• Journal of applied mathematics & informatics
• /
• 제20권1_2호
• /
• pp.557-567
• /
• 2006

This paper proves the invariability of reachable sets for the linear control system with positive isolated spectrum points in case where the principal operator generates $C_0-semigroup$ and derives the approximate controllability for the semilinear control system by using spectral operators with respect to isolated spectrum points.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.913-920
• /
• 1996

In this study, the counting method for multi-axial and multi-point load states was proposed. Using this counting method, the load spectrum is generated from the service load history which is measured for boom structure of excavator. Loading state for loading points of boom structure is described as a multi-dimensional state space. From this load spectrum, the stress spectrum was generated by FEM analysis using the superposition of the unit load. The cumulated damage at the severe damage point of In nm structure by the failure example is calculated by Palmgren-Miner's rule. As a result of this study, the fatigue life estimation using the multi-axial and multi-point load counting method is useful.

• Applied Biological Chemistry
• /
• 제16권1호
• /
• pp.12-17
• /
• 1973

냉동시킨 마늘로부터 Alliin을 분리(分離)해서 순수한 상태(相態)로 결정화(結晶化) 시켰다. 분리(分離)된 Alliin의 순도(純度)는 융점측정과 thin-layer chromatography에 의하여 확증되었다. Sulfoxide bond 및 아미노산의 기능기는 IR spectrum에 의하여, vinyl 결합은 NMR spectrum에 의하여 확인되었다. 분자량, allyl 및 기타의 결합은 MS spectrum에 의하여 확인(確認)되었다.

• 대한기계학회논문집
• /
• 제19권1호
• /
• pp.284-291
• /
• 1995

This paper proposes a method for determination of optimal reference spectrum in random vibration control. The least square method is used to minimize the spectrum deviation between the specified reference spectrum and spectra at the specimen-mounted points. This method needs only the measured FRF's at the control point and specimen-mounted points in pre-vibration test. Using the proposed method as reference spectrum, it is possible to easily predict spectra at the specimen-mounted points, and also to reduce overtest resulting from dynamic characteristics of shaker and fixture. This method is shown through theoretical and experimental results to be an effective method.

• 한국전산구조공학회논문집
• /
• 제27권6호
• /
• pp.501-508
• /
• 2014

본 논문에서는 질점계 비선형 지진응답해석을 통한 역량스펙트럼 도출방법을 소개한다. 일반적인 건축물의 손상도 평가는 비선형 등가정적해석(Push-over Analysis)을 통하여 건축물의 역량스펙트럼을 도출하고, 역량스펙트럼과 요구스펙트럼의 교차점을 성능점으로 평가하고 있다. 등가정적해석은 지진의 영향을 등가의 정적하중으로 환산한 후 이를 이용하여 정적해석을 수행함으로써 구조물의 지진에 의한 거동을 예측하는 방법이다. 이 방법은 고차모드 및 층별 동특성의 영향을 고려할 수 없다. 따라서 건축물의 동특성이 반영된 역량스펙트럼을 산출하기 위하여 질점계 비선형 지진응답해석을 진행하여 건축물의 역량 스펙트럼을 제안하고자 한다.

• 한국전산구조공학회논문집
• /
• 제30권6호
• /
• pp.523-530
• /
• 2017

본 연구에서는 역량스펙트럼법을 이용해 얻어진 구조물의 성능점을 확률적으로 평가하는 방법을 제시하였다. ATC-40에 따라 역량스펙트럼법을 이용하여 4층 1경간 철골구조물의 성능점을 산정하였다. 요구스펙트럼을 이용하여 구조물의 성능한계를 초과하는지 여부를 분석하기 위해 구조부재의 소성변형각으로부터 정의되는 구조물의 성능한계에 대해 한계변위를 도출하였다. 또한 설계응답스펙트럼과 유사한 응답스펙트럼을 가지는 인공지진파 30개를 선정하여 스펙트럼 가속도에 따른 각 성능한계의 초과여부를 통해 fragility curve를 도출하였다. 관측된 초과확률을 이용하여 fragility curve를 도출하기 위해 maximum likelihood method를 사용하였다. 각 성능한계점에 대응하는 설계응답스펙트럼의 응답가속도값에서 성능한계점을 초과할 확률은 존재하는 것으로 확인되었다. 본 방식은 구조물의 성능점에 대해 지진파의 불확실성을 고려한 확률적 평가가 가능하고, 시간증분해석이 필요하지 않아 해석시간을 상당부분 단축시킬 수 있다는 장점이 있다.

• Structural Engineering and Mechanics
• /
• 제41권6호
• /
• pp.759-773
• /
• 2012

The objective of this paper is to present an energy-based method for calculating target displacement of RC structures. The method, which uses the Newmark-Hall pseudo-velocity spectrum, is called the "Pseudo-velocity Spectrum (PSVS) Method". The method is based on the energy balance concept that uses the equality of energy demand and energy capacity of the structure. First, nonlinear static analyses are performed for five, eight and ten-story RC frame structures and pushover curves are obtained. Then the pushover curves are converted to energy capacity diagrams. Seven strong ground motions that were recorded at different soil sites in Turkey are used to obtain the pseudo-acceleration and the pseudo-velocity response spectra. Later, the response spectra are idealised with the Newmark-Hall approximation. Afterwards, energy demands for the RC structures are calculated using the idealised pseudo-velocity spectrum. The displacements, obtained from the energy capacity diagrams that fit to the energy demand values of the RC structures, are accepted as the energy-based performance point of the structures. Consequently, the target displacement values determined from the PSVS Method are checked using the displacement-based successive approach in the Turkish Seismic Design Code. The results show that the target displacements of RC frame structures obtained from the PSVS Method are very close to the values calculated by the approach given in the Turkish Seismic Design Code.

• 한국수학교육학회지시리즈A:수학교육
• /
• 제48권4호
• /
• pp.443-454
• /
• 2009

This study reviewed the notion and strategies of mathematical creativity from two point of view, mathematics and creativity. By these reviews, the spectrum was presented as frame of mathematical creativity task. Creativity and mathematics were seen as polar opposites and mathematical creativity task fit clearly at various points in this spectrum. Some focused on the quantity of ideas and originality from creative point of view. On the other hand, some focused on reasoning, insight, and generalization from mathematical point of view. The tasks on the spectrum were served as the vehicle of mathematical creativity and mathematics classroom. Therefore, there were some specific suggestions that mathematics classroom could be made a place where students and teachers would be able to foster their mathematical creativity.

• 음성과학
• /
• 제10권4호
• /
• pp.137-147
• /
• 2003

Speech synthesis can classify by synthesis way, that is waveform coding, source coding and mixture coding. Specially, waveform coding is suitable for high quality synthesis. However, it is not desirable by synthesis techniques of syllable or phoneme unit because it do not separate and handles excitation and formant part. Therefore, there is a need for pitch alteration method applied in synthesis by the rule in waveform coding. This study propose about pitch alteration method that use spectrum scaling after do to flatten spectra by subband linear approximation to minimize spectrum distortion. This paper show evaluation whether show excellency of some measure compared with LPC, Cepstrum, lifter function and method that propose. estimation method seeks distribution of each flattened signal and measured degree of flattened spectra Signal flattened is normalized, So that highest point amounts to zero, and distribution of signal ,whose average is zero, is calculated. this show result that measure the spectrum distortion rate to estimate performance of method that propose. The average spectrum distortion rate was kept below the average 2.12%, so the method that propose is superiors than existent method.

• 한국공간구조학회:학술대회논문집
• /
• 한국공간구조학회 2006년도 춘계 학술발표회 논문집 제3권1호(통권3호)
• /
• pp.49-57
• /
• 2006

Performance based seismic design is a very efficient method in evaluating the seismic capacity of building. In this study, the method estimating the performance point of the spatial structures based on capacity spectrum method(CSM) is proposed. And for efficient evaluation for the performance point of the spatial structures, the algorithm to convert spatial structural system to ESDOF system is proposed. Its efficiency is confirmed by comparing with time history analysis of full model. And dynamic behaviors of spatial structures are examined by using this method. At last, evaluation of structural performance according to variation of stiffness after plastic deformation is carried out.