• KSBB Journal
• /
• v.20 no.6
• /
• pp.438-442
• /
• 2005

Batch experiments were performed to investigate the effects of volumetric mixing ratio(v/v) of two substrates, food wastes(FW) and waste activated sludge(WAS). In batch experiments, optimum mixing ratio for hydrogen production was found at $10{\sim}20$ v/v % addition of WAS. CSTR(Continuous Stirred tank reactor) was operated to investigate the hydrogen productivity and the microbial community under various HRTs and volumetric mixing ratio(v/v) of two substrates. The maximum yield of specific hydrogen production, 140 mL/g VSS, was found at HRT of 2 day and the volumetric mixing ratio of 20:80(WAS:FW). The spatial distribution of hydrogen producing bacteria was observed in anaerobic fermentative reactor using fluorescent in situ hybridization(FISH) method.

• KSBB Journal
• /
• v.15 no.2
• /
• pp.174-180
• /
• 2000

Pichia pastoris and Hansenula polymorpha, the methylotrophic yeasts have been widely used as a host for the production of e eudaryotic proteins due to the advantages related to their inherited characters. This paper describes the method to enhance t the productivity of recombinant proteins by P. pastoris and H. po$\psi$morpha. In the production of recombinant proteins using a f fed batch fermentation system, the effects of specific growth rate on the specific expression rate of re$\infty$mbinant proteins w were studied. In both species, the expression system of recombinant proteins using the fed batch fermentation was optimezed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.247-259
• /
• 2007

In this study, we examined the flux of carbon and water using an eco-hydrological model, Regional Hydro-Ecologic Simulation System (RHESSys). Our purposes were to develop a set of parameters optimized for a well-designed experimental watershed (Gwangneung Research Watershed, GN) and then, to test suitability of the parameters for predicting carbon and water fluxes of other watershed with different regimes of climate, topography, and vegetation structure (i.e Gangseonry Watershed in Mt. Jumbong, GS). Field datasets of stream flow, soil water content (SWC), and wood biomass product (WBP) were utilized for model parameterization and validation. After laborious parameterization processes, RHESSys was validated with the field observations from the GN watershed. The parameter set identified at the GN watershed was then applied to the GS watershed in Mt. Jumbong, which resulted in good agreement for SWC but poor predictability for WBP. Our study showed that RHESSys simulated reliable SWC at the GS by adjusting site-specific porosity only. In contrast, vegetation productivity would require more rigorous site-specific parameterization and hence, further study is necessary to identify primary field ecophysiological variables for enhancing model parameterization and application to multiple watersheds.

• Microbiology and Biotechnology Letters
• /
• v.31 no.1
• /
• pp.63-68
• /
• 2003

Saccharomyces cerevisiae KNU5377 is a constitutively thermotolerant, fermentative strain at high temperatures over 4$0^{\circ}C$. The exposure to 0.5 M NaCl caused S. cerevisiae KNU5377 to be lost its constitutive thermotolerance. Furthermore, the NaCl adaptation beyond 0.3 M during the overnight culture forced the strain-specific fermentation ability of S. cerevisiae KNU5377 to be disappeared. However, these phenomena did not occur in the reference, Saccharomyces cerevisiae ATCC24858. As a result, this adaptation led both strains to show the closely similar thermotolerance level and alcohol fermentation ability, implying the NaCl adaptation eliminated its strain-specific characteristics of S. cerevisiae KNU5377 Therefore it indicated that the superior intrinsic characteristics of S. cerevisiae KNU5377 must be related to the NaCl adaptation. On the other hand, the heat adaptation elevated alcohol productivity for both strains, but surprisingly did it for KNU5377 at the rate of two times higher than the reference's one; this suggests that KNU5377 possesses more efficient system enough to cause the difference. Consequently, these characteristics of S. cerevisiae KNU5377 must be interesting targets for further study to understand on how KNU5377 could acquire the constitutive thermotolerance and the outstanding fermentative capacity at high temperatures.

• Korean Journal of Food Science and Technology
• /
• v.28 no.6
• /
• pp.1151-1156
• /
• 1996

Effects of xylose and glucose on the xylitol production were investigated with Candida parapsilosis KFCC 10875. With increasing the ratio of glucose to xylose, xylitol production decreased but ethanol and glycerol production increased. The maximum concentrations of ethanol and glycerol were 21.5 g/l and 3.6 g/l, respectively, in a medium consisting of 10 g/l xylose and 40 g/l glucose. No xylitol was formed in the glucose medium without xylose since xylitol could not be produced from glucose alone. The inhibitory effect of ethanol, a major by-product, on xylitol production was also studied. As the added ethanol concentration was increased, xylitol production decreased. When cells were inoculated in a xylose medium after removing the by-product (ethanol), xylitol production was not inhibited. The concentrated cells grown on xylose or glucose were inoculated in a fermentor containing the xylose medium. The total activities $(specific{\;}activities{\times}\;cell\;concentration)$ of xylose reductase and xylitol dehydrogenase in concentrated cells grown on glucose were the same as those in a normal fermentation; the specific activities of the above enzymes in the cells grown on xylose were the same as those in a normal fermentation. It indicates that the xylitol productivity of concentrated cells grown on xylose could be increased with increasing the cell concentration. By using concentrated cells of 20 g/l grown on xylose, the final xylitol concentration of 40 g/l was obtained for 18 h fermentation from 50 g/l xylose.

• KSBB Journal
• /
• v.15 no.5
• /
• pp.482-488
• /
• 2000

The Fab fraction of PDC-E2 specific human monoclonal antibody was produced using recombinant E. coli, and the effects of glucose and acetate were investigated to develop an optimal strategy for recombinant human antibody production. Higher glucose concentration in the culture media resulted inn higher cell growth and glucose consumption rate, which in turn resulted in an increased acetate production rate. When glucose was depleted, cells began to consume acetate as an energy source, and this consumption rate depended on the glucose concentration. When the residual glucose concentration was high, the accumulation of acetate was accelerated due to an increase in the acetate production rate and a decrease in the acetate consumption rate. Futhermore, it was found that a high accumulation of acetate, accompanied by a high glucose concentration, inhibited human antibody formation; the critical acetate concentration was $0.6g/\ell$. During production, a high glucose concentration enhanced cell growth, but inhibited antibody formation due to catabolic repression. Therefore, it is important to keep the concentration of both glucose and acetate as low as possible to increase antibody production after induction. Accordingly, it is important to accurately control the concentration of glucose and acetate in the culture media to obtain high cell densities and high productivity levels of recombinant human antibody.

• Journal of the Korean Wood Science and Technology
• /
• v.42 no.3
• /
• pp.339-345
• /
• 2014

For enhancing productivity of glulam, high frequency (HF) curing technique was researched in this study. Heat energy is generated by electromagnetic energy dissipation when HF wave is applied to a dielectric material. Because both lamina and adhesives have dielectric property, internal heat generation would be occurred when HF wave is applied to glulam. Most room temperature setting adhesives such as phenol-resorcinol-formaldehyde (PRF) resin, which is popularly used for manufacturing glulam, can be cured more quickly as temperature of adhesives increases. In this study, dielectric properties of larch wood and PRF adhesives were experimentally evaluated, and the mechanism of HF heating, which induced the fast curing of glue layer in glulam, was theoretically analyzed. Result of our experiments showed relative loss factor of PRF resin, which leads temperature increase, was higher than that of larch wood. Also, it showed density and specific heat of PRF, which are resistance factors of temperature increase, were higher than those of wood. It was expected that the heat generation in PRF resin by HF heating would occur greater than in larch wood, because the ratio of relative loss factor to density and specific heat of PRF resin was greater than that of larch wood. Through theoretical approach with the experimental results, the relative strengths of ISM band HF electric fields to achieve a target heating rate were estimated.

• Journal of Life Science
• /
• v.31 no.1
• /
• pp.52-58
• /
• 2021

Pseudomonas syringae pv. actinidiae, which causes bacterial canker in kiwifruit, is divided into five biovars (1, 2, 3, 5, 6) on the basis of genetic characteristics and toxin productivity. Among them, biovar 3 is responsible for the current global outbreak, and has been isolated in Korea since 2011. Biovar 3 strains isolated from Korea are subdivided into six genetically different lineages (subgroup I, IV, V, VI, VII, and VIII) based on random amplified polymorphic DNA (RAPD) analysis. In this work, the subgroup-specific sequence characterized amplified region (SCAR) primers were developed from sequenced differential RAPD bands. Distribution of the subgroups of the biovar 3 strains collected in Korea from 2011-2017 were examined using these subgroup-specific primer sets. Among the 54 strains tested, 35 strains (64.8%) belonged to subgroup V, 9 strains (16.7%) belonged to subgroup IV, 4 strains (7.4%) belonged to subgroup VI, 3 strains (5.6%) belonged to subgroup VII, 2 strains (3.7%) belonged to subgroup VIII, and 1 (1.9%) strain belonged to subgroup I. Strains belonging to subgroups IV, V, and VI were shown to be related to strains isolated from China, New Zealand, and Chile, respectively. The study revealed that the biovar 3 strains in Korea are genetically diverse and are estimated to have been introduced through pollen sourced from foreign countries.

• Journal of Applied Biological Chemistry
• /
• v.64 no.1
• /
• pp.39-48
• /
• 2021

Droughts are one of the abiotic stresses that hinders the growth and productivity of crop plants. Coping with abiotic stress is necessary to understand the molecular regulatory networks that makes plants respond to adverse environmental conditions. In our experiment to find a combination that can cope with abiotic stress (respond to drought), we screened 5 stress-inducible promoters that are expressed only under stress conditions. This founded 36 cis-elements in stress-inducible promoters. With the result we designed 2 synthetic promoters (BL1, BL2) for fine-controlled regulation by assembling cis-elements from the native promoters, which are expressed only under stress caused by droughts. Analysis of the transgenic plant (BL1-GUS, BL2-GUS) showed that the synthetic promoters increased the expression of β-glucuronidase (GUS) in transgenic plants under desiccation. Also in the transient activation assay demonstrated that synthetic promoters induced the co-transformation of effector DREB1A and DREB2C. These results expect that the synthetic promoter with a combination of drought-specific elements can be used to respond to various abiotic stress and is resistant to stress without causing growth retardation.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.6
• /
• pp.63-65
• /
• 2023

BIM and AR technologies have been assessed as a means of enhancing productivity within the construction industry, through the provision of effortless access to critical data on site, achieved via the projection of 3D models and associated information onto actual structures. However, most of the previous researches for applying AR technology in construction quality management has been performed for construction projects in general, resulting in only overall on-site management solutions. Also, a few previous researches for the application of AR in the quality management of specific elements like reinforcements focused only on simple projection, so conducting specific quality inspection was impossible. Hence, this study aimed to develop a practically applicable BIM-based AR quality management system targeted for reinforcements. For the development of this system, the reinforcement inspection items on the quality checklist used at railway construction sites were analyzed, and four types of AR functions that can effectively address these items were developed and installed. The validation result of the system for the actual railway bridge showed a degradation of projection stability. This problem was solved through model simplification and enhancement of the AR device's hardware performance, and then the normal operation of the system was validated. Subsequently, the final developed reinforcement quality inspection system was evaluated for practical applicability by on-site quality experts, and the efficiency of inspection would significantly increase when using the AR system compared to the current inspection method for reinforcements.