• Journal of the Korean Wood Science and Technology
• /
• 제48권4호
• /
• pp.458-471
• /
• 2020

Effect of pre-treatment and compression ratio on specific gravity (SG) and dimensional stability improvement of three lesser-used wood species from natural forest area of North Kalimantan Province, Indonesia had been investigated. Hot soaking at 80℃ for 3 hours within 2 and 5% of boron solution was applied as pre-treatment, while compression ratio applied was 20 and 40% from the initial thickness. Densification was conducted using hot pressing machine at 30 kg/㎠ of pressure and 160℃ of temperature for 15 minutes. Specific gravity was measured gravimetrically, while dimensional stability was evaluated through thickness swelling and water absorption as the indicator. Results show that SG of densified wood was influenced by wood species and compression ratio, but not by pre-treatment applied; while dimensional stability was influenced by wood species, compression ratio, and pre-treatment. Specific gravity and water absorption of densified wood was improved significantly. Specific gravity increased 28.86-63.03%, while water absorption decreased 12.80-15.89%. Thickness swelling of 20% densified wood was lower than that of 40% densified wood.

• 암석학회지
• /
• 제3권3호
• /
• pp.234-240
• /
• 1994

국내 담홍색 화강암 석재의 대표적 산출지인 문경 가은읍 완장리에서 암반 시추탐사가 실시되었다. 코아상에서 풍화암, 연암, 보통암 및 경암으로 분류하여 물리적 및 화학적 차이 등을 연구 하였다. 비중과 흡수율은 각각 2.37~2.64와 0.27~1.87%이며, 풍화암에서 경암으로 갈수록 비중은 미약하게 증가하나 흡수율은 다소 크게 증가한다. 풍화가 심화될수록 공극율과 함수능력이 증가하여 뚜렷한 정의 상관관계를 가진다. 압축강도는 풍화정도가 감소될수록 크게 증가하나, 흡수율과 공극율은 경암에서 강도 증가에 관계없이 거의 균일하다. 풍화암으로 갈수록 점토질 성분의 잔존에 의한 것으로 해석되는 $Al_2O_3$+FeO(t)는 증가하여 $SiO_2$, CaO와 $K_2O$는 미약하게 감소한다.

• 자원환경지질
• /
• 제32권1호
• /
• pp.1-11
• /
• 1999

In the last decade, the supply of natural aggregates has been continuously increased due to the other types of aggregates. In general, aggregates constitute 70-80% of the total volume of concrete, so the quality of aggregates is main factor controlling physical characteristics of concrete. For this reason, physical properties of aggregate according to different rock types were studied. The majority of crushed aggregates is taken out of granite, gneiss, sandstone, andesite, basalt and so forth. The physical properties of these rock types were tested and most of them fell within the acceptable limit on the base of Korean standard regulation. The major lithology of the crushed aggregates is granite and gneiss, both of which are marked for more than 50% of total lithology thpes in Korea. A to the physical properties of granite, the high specific gravity coincides with low porosity, low absorption ratio, while the abrasion and soundness index show, in general, no specific trend. It has been assumed that slight differences of the physical properties of granite aggregates are related with those of the mineral composition, grain size, and so on. In comparison to granite, the physical properties of gneiss have little correlation one after another. This trend is related to different mineral composition, grain size and typical sheet fractures typically prevailing in the texture of gneiss. Spatial pattern of physical properties shows that high specific gravity of granite coincides only with low porosity and absorption ratio in all provinces except Cheolla province, and high specific gravity of gneiss coincides with low porosity and absorption ratio only in Cheolla and Gandwon provinces.

• 콘크리트학회논문집
• /
• 제15권4호
• /
• pp.566-573
• /
• 2003

본 연구에서는 기포콘크리트속에 연속공극율을 증가시켜 흡음률을 높이면서 강도를 증진시킨 강체형 흡음재의 제조를 목적으로 하였다. 실험결과, 기포첨가량을 증가시켜 연속공극률을 높일수록 흡음률이 증가하였으며, 재료두께 5cm인 경우 연속공극률 40%이상에서 평균흡음률 70%이상을 만족하였다. 또한 흡음재 두께의 증가는 중저음영역에서 흡음률 증가를 나타내었으며 평균흡음률 70%이상을 만족하는 기포콘크리트의 비중은 재료두께 5cm에서 0.4이하, 7cm에서 0.6이하로 나타났다. 그리고 평균흡음률 70%이상 만족하는 비중 0.4인 기포콘크리트의 압축강도는 시멘트분말도 3,000$\textrm{cm}^2$/g의 경우 1.37MPa이나, 시멘트분말도 8,000$\textrm{cm}^2$/g에서는 3.34MPa로 증가되었다. 따라서, 연속공극을 갖는 기포콘크리트의 압축강도는 시멘트분말도가 높을수록 증가하는 것으로 사료된다.

• 대한건축학회논문집:구조계
• /
• 제34권2호
• /
• pp.49-56
• /
• 2018

The use of highly absorptive materials in cement-based materials is increasing for internal curing purpose. However, calculation of correct absorption capacity of such materials is not easy, which leads to change in the effective water-to-cement ratio of cement paste by either absorbing or releasing water. In this study, effective absorption capacity of a highly absorptive material was found using isothermal calorimetry. Moreover, the effect of specific surface area was investigated. It was found that the method was capable of finding effective water absorption capacity of activated carbon fiber. For the activated carbon fiber used in this research, the effect of specific surface area was negligible because the high BET surface area was due to micropores less than 1nm, which does not affect the rate of hydration curve. Thus, the effective absorption capacity of such materials can be found successfully using this method.

• 한국도로학회논문집
• /
• 제15권2호
• /
• pp.57-63
• /
• 2013

PURPOSES : This study was performed to investigate a feasibility of job-site use of recycled concrete aggregate exceeding 3% of absorption rate. Test variables are coarse aggregate types such as natural aggregate, job-site processed recycled aggregate, and recycled aggregate processed from the intermediate waste treatment company. METHODS : First, aggregate properties such as gradation, specific gravity and absorption rate were determined. Next a basic series of mechanical properties of concrete was tested. RESULTS : All strength test results such as compression, flexure and modulus were satisfied for the minimum requirements. Finally up to first 48 elapsed days the shrinkage strains of concretes made from both recycled aggregates (in case of volume-surface ratio of 300) appeared to be greater than 26% of the companion concretes made from natural aggregates. CONCLUSIONS : Drying shrinkage result is ascribed to greater absorption rate and specific gravity of those specimens made from recycled aggregate. This may be reduced with an addition of admixtures.

• 터널과지하공간
• /
• 제23권3호
• /
• pp.212-218
• /
• 2013

풍화된 응회암 시험편을 모사하기 위하여 최고 예열온도를 200, 400, 600($^{\circ}C$)로 한 예열시험편을 제작하였다. 각 예열시험편에 대한 실내시험을 통해 비중, 흡수율, 탄성파속도, 일축압축강도, 압열인장강도, 탄성계수, 포아송비, 슬레이크 내구성 지수를 측정하였다. 암석에 열을 가하는 경우 물성의 열화가 발생하는 것으로 나타났으나 예외적으로 슬레이크 내구성 지수는 별로 영향을 받지 않는 것으로 평가되었다. P-파 속도와 일축압축강도, 압열인장강도, 탄성계수, 흡수율 간에는 상당한 상관성이 있는 것으로 해석되었으며, P-파 속도를 알면 일축압축강도, 압열인장강도, 탄성계수, 흡수율을 추정할 수 있는 회귀식을 도출하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 봄 학술발표회 논문집
• /
• pp.327-332
• /
• 2000

The objective of this study was to improve the defects of lightweight cement concrete by treating with redispersible polymer powders. The statistical relationships of water-cement ratios, contents of lightweight aggregates and polymer powers and be used for predicting the concrete strength. It was found that the varieties and techniques adopted in this experiment were capable of identifying the influence of various tested for air contents, flow test, water absorption, specific gravity, flexural and compressive strength. This study showed that fundamental properties were very affected by cement- lightweight aggregate ratio, polymer-cement ratio and water-cement ratio.

• 한국콘텐츠학회논문지
• /
• 제13권2호
• /
• pp.308-313
• /
• 2013

본 연구는 자기공명영상장치의 특성변수인 숙임각(flip angle), 반복시간(repetition time, TR), 에코시간(echo time, TE)을 사용하여 전자파흡수율(specific absorption rate, SAR)을 알아보고자 하였다. 연구대상은 체중 10 kg부터 90 kg까지를 대상으로 하여 동일한 검사기법을 적용하였고, 매개변수의 변화에 따른 평균 SAR 및 peak SAR 값을 측정하였다. 체중에 따른 SAR는 TE에서 변화는 없지만 숙임각이 커지고 TR이 짧을수록 증가하였다. SAR 값은 두부 허용 기준치 범위에 포함이 되었고 분절별 체중에 따른 영상의 신호 대 잡음비(signal to noise ratio, SNR)는 체중이 증가함에 따라 SNR은 증가하지는 않았다. 본 결과를 바탕으로 적절한 특성변수를 사용하여 다양한 대조도와 SNR을 얻어 진단의 가치를 높일 수 있을 것이다.

• ETRI Journal
• /
• 제46권4호
• /
• pp.571-580
• /
• 2024

A compact triple-band porous electromagnetic bandgap structure-loaded coplanar-waveguide-fed wearable antenna is introduced for applications of wireless body area networks. The porous structure is aimed to create a stopband or bandgap in the electromagnetic spectrum and increase breathability. The holes in the bottom electromagnetic bandgap surface increase the inductance, which in turn increases the bandwidth. The final design resonates at three bands with impedance bandwidths of 264 MHz, 100 MHz, and 153 MHz and maximum gains of 2.18 dBi, 6.75 dBi, and 9.50 dBi at 2.45 GHz, 3.5 GHz, and 5.5 GHz, respectively. In addition, measurements indicate that the proposed design can be deformed up to certain curvature and withstand human tissue loading. Moreover, the specific absorption rate remains within safe levels for humans. Therefore, the proposed antenna can suitably operate in the industrial, scientific, and medical, Bluetooth, Wi-Fi, and WiMAX bands for potential application to wireless body area networks.