• 한국방재학회:학술대회논문집
• /
• 한국방재학회 2008년도 정기총회 및 학술발표대회
• /
• pp.241-244
• /
• 2008

The decomposition of incident and reflected wave on the two-dimensional experimental flume is very important to elucidate the phenomena between waves and coastal structure such as submerged breakwater or rubble-mound breakwater. In generally, two or three point methods are widely used to decompose waves. Even though three point method gives more accurate result, it requires more wave gauge to install than two point method. Sometimes, this causes economic or measurement problems. In this study, therefore, the applicability of two point method was investigated by using Eigenfunction expansion method.

• 한국해안·해양공학회논문집
• /
• 제25권3호
• /
• pp.147-153
• /
• 2013

파력변환장치에는 여러 가지 형식이 있으며 지점흡수식이 가장 많이 연구되고 있다. 하지만, 국내외적으로 진동형 전력부이 형식의 설계를 위한 계통적 실측자료 분석 예는 찾기가 어렵다. 본 연구는 권 등(2010)에 의해 제안된 지점흡수식인 공진형 파동에너지 추출시스템에 작용하는 파랑외력을 산정하고자 한다. 본 연구는 경북 동해안에 위치한 후 포항 북방파제 전면수역에서 수압식 파고계를 이용하여 약 3년동안 관측한 자료(2002년 5월 1일~2005년 3월 29일)를 대상으로 시계열 스펙트럼을 분석하였다. 분석결과, 월별주기변동과 파고변동이 뚜렷하게 나타나며 월별 파력이 년 간 불균등하게 분포함을 알았다. 상시파랑의 평균 파형경사는 풍파영역인 0.02-0.04보다 작은 0.01이였다. 년 중 파의 평균주기의 최빈값은 5.31 sec 이며 본 주기에 해당하는 파고 중 최빈 파고는 0.32m이다. 첨두 주기의 발생확률은 이산형(bi-modal)으로 나타나며 4.47 sec와 6.78 sec에서 mode값을 보인다. 설계주기는 이러한 4개의 값으로부터 선택할 수 있다. 파고는 1m 이하가 약 95%를 차지하고 있다. 본 연구를 통하여 파력이 미약한 해역에서는 공진형 파력 시스템이 필요하며 파력의 월별 불균등 분포를 극복하기 위한 최적설계가 전력생산단지(Wave Energy Farm) 형성을 위한 주요한 과제임을 알았다. 본 연구는 상시파랑의 평균스펙트럼에 대하여 표준스펙트럼으로 표현이 불가능하여 3개의 매개변수로 표현이 가능한 새로운 스펙트럼형을 제안하였으며 파력부이에 의한 전력생산 예측과 피로해석을 위한 기본 자료를 제공할 수 있다.

• 중국학논총
• /
• 제66호
• /
• pp.161-188
• /
• 2020

The purpose of this paper is to analyze the debate on the Lewisian turning point in China. Despite the heated debate and accumulating research results both inside and outside China, the results showed a very complex spectrum. Different results were presented depending on which criteria the researcher selected, which analytical tools were used, and which data were utilized. Territory of China is vast, and the differences in economic basement and development stages between regions are not only severe, but also the economic gap among areas in a region is big. Therefore, it is difficult to have a significant meaning in analyzing the Lewisian Turning Point China as a whole. In addition, China's industrial production and labor force structure remain very unbalanced. This can be said to be due to the fact that the allocation and relocation of labor force according to the stage of economic development has not been achieved reasonably, and so it confuses the task of determining whether the Lewis Turning Point has arrived of not.

• 소음진동
• /
• 제9권1호
• /
• pp.85-96
• /
• 1999

For ASME Code pumps in nuclear power plants, inservice test is required to assess the operational readiness in accordance with ASME code and related regulations. The objective of this study therefore, is to develop the technical background of the degradation of pump performances and conditions due to low flow rate operation. In addition. the detection techniques of pump operating conditions are to be developed to enhance the safety and economy of nuclear power plants. A test loop consisted of pump, motor. water tank, flow rate measurements and piping system with flow control devices was established for this study. Two typical pumps, 1-stage volute pump and 3-stage turbine pump, were selected and the test was performed upon two major point of views ; i.e., pump discharge pressure pulsations analysis and pump vibration spectrum analysis. From the test results, it is concluded that (1) the pump vibration affected by the natural frequency of operating pump is significant in the low frequency zone (around 1 Hz) : the vibration amplitude. especially. is an important factor during low flow rate operation. and shall be monitored to ensure that it is within the limit of ASME OM code Part 6, (2) the vibration frequency and pump discharge pressure are affected by vane pass frequency and running speed, (3) the wave phenomena due to the compressiblity of water is anticipated during low flow rate operation. and the pump system shall be designed to prevent it and. finally, (4) the technical background of the degradation of pump performances and conditions due to low flow rate operation is provided.

• 한국식생활문화학회지
• /
• 제9권2호
• /
• pp.131-136
• /
• 1994

한국산 씀바귀(Lactuca dentata Makino)의 ethylacetate 추출물에서 6 종류의 flavonoid 성분이 TLC에 의해서 검출 되었으며, 이들은 극성에 따라서 A에서 F가지 명명되었다. 그들 중 주성분으로 생각되는 물질 E를 column chromatography을 이용하여 분리정제 하였다. 물질 E의 녹는 점은 $249.5^{\circ}C-251^{\circ}C$ 로 나타났으며, 그 구조를 밝히기 위하여, 물질 E와 이를 가수분해한 genin에 대한 여러가지 shift reagent에서 UV와 IR분석을 하고 또한 물질 E와 그의 acetyl 유도체에 대한 NMR 분석을 하였으며 물질 E에 결합된 당은 TLC에 의하여 확인하였다. 이와같은 분석 결과에서 물질 E는 luteolin 모핵에 glucose가 결합된 $luteolin-7-0-{\beta}-D-glucoside$로서 확인되었다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권12호
• /
• pp.4835-4855
• /
• 2015

TV white space (TVWS) is showing promise to become the first widespread practical application of cognitive technology. In fact, regulators worldwide are beginning to allow access to the TV band for secondary users, on the provision that they access the geolocation database. Device-to-device (D2D) can improve the spectrum efficiency, but large-scale D2D communications that underlie TVWS may generate undesirable interference to TV receivers and cause severe mutual interference. In this paper, we use an established geolocation database to investigate the power allocation problem, in order to maximize the total sum throughput of D2D links in TVWS while guaranteeing the quality-of-service (QoS) requirement for both D2D links and TV receivers. Firstly, we formulate an optimization problem based on the system model, which is nonconvex and intractable. Secondly, we use an effective approach to convert the original problem into a series of convex problems and we solve these problems using interior point methods that have polynomial computational complexity. Additionally, we propose an iterative algorithm based on the barrier method to locate the optimal solution. Simulation results show that the proposed algorithm has strong performance with high approximation accuracy for both small and large dimensional problems, and it is superior to both the active set algorithm and genetic algorithm.

• 대한치과보철학회지
• /
• 제44권3호
• /
• pp.333-342
• /
• 2006

Statement of problem. Although many studies have been carried out to investigate the correlation between the degree of conversion and the flexural strength of composite resins, there is minimal information in the literature attempting to compare degree of conversion, flexural strength and their correlation between restorative composite resins and flowable composite resins. Purpose. The purposes of this study were to measure the degree of conversion and flexural strength of composite resins with different rheological behavior and to correlate the two properties. Materials and methods. Four restorative (Vit-1-escence, Z-250, Tetric ceram, Esthet-X) and four flowable (Aeliteflo, Admiraflow, Permaflo, Revolution) light-curing composite resins were investigated. The degree of conversion(DC) was analyzed with Fourier transfer infra-red spectroscopy(FTIR) spectrum by a potassium bromide(KBr) pellet transmission method. The spectrum of the unpolymerized specimen had been measured before the specimen was irradiated for 60s with a visible light curing unit. The Poiymerized specimen was scanned for its in spectrum. The flexural strength(FS) was measured with 3-point bending test according to ISO 4049 after storage in water at $37^{\circ}C$ for 24 hours. The data were statistically analyzed by an independent sample t-test and one-way ANOVA at the significance level of 0.05. The dependence of flexural strength on the degree of conversion was also analyzed by regression analysis. Results. Mean DC and FS values ranged from 43% to 61% and from 84.7MPa to 156.7MPa respectively. DC values of the flowable composite resins were significantly higher than those of restorative composite resins (P < 0.05). The FS values of restorative composite resins were greater than those of flowable composite resins. No statistically significant correlation was observed between the DC and the FS tested in any of the composites. The dependence of FS on DC in restorative or flowable composite resins was not significant. Conclusion. It can be concluded that radical polymerization of the organic matrix is not a major factor in determining flexural strength of the commercially available composite resins.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.351-361
• /
• 2006

The fatigue strength analysis of VLFS is carried out by using a 3-dimensional plate finite element model with a zooming technology which performs the modeling of wide portions of the structure by a coarse mesh but the concerned parts by a very fine mesh of t by t level. And a stepwise substructure modeling technique for global loading conditions is applied which uses the motion response of the global structure from 2-D plate hydroelastic analysis as the enforcing nodal displacements of the concern 3-D structural zooming model. Seven incident wave angles and whole ranges of frequency domains of wave spectrum are considered. In order to consider the effect of breakwater, the modified JONSWAP wave spectrum is used. Applying the wave data of installation region, the longterm spectrum analysis is done based on stochastic process and the fatigue life of the structure is estimated. Finally some design considerations from the view point of fatigue strength analysis of VLFS are discussed.

• 천문학회지
• /
• 제46권2호
• /
• pp.75-91
• /
• 2013

We estimate the power spectra of the cosmic microwave background radiation (CMB) temperature anisotropy in localized regions of the sky using the Wilkinson Microwave Anisotropy Probe (WMAP) 7-year data. We find that the north and south hat regions at high Galactic latitude ($|b|{\geq}30^{\circ}C$) show an anomaly in the power spectrum amplitude around the third peak, which is statistically significant up to 3. We try to explain the cause of the observed anomaly by analyzing the low Galactic latitude ($|b|$ < $30^{\circ}C$) regions where the galaxy contamination is expected to be stronger, and the regions weakly or strongly dominated byWMAP instrument noise. We also consider the possible effect of unresolved radio point sources. We find another but less statistically significant anomaly in the low Galactic latitude north and south regions whose behavior is opposite to the one at high latitude. Our analysis shows that the observed north-south anomaly at high latitude becomes weaker on regions with high number of observations (weak instrument noise), suggesting that the anomaly is significant at sky regions that are dominated by the WMAP instrument noise. We have checked that the observed north-south anomaly has weak dependences on the bin-width used in the power spectrum estimation, and on the Galactic latitude cut. We also discuss the possibility that the detected anomaly may hinge on the particular choice of the multipole bin around the third peak. We anticipate that the issue of whether or not the anomaly is intrinsic one or due to WMAP instrument noise will be resolved by the forthcoming Planck data.

• 대한조선학회논문집
• /
• 제51권2호
• /
• pp.122-129
• /
• 2014

Identification of the whipping response out of the combined wave-vibration response of a flexible sea going vessel is one of the most interesting research topic from ship designer's point of view. In order to achieve this goal, a novel methodology based on the wavelet cross-correlation technique was proposed in this paper. The cross-correlation of the wavelet power spectrum averaged across the frequency axis was introduced to check the similarity between the combined wave-vibration response and impulse response. The calculated cross-correlation of the wavelet power spectrum was normalized by the auto-correlation of the each spectrum with zero time lag, eventually providing the cross-correlation coefficient that stays between 0 and 1, precisely indicating the existence of the impulse response buried in the combined wave-vibration response. Additionally, the weight function was introduced while calculating the cross-correlation of the two spectrums in order to filter out the signal of lower frequency so that the accuracy of the similarity check becomes as high as possible. The validity of the proposed methodology was checked through the application to the artificially generated ideal combined wave-vibration signal, together with the more realistic signal obtained by running 3D hydroelasticity program WISH-Flex. The correspondence of the identified whipping instances between the results, one from the proposed method and the other from the calculated slamming modal force, was excellent.