• 한국해안·해양공학회논문집
• /
• 제29권5호
• /
• pp.269-277
• /
• 2017

최근, 해변모래의 침식을 방지하기 위해 잠제를 설치하고 있다. 잠제설치는 모래 침식의 손실을 최소화하기 위해 만들어졌다. 이런 이유로, 잠제를 무분별하게 전국적으로 계획하여 건설하고 있다. 그러나 해안선 유지를 위해 설치된 잠제는 상당히 문제가 있는 방법이다. 고가의 건설비, 해양공간이용, 해수수질, 해안선 변화 등의 단점도 있다. 특히, 해양 레저를 즐기는 이용자들은 해상공간이 단절되기 때문에 이를 좋아하지 않는다. 광안리와 같은 해수욕장은 인위적으로 양빈모래를 공급하여 해수욕장을 유지하는 곳이다. 연성공법이란 양빈모래의 유실방지를 위해 수중에 잠재를 대신하여 유동성 재질로 폭 넓은 연성구조물을 설치하는 공법을 말한다. 본 연구는 해변 침식을 완화할 수 있는 연성공법의 일환으로 cell group을 설치하였다. 즉, 양빈모래의 유실을 막기 위해 잠제 대신에 cell group을 사용하여 사빈침식의 정도를 완화 할 수 있는 공법을 적용한 것이다. 2차원 고정상 실험에서 cell group의 설치로 인한 파고감소효과 및 저반사율을 제시하였고, 이동상 수리모형실험에서, cell group 설치로 인한 양빈모래의 포착률과 양빈 모래의 침식방지율을 제안하였다. 따라서 수리모형실험의 결과에 의하면 침식해안의 사빈에 cell group을 설치하면 파고감소효과, 저반사율과, 양빈사의 침식방지율, 양빈사의 높은 포착률에 의해 양빈사의 유출이 방지되어 안정된 해안을 유지할 수 있었다.

• 한국동물번식학회:학술대회논문집
• /
• 한국동물번식학회 2003년도 학술발표대회 발표논문초록집
• /
• pp.56-56
• /
• 2003

Beta-catenin is very important in early development including involvement in cell adhesion, cell signaling, and developmental fate specification. Cell-cell interaction is an important process during mammalian embryonic development. In preimplantation embryos, embryonic compaction is the process of increased cellular flattening and adhesion of junctional complexes and results in a polarized distribution. Beta-catenin is associated with embryonic compaction in mammals. Here, we examined the relationship between beta-catenin expression and compaction in porcine embryos derived from in vitro fertilization. First of all, we investigated beta-catenin expression in each embryonic developmental stage and also focused on expression pattern according to full, partial and non-compaction at morula stage. We used the immunocyto-chemical method in this research. To confirm compaction affects on the embryonic development, we compared between compaction and developmental rates to the blastocyst. The result showed that compaction and non-compaction rates were 14.6% and 63.8% at 4 days after IVF, respectively The developmental rates to the blastocyst and their total cell number were 50.9% vs 36.4% and 41.4$\pm$11.5 vs 26.8$\pm$12.7 in compaction and non-compaction groups. Although no difference was detected in the ratio of ICM to total cells between two groups, total cell number of the blastocysts in compaction group was superior to that of the blastocysts in non-compaction group (P<0.05). Expression of beta-catenin appeared in the boundary of membrane surface between blastomeres in 2- and 4-cell stage, and observed irregular pattern from 8-cell to blastocyst stage. We also investigated beta-catenin expression pattern according to the degree of compaction in the 3 groups; full, partial (>50%) and non-compaction. The expression signal in fully compacted embryos was stronger than those of partial and non-compacted embryos. Especially, beta-catenin expression appeared various patterns in morula stage suggesting the aberrant distribution of beta-catenin is affected by compaction patterns. Our results suggest that abnormal beta-catenin expression was affected by embryo quality and further development in porcine embryos in vitro.

• 한국의류학회지
• /
• 제25권6호
• /
• pp.1069-1078
• /
• 2001

Pattern grading is a technique used to increase or decrease the size of a garment pattern according to the measurements in a given size chart. The original pattern is graded and laid out for cutting before mass production. This study tried to classify body types for pattern grading of jacket by applying a concept of "drop"defined as the difference between chest girth and waist girth and the difference between hip girth and waist girth for pants. Data were collected through the stratified sampling method. 138 subjects were selected out of 1,290 subjects of our sample population. Findings were as follows : 1) For pattern grading of jacket, the cell with the chest girth of 96cm and the waist girth of 87cm had the highest frequency rate and body type was 87H type and the coverage of this type was 9.52%. Then, the size specification 87-96 was the center of distribution. H type had seven ones such as 72H, 75H, 78H, 81H, 84H. 87H and 90H. H type had 33 observations and frequency ratio of 26.19%. Same types could be graded up and down from the reference size for the age group. And this reference size became to the starting point for developing the grading system. 2) For pattern grading of pants, fatty types, H10 type had six ones such as 80H10. 82H10, 84H10, 86H10, 88H10 and 90H10. H10 type had 28 observations and frequency ratio of 20.29%. H6 type had 6 ones such as 84H6, 86H6, 88H6, 90H6. 92H6 and 94H6. H6 type had 27 observations and frequency ratio of 19.57%. If lower body types were classified as same ones, these types could be graded up and down proportionately.

• Journal of Pharmaceutical Investigation
• /
• 제32권2호
• /
• pp.87-93
• /
• 2002

This study is to enhance drug penetration via skin and investigate anti-inflammation effect following adoption of ultrasound. For this goal gel containing triamcinolone was prepared and the skin penetration rate and the change effects of blood plasma ingredients and serum enzyme were investigated. Using Franz type diffusion cell and the skin of hairless mouse, the permeation enhancing effect of ultrasound was tested. After the injury by direct trauma, the blood test was performed by measuring WBC, lymphocyte, and neutrophyl, and by analyzing CPK and LDH. The ultrasound transducer whose technical specification is geometric area(GA) $1.4\;cm^2$, effective radiation area(ERA) $0.8\;cm^2$, and beam non-uniformity ratio(BNR) 6.0 max was used. The influence of frequency having an effect on skin permeation rate was higher in the case of using 1MHz and continuous treatment. The temperature of receptor phase was not influenced in skin permeation by phonophoresis. Skin permeation increase attended by intensity of ultrasound, the permeation of triamcinolone was accelerated at $2.5\;w/cm^2\;than\;1.0\;w/cm^2$. Following muscle injury phonophoretic group the number of WBC, neutrophil and lympholyte were decreased significantly as compared with both control group and ultrasound group. The result of variation of serum CPK and LDH activity conformed to the phonophoretic effect as same pattern with the variation of WBC, neutrophil and lymphocyte.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1296-1299
• /
• 2002

We implemented a CD signal processor operated on a CAV 48-speed CD-ROM drive into a VLSI. The CD signal processor is a mixed mode monolithic IC including servo-processor, data recovery, data-processor, and I-bit DAC. For servo signal processing, we included a DSP core, while, for CAV mode playback, we adopted a PLL with a wide recovery range. Data processor (DP) was designed to meet the yellow book specification.［2］So, the DP block consists of EFM demodulator, C1/C2 ECC block, audio processor and a block transferring data to an ATAPI chip. A modified Euclid's algorithm was used as a key equation solver for the ECC block To achieve the high-speed decoding, the RS decoder is operated by a pipelined method. Audio playability is increased by playing a CD-DA disc at the speed of 12X or 16X. For this, subcode sync and data are processed in the same way as main data processing. The overall performance of IC is verified by measuring a transfer rate from the innermost area of disc to the outermost area. At 48-speed, the operating frequency is 210 ㎒, and this chip is fabricated by 0.35 um STD90 cell library of Samsung Electronics.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2002년도 Proceedings of the International Welding/Joining Conference-Korea
• /
• pp.314-319
• /
• 2002

The Automation and Control Group at the University of Brasilia is developing an automatic welding station based on an industrial robot and a controllable welding machine. Several techniques were applied in order to improve the quality of the welding joints. This paper deals with the implementation of a laser-based computer vision system to guide the robotic manipulator during the welding process. Currently the robot is taught to follow a prescribed trajectory which is recorded a repeated over and over relying on the repeatability specification from the robot manufacturer. The objective of the computer vision system is monitoring the actual trajectory followed by the welding torch and to evaluate deviations from the desired trajectory. The position errors then being transfer to a control algorithm in order to actuate the robotic manipulator and cancel the trajectory errors. The computer vision systems consists of a CCD camera attached to the welding torch, a laser emitting diode circuit, a PC computer-based frame grabber card, and a computer vision algorithm. The laser circuit establishes a sharp luminous reference line which images are captured through the video camera. The raw image data is then digitized and stored in the frame grabber card for further processing using specifically written algorithms. These image-processing algorithms give the actual welding path, the relative position between the pieces and the required corrections. Two case studies are considered: the first is the joining of two flat metal pieces; and the second is concerned with joining a cylindrical-shape piece to a flat surface. An implementation of this computer vision system using parallel computer processing is being studied.

• 대한공간정보학회지
• /
• 제18권4호
• /
• pp.51-60
• /
• 2010

지난 2008년도에 기존의 기반시설부담금제가 국토계획법 상 기반시설부담구역제도로 개정되면서 2009년도 이후 전국적으로 다수 지자체들이 본 제도를 도입, 시행하고 있으며 이러한 새 제도를 통해 난개발 방지를 위한 선계획의 마련과 기반시설 설치비용 확보를 위한 유용한 제도적 기반을 가지게 되었다. 이러한 맥락에서 본 연구는 기반 시설설치계획과 기반시설부담비용 산정과정에 앞서 필요한 기반시설부담구역 지정에 대해 시행령에서 명시한 인구증가율 기준을 근거로 인구격자의 수직수평방향 사출형 셀 집단화 방법을 통해 구역지정 대안을 검토해 보고 이를 실제 기반시설부담구역 지정이 필요한 것으로 판단되는 화성시 수영리 개발제한구역 일원 대상지에 적용해 봄으로써 상기 방법론의 기술적 적용가능성을 확인함과 동시에 실무적 차원의 구역결정 제언을 시도해 보았다는 데 연구의 의의가 있다.