• The Journal of the Korea Contents Association
• /
• v.16 no.7
• /
• pp.681-688
• /
• 2016

This study assess their quality of radiation on analysis of the spectrum of resolution suggesting IEC 61267 in radiation quality that RQA3, RQA5, RQA7, RQA9 and combination of clinical condition using several quality of radiation. In experiments edge method first, the spatial resolution assessment used image of the additional filter and SID is obtained the IEC 62220-1, spatial resolution and sharpness of the obtained image was evaluated in the MTF value 10%(0.1), MTF value 50%(0.5) using a Matlab program. Second, MCNPX simulation used spatial resolution analysis was radiation quality particle fluence and spectrum analysis in energy. As a result, make use of additional filter, image quality evaluation of SID that RQA3 radiation quality combination qualification is higher spatial resolution and sharpness make unused of additional filter and SID 100cm. RQA7 radiation quality combination qualification is higher that spatial resolution make unused of additional filter and SID 150cm. RQA9 radiation quality combination qualification is higher that spatial resolution and sharpness make used of additional filter and SID 180cm. spectrum analysis of radiation quality by reducing consequent errors occurring in the experiment that error due to the reproducibility of the X-ray tube, occur in an error of correction the detector suggest ideal conditions from spectrum analysis through MCNPX simulation. In conclusion, by suggesting spatial resolution and sharpness of result for various radiation quality, It provide basic data that radiation quality condition and quantitative assessment method for laboratory in clinical using detector evaluation.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2005.11a
• /
• pp.349-349
• /
• 2005

• Proceedings of the KIEE Conference
• /
• 2000.07c
• /
• pp.2162-2164
• /
• 2000

In this paper, it is analysed the spectrum of optical fiber output through a sunlight collector system. Also the lighting environments under the optical fiber bundles are predicted when applied to interior lighting by using a simulation program. As the result its feasibility as an interior lighting source shows any serious problem except the system cost.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.953-961
• /
• 2013

In this study, the analyzed turbine is a 5MW upwind-type wind turbine. This conceptual model was made to compare the results of the numerical analysis program in the IEA Annex23 Subtask2 OC3 project. The numerical analysis program used in this study is FAST developed by NREL and AQWA of ANSYS. Motion characteristics, such as RAO, average motion, significant motion and average amplitude of 1/10 highest motion were obtained through the numerical analysis. The results of the numerical analysis were compared with the results of other numerical analyses and the experimental results, and all the results agreed with one another. The results will help resolve the fundamental design trade-offs between basic floating system concepts.

• Journal of Radiation Protection and Research
• /
• v.41 no.1
• /
• pp.41-47
• /
• 2016

Background: For the accurate dose assessment in radiation therapy, energy spectrum of the photon beam generated from the linac head is essential. The aim of this study is to develop the technique to accurately unfolding the energy spectrum with the transmission analysis method. Materials and Methods: Clinical linear accelerator and Monet Carlo method was employed to evaluate the transmission signals according to the thickness of the observer material, and then the response function of the ion chamber response was determined with the mono energy beam. Finally the energy spectrum was unfolded with HEPROW program. Elekta Synergy Flatform and Geant4 tool kits was used in this study. Results and Discussion: In the comparison between calculated and measured transmission signals using aluminum alloy as an attenuator, root mean squared error was 0.43%. In the comparison between unfolded spectrum using HEPROW program and calculated spectrum using Geant4, the difference of peak and mean energy were 0.066 and 0.03 MeV, respectively. However, for the accurate prediction of the energy spectrum, additional experiment with various type of material and improvement of the unfolding program is required. Conclusion: In this research, it is demonstrated that unfolding spectra technique could be used in megavoltage photon beam with aluminum alloy and HEPROW program.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.7
• /
• pp.893-901
• /
• 2017

In order to understand the fluctuation characteristics of water temperature in August, water temperature, tide level, air temperature and wind data were analyzed using a power spectrum and coherence analysis for a region off the southern coast of Korea. Spectrum analysis showed that the water temperature and tide level in Wando, Goheung, Yeosu, Tongyeong and Masan have peaks over a semi-diurnal period. Coherence showed that water temperature was affected by tide in Wando, Goheung, Yeosu and Tongyeong where tidal range is relatively high. In Masan and Busan, where tidal range is relatively low, however, the tide did not affect water temperature significantly. In particular, wind was the most important factor in relation to water temperature in Masan. Time lags were calculated from phase. In Wando, water temperature decreased 1.5 hrs after a flood tide began. Water temperature decreased 0.3 hrs after a flood tide began in Goheung and Tongyeong. In Masan, water temperature increased 3 hrs after a south wind began. Water temperature in Yeosu was affected by tide, but air temperature, tide and wind in Busan affected water temperature very little.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.1
• /
• pp.445-453
• /
• 2013

This paper was calculated the earthquake load using ELFP(Equivalent Lateral Force Procedure) and RSA(Response Spectrum Analysis) for PSC Box Girder representative bridges by the Phase of KTX designed by ELFP and verified the difference of these analyses. It have been modeled 3 dimensional FE model of 5 bridges using a commercial FEM program for the comparison of these analyses using a commercial FEM program and were compared the earthquake load. It has been to confirm the increase of the difference ELFP of RSA calculated to seismic ground acceleration according to the ground condition and natural period. It is mean that the necessity of seismic reinforcement due to the application of a larger of earthquake load than designed earthquake load form the seismic performance evaluation result according to the difference of calculated earthquake loads.

• KSTLE International Journal
• /
• v.6 no.1
• /
• pp.17-20
• /
• 2005

The object of the present work is the natural lre%uency analysis of femto slider, HeaHdisk interaction during starustop and constant speed were detected by using the acoustic emission (AE) test system. The frequency spectrum analysis wasperformed using the AE signal obtained during the head/disk interaction. The FFT (Fast Fourier Transform) analysis of the AEsignals is used to understand the interaction between the AE signal and the state of contact. Natural frequency analysis wasperformed using the ANSYS program. The results indicate acceptable accordance of finite element calculation results with theexperimental results.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2000.10a
• /
• pp.63-68
• /
• 2000

Concrete is popular as a building material, however it is inherently brittle and performs poorly during earthquakes if nor reinforced properly. Traditional retrofit design techniques assume that buildings respond elastically to earthquakes. This assumption simplifies the analysis procedure but can lead to an erroneous conclusion. The complete nonlinear time history analysis is considered overly complex and impractical for general use. Simplified nonlinear analysis methods, referred to as nonlinear static analysis procedures, include the capacity spectrum method(CSM) developed in detail at ATC-40 and the displacement coefficient method(DCM) utilized at FEMA-273. In this study wall APT system. The results were compared and analyzed. The program used was neaMAX-3D to express nonlinear material.

• KSTLE International Journal
• /
• v.5 no.1
• /
• pp.28-31
• /
• 2004

The object of the present work is the natural frequency analysis of subambient pressure tri-pad and pico sliders. Head/disk interaction during start/stop and constant speed were detected by using the acoustic emission (AE) test system. The frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction. The FFT (Fast Fourier Transform) analysis of the AE signals is used to understand the interaction between the AE signal and the state of contact. Natural frequency analysis was performed using the Ansys program. The results indicate acceptable accordance of finite element calculation results with the experimental results.