the field data. For providing concurrency, the system is decomposed of four units and each unit is implemented by using threads.

  • PDF

M-1-1 Cooperative Protocol Based on OSOC-SS to Improve Bandwidth Utilization in USN

  • Kong, Hyung-Yun;Hwang, Yun-Kyeong
    • Journal of electromagnetic engineering and science
    • /
    • 제8권2호
    • /
    • pp.41-46
    • /
    • 2008
  • A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

개인속성 정보의 결합을 통한 강화된 인증방안에 대한 연구 (The Study on the Enhanced User Authentication using the Combination of Individual Attribute)

  • 김태경
    • 디지털산업정보학회논문지
    • /
    • 제10권2호
    • /
    • pp.83-89
    • /
    • 2014
  • An increasing number of children are now using the Internet. They are starting at a younger age, using a variety of devices and spending more time online. It becomes an important problem to protect the children in online environment. The Internet can be a major channel for their education, creativity and self-expression. However, it also carries a spectrum of risks to which children are more vulnerable than adults. In order to solve these problems, we suggested a binding model of user attributes for enhanced user authentication. We also studied the requirements and prerequisites of a binding model of user attributes. In this paper we described the architecture of binding model of user attributes and showed the effectiveness of the suggested model using simulation. This model can be utilized to enhanced user authentication and service authorization.

모듈화 구조에 따른 제조 시스템 변화성 (Changeability of manufacturing system through modular structure)

  • 박홍석;이규봉
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2005년도 춘계학술대회 논문집
    • /
    • pp.195-198
    • /
    • 2005
  • Besides strong customer orientation, today's companies should respond increasingly to a market getting worse for securing competitiveness with a diversity of product spectrum. In these new conditions in the surrounding field of manufacturing, the changeability of manufacturing system develops more and more to the key success factor. The following contributions introduce a fast and cost-efficient concept for changeover which bases on a modular system's architecture. The modular structure of manufacturing system allows the required changing processes with limited side effects on other modules. Based on a modular concept, manufacturing systems can be easily configured and reconfigured to specific requirements.

  • PDF

동일 송신소의 FM 채널 이격조건 연구 (Regulations on Channel Separation for Co-Sited FM Transmitters)

  • 허영태;김광의;권원현
    • 한국통신학회논문지
    • /
    • 제36권2B호
    • /
    • pp.141-147
    • /
    • 2011
  • 본 연구에서는 국내 FM 방송 가용주파수 확보 가능성을 확인하기 위하여 600kHz 채널이격 간격에 대한 동일 송신소 이격실험을 실시하였다. 통일 송신소에서 주파수를 600kHz로 이격할 경우, 수신기를 통한 주관적 음질평가, 전계강도 등의 특성이 비교적 양호한 것으로 평가되어 사전 시뮬레이션 및 충분한 Field Test 등의 사전 분석을 통해 사용할 수 있음을 확인하였다.

전파기술의 AI 적용 동향 및 전망 (Trends in and Forecasting of AI-Based Radio Wave Technology)

  • 전순익;김윤배;김병찬;유성진;이주열;변우진
    • 전자통신동향분석
    • /
    • 제35권5호
    • /
    • pp.69-82
    • /
    • 2020
  • In many technologies, artificial intelligence (AI) is becoming an important topic for areas based on the field of big data. However, applied AI cases and the research status of radio wave technology are not widely known to the public. The spread of AI to other areas is being followed by radio wave technologies, and much effort is being taken to evolve it into intelligent radio wave technologies in the future. This paper presents the recent areas of interest in radio wave technology, such as spectral sharing, illegal spectrum monitoring, radar detection, radio wave medical imaging, and channel modeling; examines the requirements for applying AI; and describes the applied cases, research trends, and standardization efforts that apply AI technology to them. On this basis, we will discuss the prospects of AI application to the expected radio wave technology of the future.

신한옥 건설통합정보화를 위한 표준정보분류 및 사업번호체계 (Standard Classifications and Project Numbering System for Integrated Construction Management of Modernized Korean Housing (Hanok))

  • 정영수;김우중;하지원
    • 한국CDE학회논문집
    • /
    • 제17권4호
    • /
    • pp.225-233
    • /
    • 2012
  • A comprehensive research effort in order to develop and disseminate modernized Korean housing (Hanok) has recently been initiated by Korean government. This large scale research project encompasses a wide spectrum of housing development including public policy, architectural plans, modules, construction materials and methods, prefabricated assemblies, automated production, construction management, and advanced information systems. For the purpose of integrating and automating the whole processes from an industry perspective, it is of great importance to develop a standard classification system and project numbering system (PNS) for the modernized Korean housing. This paper focuses on the standard classification systems and PNS for cost and schedule control. The distinct characteristics and managerial requirements were explored and embedded into the proposed classifications for modernized Hanok.

초 광대역용 PLL 설계에 관한 연구 (A Study on PLL Design for Ultra Wideband)

  • 이용우;이일규;오승엽
    • 한국인터넷방송통신학회논문지
    • /
    • 제10권4호
    • /
    • pp.193-198
    • /
    • 2010
  • 본 연구에서는 초 광대역에서 적용 가능한 저위상 잡음 PLL의 구조개선, 회로 보완, 설계 및 구현 방법 개선 등을 통해 초 광대역에서 저위상 잡음 특성을 갖는 PLL을 분석하고 성능 요구 규격을 만족하는 PLL 구현에 대해 소개하였다. 시뮬레이션을 통해 초 광대역 시스템용 PLL의 파워 특성, 위상잡음, 하모닉 특성 등을 분석하였고 이를 토대로 저위상 잡음을 갖는 PLL을 구현하였다. 성능 측정결과를 통해 제시한 요구 규격을 만족 시키는 PLL의 구현을 확인하였다.

A New Group Key Management Protocol for WSN

  • ;이상민;박종서
    • 융합보안논문지
    • /
    • 제8권1호
    • /
    • pp.143-152
    • /
    • 2008
  • Sensor networks have a wide spectrum of military and civil applications, particularly with respect to security and secure keys for encryption and authentication. This thesis presents a new centralized approach which focuses on the group key distribution with revocation capability for Wireless Sensor Networks. We propose a new personal key share distribution. When utilized, this approach proves to be secure against k-number of illegitimate colluding nodes. In contrast to related approaches, our scheme can overcome the security shortcomings while keeping the small overhead requirements per node. It will be shown that our scheme is unconditionally secure and achieves both forward secrecy and backward secrecy. The analysis is demonstrated in terms of communication and storage overheads.

  • PDF