• Special Issue of the Society of Naval Architects of Korea
• /
• 2013.12a
• /
• pp.1-7
• /
• 2013

In past decades, a maximum standard vessel size for chemical tankers is not normally larger than 55,000 TDW due to the characteristic of chemical product shipment which is so variable but small quantity unlike single product carries such as crude oil tankers. These days, as demand of very large chemical tanker is rising due to the change of market trend of chemical product shipment, 75,000 TDW class chemical tanker has been developed. The newly developed vessel's structure has been designed based on CSR (Common Structural Rule) for double hull oil tankers (hereafter CSR) published by IACS (International Association of Classification Societies). However, due to the large difference from typical oil tankers, many items should be specially considered such as on deck transverse and corrugated bulkheads. In addition, two longitudinal bulkheads without upper stool have been constructed in order to maximise the number of cargo tanks and the volume of each cargo tanks. In this study, key word of the vessel has been briefly reviewed and the structural reliability of the proposed vessel has been investigated.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2008.09a
• /
• pp.16-28
• /
• 2008

Recent growth in LNG market has led dramatic increase in new buildings of LNG carriers and several large LNG carriers are now being constructed by shipbuilders in Korea. Large size LNG carriers has brought keen concerns on the issue regarding safety of cargo containment systems and sloshing impact load which is the critical source of loads on the membrane type containment systems. Up to the present, the best way to properly assess sloshing impact pressures on surrounding walls is a model testing for wide-ranged excitation conditions. These impact pressures obtained from model tests sometimes need to be interpreted to full-scale values and in the near future this necessity will be strengthened for more rigorous and direct safety assessment of LNG cargo containment system. In this paper, a basic experimental study is carried out with two different sized, 2D identically shaped model tanks excited in simple translational motions. Relationships between pressures of different sized model tanks are investigated Model tanks are filled with fresh water and equipped with same sized pressure sensors.

• Journal of the Korean Institute of Navigation
• /
• v.18 no.2
• /
• pp.129-149
• /
• 1994

Sea casualties may happen in ship, cargo and the others concerned with sea transportation. : the shipo-wer, marine insurer and salvage company have been endeavored to compensate salvage award with some rule and regulation such as Marine Insurance Act, York Antwerp Rules and Average adjustment rules. Once sea casualties happened, the salvage contract is established between the owners, marine insurance and salvage company, the contract are divided into so many kinds of them. In this paper, we have an analysis on the character of the salvage contract whether the characteristic contents of them are in benefit to any party or not. In this connection with these positive or negative character of the contract, it is worthwhile to compare the actual salvage expenses contract with no cure no pay contract. LOF 1990 has been revised recently, which is based on no cure no pay, expecially, the special compensation, safety net clause of LOF 1990 could be understood in the view of the prevention of sea pollution and the preservation of sea circumstances in the world. Salvage has the complicated and quality, because the adjustment of almost salvage charges have been treated through the other sea casualties which is accompanied by and mixed with. Besides of the importance of salvage contracts, we are in need to understand that what the diversified character of salvage charges are. Furthermore the owners should carefully select the insured conditions on Hull Insurance according to the type of his company, operating ocean route, loading cargo and etc. In this paper, we would try to analyze the character of the salvage award such as General Average, Sue and Labour Charges and Particular charges. We would like to propose that the uniformed system of the salvage award. Compensation should be built up for the effective and efficient salvage operation and for reducing the claims and conflicts from the concerned parties. To this end, we could expect that the uniformed system for salvage award compensation will come to be the benefit of all owners, insurers, salvage company.

• Journal of Korean Port Research
• /
• v.13 no.2
• /
• pp.313-322
• /
• 1999

Pusan the principal port of South Korea, has opened its door since 1876. Currently, the four-stage port construction project is under way to handle ever-growing marine transportation volume. While the port unloading capabilities are increasing the infrastructure to deal with all the transportation volume failed to catch up with them. Accordingly the city had to suffer from worst traffic congestion on due to the increasing container traffic volume causing logistical costs to rise. This study was designed to inspect the enforcement of infrastructure construction plan and suggest systematical and effective ways to improve the plan. The study focused on :\circled1The decision-making procedure, \circled2Financial resource for the plan, \circled3Effectiveness of the project enforcement, and \circled4Who will be in charge of the project. As a result from the study, these followings were suggested to improve the plan. First, Pusan Port Infrastructure consisting of (Inter-city Free way, Belt Highway and Outer Highway) should be immediately legally-regulation project. Second, the method to finance the project should be deter-mined and investment consultation among the central government the city government and private sector should be also made. Measures to make the central government budget allocation for the project mandatory should be discussed. Third, Effectiveness of the project can be doubled by gradually or partialyl opening the routes based on long-term or short-term operating plans. Fourth, The organizer of the project should be appointed, or a special task-force team in charge of the plan can be formed.

• Journal of the Society of Naval Architects of Korea
• /
• v.56 no.6
• /
• pp.515-522
• /
• 2019

Since Liquefied Natural Gas (LNG) is normally carried at 1.1 bar pressure and at -163℃, special Cargo Containment System (CCS) are used. As LNG carrier is becoming larger, typical LNG insulation systems adopt a method to increase the thickness of insulation panel to reduce sloshing load and Boil-off Rate (BOR). However, this will decrease LNG cargo volume and increase insulation material costs. In this paper, silica aerogel, glass bubble were synthesized in polyurethane foam to increase volumetric efficiency by improving mechanical and thermal performance of insulation. In order to increase dispersibility of particles, ultrasonic dispersion was used. Dynamic impact test, quasi-static compression test at room temperature (20℃) and cryogenic temperature (-163℃) was evaluated. To evaluate the thermal performance, the thermal conductivity at room temperature (20℃) was measured. As a result, specimens without ultrasonic dispersion have a little effect on strength under the compressive load, although they show high mechanical performance under the impact load. In contrast, specimens with ultrasonic dispersion have significantly increased impact strength and compressive strength. Recently, as the density of Polyurethane foam (PUF) has been increasing, these results can be a method for improving the mechanical and thermal performance of insulation panel.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.6
• /
• pp.661-668
• /
• 2017

The purpose of this study is to analyze the chemical reaction pathway for explosion accident of mixed cargo. The analysis used a structural scenario using event-tree analysis. Structural scenarios were constructed by estimating various chemical reaction paths in the content of the mixed cargo accident recorded in the written verdict. The analytical method was applied to three kinds of analysis: chemical analysis based on chemical theory, quantitative analysis using chemical reaction formula, and probabilistic analysis through questionnaire. As a result of analysis, the main pathway of the accident occurred in three ways: the path of explosion due to the reaction of concentrated sulfuric acid with water, the path of explosion due to the reaction of metal and mixed acid, and the path of explosion by synthesizing with special substances. This result is similar to the path recorded in the validation, and it leads to thar the proposed path analysis method is valid. The proposed method is expected to be applicable to chemical reaction path estimation of various chemical accidents.

• Special Issue of the Society of Naval Architects of Korea
• /
• 2015.09a
• /
• pp.50-55
• /
• 2015

Application of newly conceptualized Anti-Splash Devices designed for COT vent pipes were studied on a P/V valve located on the upper deck of an oil carrier vessel. Anti-Splash devices are used in the shipbuilding industry in order to avoid oil overflow and spray accidents caused by excess pressure and vacuum condition in the cargo oil tanks. These conditions are caused by the transverse and longitudinal sloshing forces that arise from ship motion during sea voyages. The main issue with existing Anti-Splash device model is flux at the outlet of the Anti-Splash Device, and so, new conceptual models for the Anti-Splash device were developed and compared to existing Anti-Splash device model using CFD analysis. Transient analysis was used to capture the flow and velocity of each model and a comparative analysis was performed between old and new-concept models. This data was used to determine the optimal design parameters in order to develop an optimized Anti-Splash Device. A Factory acceptance test was performed on the new-concept models in order to verify the performance and efficiency against their design requirements and other criterion. The final step performed was to apply the optimized Anti-Splash Device models for COT vent pipes to an actual vessel and verify performance through a seawater cargo operation during a sea voyage as per the ship owner's request. The patent for the aforementioned device was obtained by the Korean Intellectual property Office dated Dec. 18th,2014.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.3
• /
• pp.191-198
• /
• 2024

Korea is an import and export-oriented economy that relies on shipping transportation, and sea ports play an important role in national economic growth. To secure and maintain the competitiveness of these ports, hardware and software investments are required, but policy support can also be expected to have an effect. This study identified the irrationality of the system by exploratory analysis of the port facility fee discount system for Ulsan Port, an energy hub port, and suggested improvement measures to resolve it.This study analyzed the volume of Ulsan Port and the reduction of port facility usage fees for about 10 years and identified irrational factors that despite a special port for liquid cargo, a considerable reduction for container cargo is concentrated, and even because it was a passing ship, 100% reduction for entrance and clearance fees were provided to them, which could cause serious moral hazard.. As a way to improve the port facility charge discount system at Ulsan Port, this study proposed strengthening support for eco-friendly activities to support containers, adjusting the reduction rate for passing ships, or improving the reduction and exemption application process.

• Applied Chemistry for Engineering
• /
• v.32 no.6
• /
• pp.695-699
• /
• 2021

In this study, Selective Catalytic Reduction on Diesel Particulate Filter (SDPF) after-treatment system was introduced to simultaneously remove NO_x and Particulate Matters (PM) emitted from trucks and special cargo vehicles using old engine. First, in order to select an Selective Catalytic Reduction (SCR) catalyst for SDPF, the de-NO_x performance of V/TiO₂ and Cu-Zeolite catalysts were compared, and the SCR catalyst characteristics were analyzed through Brunauer Emmett Teller (BET), X-ray Diffraction (XRD) and NH3-TPD (Temperature Programmed Desorption). From the activity test results, the Cu-zeolite catalyst showed the best thermal stability. For optimal coating of SDPF, slurry was prepared according to the target particle size. From the coating stability and back pressure test results of SDPF according to the amount of SCR coating, As a result of comparing coating stability, back pressure, and de-NOx performance by producing A, B, and C samples for each loading amount of the SDPF catalyst, the best results were found in the B sample. The engine dynamometer test was conducted for the optimal SDPF after-treatment system, and the test results satisfied Eu-5 regulations.

• Journal of Navigation and Port Research
• /
• v.33 no.10
• /
• pp.659-664
• /
• 2009

LNG carriers have, up to 2006, mainly been driven by steam turbines. The Boil-Off Gas from the LNG cargo tanks has so far been used as fuel. This is a costly solution that requires special skills during construction and operation. Alternative propulsion systems offer far better fuel economical efficiency than steam turbines. Instead of previous practice using Boil-Off Gas as a fuel, the Re-liquefaction system establishes a solution to liquefy the Boil-Off Gas and return the LNG to the cargo tanks. This Re-liquefaction of Boil-Off Gases on LNG carriers results in increased cargo deliveries and allows owners and operators to choose the most optimum propulsion system. In this study, thermodynamic cycle analysis has been performed on two type of LNG Re-liquefaction system which was designed and adopted for the Q-Flex(216,000$m^3$) and Q-Max(266,000$m^3$) LNG carrier under construction at Korea ship yards and variable key factor was simulated to compare efficiency, power and nitrogen consumption of each Re-liquefaction system.