• Horticultural Science & Technology
• /
• v.33 no.2
• /
• pp.227-232
• /
• 2015

This experiment was carried out to investigate the effects of shading materials (aluminum specific-shading screen and polypropylene non-woven fabric) and shading ratio (50% and 70%) on climatic changes, cut-flower quality, and yield of spray rose cultivars for export during high temperature periods. The daily cumulative solar radiations were higher with the aluminum specific-shading screen, especially with 50% shading compared to polypropylene non-woven fabric. Air temperature and root zone temperature within rockwool media greatly decreased with the aluminum specific-shading screen, but relative air humidity was not different among shading methods. Chlorophyll contents (SPAD values) were slightly higher with aluminum-specific shading screen than with polypropylene non-woven fabric, and were higher with 50% than with 70% aluminum specific-shading screen. Except for 'Lovely Lydia', marketable and exportable yields of all cultivars were higher with 50% than with 70% aluminum shading treatment. In addition, flowers talk length, stem diameter, number of node and 7ea-leaflet, and floret number tended to be better with aluminum specific-shading screen. Flower stalk length was higher with 70% than with 50% aluminum shading treatment. Chromaticity of petals slightly increased, and vase life was 0.5-2.5 days longer for each cultivar with aluminum specific-shading screen than with polypropylene non-woven fabric.

• Journal of Radiation Protection and Research
• /
• v.23 no.3
• /
• pp.149-157
• /
• 1998

An analysis has been performed to estimate the additional number of workers and the additional collective dose in man-cSv which would be required, nuclear industry-wide as a result of reducing individual dose limit. This analysis can be extended to the reduction in the dose limits recommended by ICRP Publ.60 and BEIR V report as well as the proposed dose limits by regulatory authorities. An industry-wide database was employed in the analysis based on a summary of industry-wide occupational radiation exposure compiled by the Korea Radioisotope Association. Correlation model was employed to compute the affects of setting specific annual individual dose limits. In this study, we have addressed worker non-productivity while in the radiation environment on a parametric or 'sensitivity analysis' basis. This alleviates the need for developing such data underlying a summation of many individual tasks at many nuclear facilities. It has the advantage that very low non-productivity assumptions can readily be defended as conservative, in that it is difficult to approach such low worker non-productivity factors even in the best of environments in any industry. On a per facility basis, for calendar year 1997, the number of workers required would be increased from 231 workers to 269 workers and collective man-cSv dose would be also increased by approximately fourteen percent if the individual dose limit was reduced to 2 cSv/y and an individual worker non-productivity fraction of 0.1 is assumed.

• Journal of Digital Convergence
• /
• v.20 no.4
• /
• pp.529-539
• /
• 2022

This study analyzed the index change in efficiency and productivity for the tax reorganization project of the regional headquarters of Korea Asset Management Corporation using panel data for 3 years from 2017 to 2019 using the DEA-Malmquist analysis model. According to the DEA analysis result, the average of the efficiency by the CCR model of the regional headquarters tax reorganization project of the Korea Asset Management Corporation was 0.671 in 2017, 0.772 in 2018, and 0.699 in 2019, and the average of the efficiency by the BCC model was 0.798 in 2017, 0.851 in 2018 and 0.771 in 2019. As a result of analyzing the Malmquist productivity index, the time series average productivity index MPI increased by 4.5%. These results appear to be attributable to the increase in technological efficiency, technological change, and scale-efficiency change rather than the decrease in net efficiency change. Looking at the change in MPI by year, it decreased by 14.6% in 2017-2018, but increased significantly to 27.8% in 2018-2019. Through the results of DEA analysis of specific tax projects of public corporations, each regional headquarters of Korea Asset Management Corporation will be able to contribute to reinforcing business capabilities through mutual benchmarking.

• Fisheries and Aquatic Sciences
• /
• v.24 no.7
• /
• pp.260-275
• /
• 2021

Aquaponics is a cultivation system that combines aquaculture and agricultural hydroponics. This study investigated the productivity of leafy vegetables cultivated in the hybrid biofloc technology-aquaponics (HBFT-AP) using Japanese eel fed two kinds of diets (Mash, commercial powdered feed and extruded pellet [EP]) and hydroponics (HP).The mash was fed to the fish in a type of a dough mixed with water for 6 weeks (Exp1) and switched to the EP containing 2.7% monobasic potassium phosphate (MKP) for subsequent 6 weeks (Exp2). Leafy vegetables of 8 cultivar were employed in the experiment and water quality [dissolved oxygen (DO, mg/L), pH, water temperature (℃), electrical conductivity (EC; ㎲/cm), turbidity (NTU), TAN (NH₃ + NH₄⁺) (mg /L), NO₂-N (mg/L), NO₃-N (mg/L) and PO₄-P (mg/L)] was measured 6 times a week. Leafy vegetable productivity (HBFT-AP vs HP) was compared in respective experiment, which was similar or somewhat higher in HBFT-AP. During the 12-week feeding trial, concentrations of nitrite (NO₂-N) and phosphorus (PO₄-P) were kept low in variability while total ammonia nitrogen (TAN) and NO₃-N levels increased with time in HBFT-AP. At the end of two feeding trials, values of weight gain (WG, %), feed efficiency (FE, %), specific growth rate (SGR, %) and protein efficiency ratio (PER) were higher in Exp2 than in Exp1. As well, higher values in hematocrit (PCV, %), plasma K (mEq/L) and inorganic phosphorus (mg/dL) were found (p < 0.05) in Exp2 where fish were fed the EP (EP: 38.60%, 2.80 mEq/L and 7.04 g/dL; Mash: 33.20%, 1.95 mEq/L and 5.50 g/dL). Leafy vegetables in HBFT-AP using Japanese eel fed the EP with MKP 2.7% had a productivity similar (4 kinds of cultivar) or somewhat higher (4 kinds of cultivar) compared to those in HP. Also, Japanese eel fed the EP showed higher values of Pi (m/dL) and K (mEq/L) in plasma compared to those fed commercial powder diet.

• Journal of Marine Bioscience and Biotechnology
• /
• v.15 no.2
• /
• pp.41-48
• /
• 2023

The objective of the present study was to improve the biomass productivity of newly isolated freshwater green microalga Parachlorella sp. This was accomplished by culture conditions optimization, including CO₂ concentration, superficial gas velocity, and light intensity, in 0.5 L bubble column photobioreactors. The supplied CO₂ concentration and gas velocity varied from 0.032% (air) to 10% and 0.02 m/s - 0.11 m/s, respectively, to evaluate their effects on growth kinetics. Next, to maximize the production rate of Parachlorella sp., a lumostatic operation based on a specific light uptake rate (q_e) was applied. From these results, the optimal CO₂ concentration in the supplied gas and the gas velocity were determined to be 5% and 0.064 m/s, respectively. For the lumostatic operation at 10.2 µmol/g/s, biomass productivity and photon yield showed significant increases of 83% and 66%, respectively, relative to cultures under constant light intensity. These results indicate that the biomass productivity of Parachlorella sp. can be improved by optimizing gas properties and light control as cell concentrations vary over time.

• Journal of Sericultural and Entomological Science
• /
• v.26 no.2
• /
• pp.11-15
• /
• 1984

To save the labour reguired for separation of copulated moth during egg Production, some of the chemicals available at the market were on screen test for easy separation of copulated moth of silkworm. The obtained results are summarized as following. 1. In a separation ratio of copulated moth along with a treating time, TCTFE(Trichloro-trifluoroethane) completely separated the copulated moth in 10 minutes. The combinations of TCTFE plus Acetone (87.5 : 12.5 V/V) and TCTFE plus Acetic acid (50 : 50 V/V) take 25minutes for the complete separation of copulated moth. Use of Acetic acid solution only makes 100% separation of copulated moth in one hour and foully minutes and non$.$treatment shows only 47.5% of separation in three and half hours. On the other hand. There is no statistical significance between TCTFE Plus Acetone and control in the egg productivity. 2. The combination of TCTFE Plus Acetone (87.5 : 12.5 V/V) does not infuluence the egg productivity of the moth, showing 443 grains for an average number of egg per moth out of which 417 grains are for the number of fertilized eggs while control shows 452 grains for an avarage number of egg/moth and 428 grains for the number of fertilized eggs. However a sing1e use of TCTFE and Acetic acid shows less egg productivity and number of ferilized eggs per moth, respectively as compared to those of the control. In particular, a single use of acetic acid makes an increase of number of non-egg prodncible moth and it seems to be brought due to a chemical damage. 3. In a rearing test of the egg laid by the chemical treated moth, there are no differences among the treatments in all of the useful characters of the larvae; larval duration, survival rate, cocoon yield, single cocoon weight, single cocoon shell weight and cocoon shell ratio. In these regards, it is recognized that TCTFE can be practically used for the separation of copulated moth and the combination of TCTFE and Acetone promote its efiectiveness on the separation of copulated moth.

• Industrial Engineering and Management Systems
• /
• v.12 no.4
• /
• pp.330-335
• /
• 2013

A surface mount device (SMD) assembles electronic components on printed circuit boards (PCB). Since a component assembly process is a bottleneck process in a PCB assembly line, making an efficient SMD plan is critical in increasing the PCB assembly line productivity. Feeder assignment is an important part of the SMD plan optimization. In this paper, we propose a feeder re-assign improvement algorithm for a specific type of SMD machine with a piano type multi-head gantry. Computational results on some real-world benchmark data sets show the effectiveness of our proposed algorithm.

• The Journal of Society for e-Business Studies
• /
• v.7 no.3
• /
• pp.219-240
• /
• 2002

The various software engineering techniques have been appeared in order to cope with the software crisis since 1980's. Currently, the research against the techniques likes the Design pattern, Component which improve the software's re-use are spread out. Also S/W Development Process are interested intensively which attempts the quality and a increasing productivity of software development with the basic policy. The design pattern is the solution against the problem which occurs repeat in a specific area. Many design pattern are developed and researched, but the method which accommodates the developed design pattern efficiently in the phase of analysis and design software development process is not good enough, so it is the actual applying technique is difficult. In this paper we suggest and the “UML components+” which is a efficient component development process from customizing EJB based the J2EE using the “UML Components” which is a component development methodology. Applying J2EE pattern efficiently with UML components+, there is a possibility of efficiency in the component development based pattern.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.18 no.5
• /
• pp.191-194
• /
• 2008

We will focus on the horizontal Bridgman growth system to analyze the transport phenomena numerically, because the simple furnace system and the confined growth environment allow for the precise understanding of the transport phenomena in solidification process. In conventional melt growth process, the dopant concentration tends to vary significantly along the crystal. In this work, we propose the modification of crucible geometry for improving the productivity of silicon single-crystal growth by controlling axial specific resistivity distribution. Numerical analysis has been performed to study the transport phenomena of dopant impurities in conventional and proposed Bridgman silicon growth using the finite element method and implicit Euler time integration. It has been demonstrated using mathematical models and by numerical analysis that proposed method is useful for obtaining crystals with superior uniformity along the growth direction at a lower cost than can be obtained by the conventional melt growth process.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.1
• /
• pp.33-40
• /
• 2017

To isolate and identify the yeast strains associated with D. morbifera, homogenized D. morbifera root samples were spread onto GPY, DG18, SCG and DOB agar media containing antibiotics, Triton X-100, and l-sorbose. Total 81 yeast isolates were analyzed by sequencing of internal transcribed spacer (ITS) region of the ribosomal DNA. The results showed that the root-associated yeast species were composed of the genera Vanderwaltozyma (40 isolates), Cryptococcus (40 isolates), and Kluyveromyces (one isolate). Moreover, the Kluyveromyces isolate exhibited high bioethanol productivity. In addition, the Vanderwaltozyma and Cryptococcus were dominant in D. morbifera roots. The specific yeast community associated with D. morbifera roots was identified by phylogenetic sequence analyses. These yeast isolates may have industrial applications as biosurfactant and bioethanol.