• 한국콘텐츠학회논문지
• /
• 제12권6호
• /
• pp.338-345
• /
• 2012

서구화된 식습관과 생활환경의 변화로 전립선비대증이 증가하고 있다. 하지만 진단 시 표준으로 참고할 기준이 되는 전립선 용적에 대한 연구가 부족하다. 또한 국내에서 이뤄진 연구의 대부분은 40대 이상의 중년 남성을 대상으로 하고 있다. 본 연구는 건강검진을 위해 방문한 30대 남성에서 경직장초음파로 측정한 전립선 용적을 후향적으로 분석하여 그 결과를 보고한 내용이다. 총 157명을 대상으로 하여 평균 연령은 $34.6{\pm}2.9$세이었고, 평균 전립선 용적은 $19.4{\pm}4.0ml$이었다. 전립선 용적은 연령, 전립선특이항원 수치, 체질량지수, 체표면적, 복부둘레와 양의 상관관계를 보였고, 특히 복부둘레와 가장 큰 상관관계를 보였다(r=0.317, p<0.001).

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.29-38
• /
• 1999

This study identified emission sources and emissions of air pollutants such as volatile organic compounds (VOCs), solvents, and acid gases produced from chemical plants. We collected air samples from various processes, reactors and facilities using VOC detectors and workers' experience. We identified chemical structures and emission concentrations of air pollutants. We analyzed total emissions of air pollutants emitted from the chemical plants. Also, we developed some emission reduction technologies based on chemical types and emission situations of the identified air pollutants. For reduction of air emissions of acid gases, we employed a method improving solubility of pollutants by reducing scrubber operation temperature, increasing surface area for effective contact of gas and liquid, and modifying or changing chemicals used in the acid scrubbers. In order to reduce air emissions of both amines and acid gases, which have had different emission sources each other but treated by one scrubber, we first could separate gas components. And then different control techniques based on components of pollutants were applied to the emission sources. That is, we first applied condensation and then acid scrubbing method using H2SO4 solution for amine treatment. However, we only used an acid scrubbing method using H2O and NaOH solution for acid gas treatment. In order to reduce air emissions of solvents such as dimethylformamide and toluene, we applied condensation and activated carbon adsorption. In order to reduce air emissions of mixture gases containing acid gases and slovents, which could not be separated in the processes, we employed a combination of various air pollution control devices. That is, the mixture gases were passed into the first condenser, the acid scrubber, the second condenser, and the activated carbon adsorption tower in sequence. In addition, for improvement of condensation efficiency of VOCs, we changed the type of the condensers attached in the reactors as a control device modification. Finally, we could successfully reduce air emissions of pollutants produced from various chenmical processes or facilities by use of proper control methods according to the types and specific emission situations of pollutants.

• 한국분말재료학회지
• /
• 제25권5호
• /
• pp.426-434
• /
• 2018

In this study, $MgO-CaO-Al_2O_3-SiO_2$ (MCAS) nanocomposite glass powder having a mean particle size of 50 nm and a specific surface area of $40m^2/g$ is used as a sintering additive for AlN ceramics. Densification behaviors and thermal properties of AlN with 5 wt% MCAS nano-glass additive are investigated. Dilatometric analysis and isothermal sintering of AlN-5wt% MCAS compact demonstrates that the shrinkage of the AlN specimen increases significantly above $1,300^{\circ}C$ via liquid phase sintering of MCAS additive, and complete densification could be achieved after sintering at $1,600^{\circ}C$, which is a reduction in sintering temperature by $200^{\circ}C$ compared to conventional $AlN-Y_2O_3$ systems. The MCAS glass phase is satisfactorily distributed between AlN particles after sintering at $1,600^{\circ}C$, existing as an amorphous secondary phase. The AlN specimen attained a thermal conductivity of $82.6W/m{\cdot}K$ at $1,600^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• 제23권4호
• /
• pp.511-517
• /
• 2013

In this work, a fibrous bed bioreactor with high specific surface area and good adsorption efficacy for S. cerevisiae cells was used as the immobilization matrix in the production of ethanol. In batch fermentation, an optimal ethanol concentration of 91.36 g/l and productivity of 4.57 g $l^{-1}\;h^{-1}$ were obtained at an initial sugar concentration of 200 g/l. The ethanol productivity achieved by the immobilized cells was 41.93% higher than that obtained from free cells. Ethanol production in a 22-cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in packed-bed reactors, a maximum ethanol concentration of 108.14 g/l and a productivity of 14.71 g $l^{-1}\;h^{-1}$ were attained at $35^{\circ}C$, and a dilution rate of 0.136 $h^{-1}$ with 250 g/l glucose.

• Journal of Microbiology and Biotechnology
• /
• 제28권6호
• /
• pp.957-967
• /
• 2018

A novel $g-C_3N_4$/ZnO/stellerite (CNZOS) hybrid photocatalyst, which was synthesized by coupled hydro thermal-thermal polymerization processing, was applied as an efficient visible-light-driven photocatalyst against Staphylococcus aureus. The optimum synthesized hybrid photocatalyst showed a sandwich structure morphology with layered $g-C_3N_4$ (doping amount: 40 wt%) deposited onto micron-sized ZnO/stellerite particles (ZnO average diameter: ~18 nm). It had a narrowing band gap (2.48 eV) and enlarged specific surface area ($23.05m^2/g$). The semiconductor heterojunction effect from ZnO to $g-C_3N_4$ leads to intensive absorption of the visible region and rapid separation of the photogenerated electron-hole pairs. In this study, CNZOS showed better photocatalytic disinfection efficiency than $g-C_3N_4/ZnO$ powders. The disinfection mechanism was systematically investigated by scavenger-quenching methods, indicating the important role of $H_2O_2$ in both systems. Furthermore, $h^+$ was demonstrated as another important radical in oxidative inactivation of the CNZOS system. In respect of the great disinfection efficiency and practicability, the CNZOS heterojunction photocatalyst may offer many disinfection applications.

• Environmental Engineering Research
• /
• 제18권4호
• /
• pp.229-234
• /
• 2013

This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.

• Composites Research
• /
• 제18권3호
• /
• pp.31-37
• /
• 2005

본 연구에서는 나노섬유로 강인화된 복합재료를 만들기 위해 전기방사방법을 이용해서 폴리에틸렌옥사이드 (PEO) 나노섬유를 제조하였고, 제조된 복합재료와의 기계적 계면특성을 비교하기 위해 PEO 입자로 강인화된 복합재료를 제조하였다. PEO 나노섬유의 파이버 직경과 모폴로지는 주사전자현미경을 통해 관찰하였고, 복합재료의 기계적 계면특성은 파괴인성 $(K_{IC})$과 층간 전단 강도실험 (ILSS)을 통하여 알아보았다. 실험결과, 인가전압이 증가될수록 파이버의 직경은 감소하였고. 고전압에서 제트 불안정성의 증가로 인해서 최적의 섬유구조는 15 kV에서 얻을 수 있었다. PEO 나노섬유로 강인화된 에폭시 복합재료는 파괴인성인자 값인 $K_{IC}$와 ILSS가 PEO 입자로 강인화된 복합재료보다 향상된 값을 나타내었다. 이는 나노섬유가 입자에 비해 높은 비표면적과 aspect ratio를 가짐에 따라 복합재료의 기계적 계면특성을 향상시키는데 중요한 역할을 하는 것으로 판단된다.

• 한국세라믹학회지
• /
• 제31권1호
• /
• pp.104-114
• /
• 1994

ZrO2 fibers were fabricated by means of the Sol-Gel process using Zr(O-nC3H7)4-H2O-C2H5OH-HNO3 solution as a starting material. The optimum experimental parameters such as molar ratio of starting materials, concentration, temperature, viscosity, the amounts of stabilizer and the pH of solution were determined. The experimentally determined optimum variables which produce good ZrO2 fibers were used to manufacture the Y2O3-and CaO-ZrO2 fibers. The amounts of Y2O3 and CaO were varied within the range from 1.5~5 mol% and 3~15 mol% respectively. The phase transformation and microstructural evolution of the fabricated ZrO2 gel fibers were investigated after heat treatments up to 120$0^{\circ}C$ by X-ray diffraction, Raman microprobe spectroscopy, SEM, and specific surface area and pore volume measurements. From the analysis of X-ray diffraction and Raman spectra, the phase of heat treated Y2O3-and CaO partially stabilized ZrO2 gel fibers(Y2O3:2.5~3 mol%, CaO:6~9 mol%) were identified as a tetragonal phase up to 100$0^{\circ}C$. The maximum tensile strength of 2.5Y2O3-97.5ZrO2 and 6CaO-94ZrO2 (in mol%) fibers heat treated at 100$0^{\circ}C$ for 1 hr was found be 1.3~2 GPa with diameters of 10~20 ${\mu}{\textrm}{m}$.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 추계 학술발표회
• /
• pp.1559-1570
• /
• 2008

A new grouting material named 3S is developed that can be used effectively for reinforcing cut surface of weathered rock in processing of tunneling. The new material is composed of mostly micro slag cement and general Portland cement, but the material is foundered again upto $8,000\;cm^2/g$ of specific area so that it can be easily infiltrated in to the ground. For verifying technical and engineering quality of the material several laboratory tests with specially designed test apparatus were performed including compression tests, infiltration tests and resonant column tests. It was verified that the newly developed grouting material at early age of 1 or 3 days generates 200~1500% higher compressive strength and 400~560% larger elastic modulus than those of the LW(LW-1) or micro-cement(LW-2) grouting materials in the market. In addition, the new 3S grouting material could be so easily infiltrated into the model ground in the lab tests that it produces 4 times larger grouted roots in average compared to the usual water glass type grouting material(LW-1). Thus, it can be said that the newly developed grouting material can effectively prevent inflow water into tunnel compared to LW grouting materials.

• 한국조경학회지
• /
• 제30권3호
• /
• pp.46-56
• /
• 2002

This landscape design proposal was presented to a design competition for the Culture.Welfare.Administration Complex of Yongin-City which was held by Yongin-City in December, 2001. The site is located at 68-19 Yukbuck-dong, Yongin-City, Kyunggi-do and has an area of 236,449$m^2$. The judging criteria for landscape design set by the Yongin-City could be articulated as follows: an environment friendly design respecting the surrounding environment, a locale as a community center of Yongin-City, a resting place for the welfare of employees and visitors, and finally a place with diverse landscape elements reflecting the individual identity of each facility. This proposal chose the main design concept of this project as‘Nature meets City'. A grove of pine trees fragments the multi building complex, so that‘nature'was brought into the‘city'. A double ground system was introduced to respect the existing topography and to enhance the efficency of the land. This design proposal consists of four segments. Each segment has its own design theme. Outdoor space of this multi-purpose complex was designed with themes of nature, culture, welfare and administration. Space composition with grid and natural looking curvilinear lines was a design motive for this complex. The nature oriented planting design was introduced to respect the existing groves of Mt. Suksung. Specific species were chosen to follow its own spatial character in each space. An environmental sculpture called‘Dream Soaring'was placed in the middle of‘Citizen Plaza'. Its light and feather-looking shape symbolizes the vision of Youngin-City. At night people can watch the diverse color changes on its mirror-like surface.