1 |
ATC (1996), Seismic Evaluation and Retrofit of Concrete Buildings, ATC-40, Applied Technology Council, Redwood City, CA.
|
2 |
Chopra, A.K. (1995), Dynamics of Structures, Theory and Applications to Earthquake Engineering, Prentice-Hall, New Jersey.
|
3 |
Fajfar, P. and Fischinger, M.A. (1990), "Seismic procedure including energy concept", Proceedings of IX ECEE, Moscow.
|
4 |
Fajfar, P. and Vidic, T. (1994), "Consistent inelastic design spectra: Hysteretic and input energy", Earthq. Eng. Struct. D., 23(5), 523-537.
DOI
ScienceOn
|
5 |
Fajfar, P. and Gaspersic, P. (1996), "The N2 method for the seismic damage analysis of RC buildings", Earthq. Eng. Struct. D., 25(1), 31-46.
DOI
|
6 |
Fajfar, P. (2000), "A nonlinear analysis method for performance based seismic design", Earthq. Spectra, 16(3), 573-592.
DOI
ScienceOn
|
7 |
FEMA (2000), Prestandard and Commentary for the Seismic Rehabilitation of Buildings, FEMA 356, American Society of Civil Engineers, Washington, DC.
|
8 |
FEMA (2005), Improvement of Nonlinear Static Analysis Procedures, FEMA 440, Applied Technology Council, Washington, DC.
|
9 |
Goel, R.K. and Chopra, A.K. (2001), A Modal Pushover Analysis Procedure to Estimate Seismic Demands for Buildings: Theory and Implementation, Report No. PEER-2001/03, Pacific Earthquake Research Center, University of California, Berkeley.
|
10 |
Goel, S.C., Liao, W.C. and Leelataviwat, S. (2009), "An energy spectrum method for seismic evaluation of structures", Conference on Improving the Seismic Performance of Existing Buildings and Other Structures, Applied Technology Council and the Structural Engineering Institute of ASCE, San Francisco, CA.
|
11 |
Housner, G.W. (1956), "Limit design of structures to resist earthquakes", Proceedings of the 1st World Conference on Earthquake Engineering, Oakland, California.
|
12 |
Kusuma, G., Mendis, P. and Lumantarna, B. (2004), "Performance-based seismic design using energy balance for R/C frames structures", Proceedings of ACMSM-18 Conference, Perth.
|
13 |
Kuwamura, H. and Galambos, T.V. (1989), "Earthquake load for structural reliability", J. Struct. Eng., 115(6), 1446-1462.
DOI
|
14 |
Lee, S.S. and Goel, S.C. (2001), Performance Based Design of Steel Moment Frames Using Target Drift and Yield Mechanism, Research Report, UMCEE 01-17, The University of Michigan, Department of Civil and Environmental Engineering.
|
15 |
Leelataviwat, S., Goel, S.C. and Stojadinovic, B. (2002), "Energy-based seismic design of structures using yield mechanism and target drift", J. Struct. Eng., 128(8), 1046-1054.
DOI
ScienceOn
|
16 |
Leelataviwat, S., Saewon, W. and Goel, S.C. (2008), "An energy based method for seismic evaluation of structures", Proceedings of the 14th World Conference on Earthquake Engineering: Innovation Practice Safety, Bejing, China.
|
17 |
Leelataviwat, S., Saewon, W. and Goel, S.C. (2009), "Application of energy balance concept in seismic evaluation of structures", J. Struct. Eng., 135(2), 113-121.
DOI
ScienceOn
|
18 |
Lin, Y.Y., Chang, K.C. and Wang, Y.L. (2004), "Comparison of displacement coefficient method and capacity spectrum method with experimental results of RC columns", Earthq. Eng. Struct. D., 33(1), 35-48.
DOI
ScienceOn
|
19 |
Liao, W.C. (2010), "Peformance-based plastic design of earthquake resistant reinforced concrete moment frames", Ph.D. Thesis, University of Michigan.
|
20 |
Mander, J.B., Priestley, M.J.N. and Park, R. (1988), "Theoretical stress-strain model for confined concrete", J. Struct. Eng., 114(8), 1804-1826.
DOI
ScienceOn
|
21 |
Manfredi, G. (2001), "Evaluation of seismic energy demand", Earthq. Eng. Struct. D., 30(4), 485-499.
DOI
ScienceOn
|
22 |
Newmark, N.M. and Hall, W.J. (1982), Earthquake Spectra and Design, Earthquake Engineering Research Institute, Berkeley, California.
|
23 |
Panagiotakos, T.B. and Fardis, M.N. (2001), "A displacement-based seismic design procedure for RC buildings and comparison with EC8", Earthq. Eng. Struct. D., 30(10), 1439-1462.
DOI
ScienceOn
|
24 |
Park, H.G. and Eom, T.S. (2006), "A simplified method for estimating the amount of energy dissipated by flexure dominated reinforced concrete members for moderate cyclic deformations", Earthq. Spectra, 22(3), 459-490.
DOI
|
25 |
Sullivan, T.J., Priestly, M.J.N. and Calvi, G.M. (2006), Seismic Design of Frame-Wall Structures, Research Report No. ROSE-2006/02, European School for Advanced Studies in Reduction of Seismic Risk, Pavia, Italy.
|
26 |
SAP2000 Nonlinear, Version 14.2, Structural Analysis Program (2010) Computers and Structures Inc., Berkeley CA.
|
27 |
Strong Ground Motion Database of Turkey, http://www.deprem.gov.tr.
|
28 |
Sucuoglu, H. and Nurtug, A. (1995), "Earthquake ground motion characteristics and seismic energy dissipation", Earthq. Eng. Struct. D., 24(9), 1195-1213.
DOI
ScienceOn
|
29 |
Surahman, A. (2007), "Earthquake-resistant structural design through energy demand and capacity", Earthq. Eng. Struct. D., 36(14), 2099-2117.
DOI
ScienceOn
|
30 |
Turkish Seismic Design Code (2007), Ministry of Public Works and Settlement, Ankara.
|
31 |
Turkish Standard Institute TS500 (2000), Requirements for Design and Construction of Reinforced Concrete Structures, Ankara, Turkey.
|
32 |
Uang, L. and Bertero, C. (1998), Energy Based Design Parameters in Performance Approach, Seismic Research Letters, 123-134.
|
33 |
XTRACT V.3.0.7 (2006), Imbsen Software Systems, Sacramento.
|
34 |
Zahrah, T.F. and Hall, W.J. (1984), "Earthquake energy absorption in SDOF structures", J. Struct. Eng.-ASCE, 110(8), 1757-1772.
DOI
ScienceOn
|