• Journal of the Korean Geographical Society
• /
• v.32 no.1
• /
• pp.31-46
• /
• 1997

The purposes of this paper are to classify the spatial distribution types of precipitation by making daily isohyetal maps based on the winter daily precipitation and to analyse both the distributional characteristics of precipitation during the winter in South Korea and the synoptic characteristics related to them. Also, the correspondence between the spatial distribution types of precipitation and the synoptic characteristics occuring among them is examined with regards to pressure patterns and then precipitation distribution types. In addition, the characteristics of the pressure fields and temperature fields in 850hPa, 700hPa, and 500hPa level were analysed to find out the difference between the Ullung-do type and the Ullung-do${\cdot}$Honam type, which have similar characteristics on the surface weather map. As a result, the Ullung-do area showed a high frequency of occurrence regardless of precipitation classes, the East Coast area revealed a higher frequency of occurrence in over the 5mm section, while the Honam area had high frequency of occurrence in the 1~5mm section. There are twelve distribution types of precipitation during the winter. These distribution types show clear changes according to the season. The difference in precipitation distribution between the Ullung-do type and the Ullung-do${\cdot}$Honam type has a close relationship with the aspect of the upper cold air advection rather than the direction and the speed of the wind.

• Spatial Information Research
• /
• v.18 no.4
• /
• pp.1-11
• /
• 2010

Unlike the previous studies which have focused on 2-dimensional urban characteristics, this paper presents statistical models explaining urban heat island(UHI) effect by 3-dimensional urban morphologic information and addresses its policy implications. 3~dimensional informations of Columbus, Ohio arc captured from LiDAR data and building boundary informations are extracted from a building digital map, Finally NDV[ and temperature data are calculated by manipulating band 3, band 4, and thermal hand of LandSat images. Through complicated data processing, 6 independent variables(building surface area, building volume, height to width ratio, porosity, plan surface area) are introduced in simple and multiple linear regression models. The regression models are specified by Box-Tidwell method, finding the power to which the independent variable needs to raised to be in a linearity. Porosity, NDVI, and building surface area are carefully chosen as explanatory variables in the final multiple regression model, which explaining about 57% of the variability in temperatures. On reducing UHI, various implications of the results give guidelines to policy-making in open space, roof garden, and vertical garden management.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.17 no.6
• /
• pp.17-27
• /
• 2014

Wild boars are one of the major wild life animals of which the number has increased a lot because there has been any predator and/or competitor in the Korean ecosystem. The increase of their number was a cause damaging crops in farm lands during the growing season in South Korea. This study was done to recognize the spatial pattern of farm lands damaged by wild boars. Totally 2,342 farms were known damaged by wild boars in 2012, and used to statistically analyze the perspectives of the farm land damages by wild boars in ArcMap v. 9.3. Damages by wild boars frequently happened in the western part of Gyeongnam Province including Jinju city, Tongyoung city and Namhae county. Most farm lands damaged were located nearby large mountains in this area. It might cause the number of wild boars increased in this area, which could finally stimulate the increase of farm land damaged by the species. Farm land damages by wild boars were also coincident with the preference of wild boars on their food. They preferred crops (e.g., sweet potato and corn) in uplands and rice paddies and orchards. The reason of their preference on rice, upland crops and fruits was related to the efficiency of their getting much more energy in a unit area. Another reason for the species to come into a rice paddy would be that they enjoy mud bath in there for scraping off parasites such as ticks and lice. Wild boars were seemed much overcrowded during the period from July to October when most of crops and fruits get ripen. About three-quarters of total farm land damages happened in this period. This analysis also said that 1,915 fields (81.8% of total targets) appeared within the 100-meter buffer from boundaries of mountain areas. This meant that wild boars were more sensitive to the anthropogenic land uses than we expected. They seemed to conservatively try their feeding activities in farm lands with paying attention to the human activity.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.13 no.3
• /
• pp.102-118
• /
• 2010

Since hills are transitional area between plains and mountains, they are always under pressure to be developed. In the past, hills were recognized as areas that can be developed easily, but in the present they should be considered and preserved as forest resources. So far, little research has been done regarding cultivation status and transitional procedure. This study attempts to quantify changes in land use using time series data. To do so, this study has created a land use map for 1915, 1972, 2002 and 2006, and conducted a spatial analysis based on GIS. The research areas(the total size of the hills are 3,034 ha) are located in Chungcheongnam-do of South Korea. The size of the forest area of the hills in the research zone has decreased by 50% during the period of 1915 to 2006. The size of the reduced forest area after 2002 is similar to size of the reduced area that had taken place for the last 30 years before 2002. The reduction in forest area in the research area has led to increases in paddy field, upland field, artificial structures, and bare land. From 1915 to the late 1980s, hill development had been related to the primary industry and after the late 1980s, it has associated with the development of the secondary industry including industrial complex.

• Journal of Korean Society of Disaster and Security
• /
• v.13 no.2
• /
• pp.53-63
• /
• 2020

In this study, the two-dimensional flow analysis model Hydro_AS-2D model was used to simulate the situation of flooding in Seongsangu and Uichang-gu in Changwon in the event of rising sea levels and extreme flooding, and the results were expressed on three-dimensional topography and the optimal evacuation path was derived using BIM technology. Climate change significantly affects two factors in terms of flood damage: rising sea levels and increasing extreme rainfall ideas. The rise in sea level itself can not only have the effect of flooding coastal areas and causing flooding, but it also raises the base flood level of the stream, causing the rise of the flood level throughout the stream. In this study, the rise of sea level by climate change, the rise of sea level by storm tidal wave by typhoon, and the extreme rainfall by typhoon were set as simulated conditions. The three-dimensional spatial information of the entire basin was constructed using the information of topographical space in Changwon and the information of the river crossing in the basic plan for river refurbishment. Using BIM technology, the target area was constructed as a three-dimensional urban information model that had information such as the building's height and location of the shelter on top of the three-dimensional topographical information, and the results of the numerical model were expressed on this model and used for analysis for evacuation planning. In the event of flooding, the escape route is determined by an algorithm that sets the path to the shelter according to changes in the inundation range over time, and the set path is expressed on intuitive three-dimensional spatial information and provided to the user.

• Journal of Korea Spatial Information System Society
• /
• v.3 no.2 s.6
• /
• pp.5-19
• /
• 2001

We are able to construct and utilize DEM(Digital Elevation Model) throughout the NGIS(National Geographic Information System) project. It is important that interpolation methods and appreciate size of grid for the construction of accurate DEM(Digital Elevation Model). There were several references related to the DEM(Digital Elevation Model) construction method, however they couldn't consider various topographical characteristics in the korea. In this study, we recommended that suitable interpolation method for each topographic element. After dividing Poonggi area into mountain, hill, urban, agricultural land, we constructed DEM(Digital Elevation Model) with various interpolation methods and grid size using 1:5,000 digital map. Then evaluated accuracy using elevation data which extracted from air-photo. The interpolation methods were analyzed and compared for various topographical conditions. As a result, Kriging method was superior to TIN method for all the topographical conditions. Another experiment was performed to examine optimal grid space for DEM with each topographical condition. 10m grid space was most suitable for mountain area and hilly districts, while 30m grid space was most suitable for urban area and farm land.

• Journal of Korea Spatial Information System Society
• /
• v.2 no.2 s.4
• /
• pp.25-37
• /
• 2000

As computer systems of high capacity and high performance recently emerged, various researches about GISs(Geographic Information Systems) have been in progress and many GIS applications have also been developed. From the domestic situation where many people are using mobile devices, because of the recent advances in the mobile technology, we can infer that the time will come when every individual will carry a mobile device with a GPS(Global Positioning System) module resulting from the development of a miniature GPS Module. Therefore, a mobile GIS that can allows users to deal with dynamic GIS data management and perform their tasks while moving will be required. This paper discusses the design and implementation of a mobile GIS using the shareware DBMS, called postgresSQL. The Mobile GIS in which a mobile concept is utilized at the GIS data server makes it possible to insert, delete, update GIS data, to zoom in and zoom out displayed maps, and to locate the user's position on the client device. Therefore, It is possible to manage dynamic GIS data in order to deal with GIS data on the maps while moving, connect various GIS data servers through the middleware, and connected with ITS (Intelligent Transport System) which is one of applications of the Mobile GIS developed in this paper.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.40 no.2
• /
• pp.257-264
• /
• 2020

Vectorization is currently the main method in feature collection (extraction) during digital mapping using UAV-Photogrammetry. However, this method is time consuming and prone to gross elevation errors when extracted from a DSM (Digital Surface Model), because three-dimensional feature coordinates are vectorized separately: plane information from an orthophoto and height from a DSM. Consequently, the demand for stereo plotting method capable of acquiring three- dimensional spatial information simultaneously is increasing. However, this method requires an expensive equipment, a Digital Photogrammetry Workstation (DPW), and the technology itself is still incomplete. In this paper, we evaluated the accuracy of low-cost stereo plotting system, Menci's StereoCAD, by analyzing its three-dimensional spatial information acquisition. Images were taken with a FC 6310 camera mounted on a Phantom4 pro at a 90 m altitude with a Ground Sample Distance (GSD) of 3 cm. The accuracy analysis was performed by comparing differences in coordinates between the results from the ground survey and the stereo plotting at check points, and also at the corner points by layers. The results showed that the Root Mean Square Error (RMSE) at check points was 0.048 m for horizontal and 0.078 m for vertical coordinates, respectively, and for different layers, it ranged from 0.104 m to 0.127 m for horizontal and 0.086 m to 0.092 m for vertical coordinates, respectively. In conclusion, the results showed 1: 1,000 digital topographic map can be generated using a stereo plotting system with UAV images.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.4
• /
• pp.269-275
• /
• 2013

Recently, importance of pedestrian road network is getting emphasized as it is possible to provide mobile device users with both route guidance services and surrounding spatial information. However, it costs a tremendous amount of budget for generating and renovating pedestrian road network nationally, which hinder further advances of these services. Hence, algorithms extracting pedestrian road network automatically based on raster data are needed. On the other hand, road dataset generated from raster data usually has unnecessary vertices which lead to maintenance disutility such as excessive turns and increase in data memory. Therefore, this study proposed a method of selecting a proper threshold automatically for separate road entity using not only Douglas-Peucker algorithm but also road attribute data of digital map in order to remove redundant vertices, which maximizes line simplification efficiency and minimizes distortion of shape of roads simultaneously. As a result of the test, proposed method was suitable for automatic line simplification in terms of reduction ratio of vertices and accuracy of position.

• Journal of the Korean association of regional geographers
• /
• v.3 no.2
• /
• pp.195-208
• /
• 1997

On the basis of the topographic maps in the 1910's and 1990's and the classification map of Landsat TM satellite image photographed on Sept 1, 1996, the spatial distribution and the current situation concerning tidal flats in Korea were studied by measuring the area with GIS Arc/Info system and examining the regional condition required to develop the tidal flats. The results are as follow; The tidal flat resources in Korea cover an area of about 3800 square meters, including the reclaimed one since the 1910's. And they are widely distributed in the west coast of South Jeonla, Kyunggi bay, Asan bay, the south coast of South Jeonla, Kunsan bay, Chunsoo bay, and the coast of South Kyungsang and Pusan when put in the order from bigger area. Given the area under the construction at present, more than 50% of the tidal flats are reclaimed ones. The tidal flats are being developed especially in Kyunggi and Asan bays because they perfectly measure up to the conditions required. For Kunsan bay, a remarkably good supply system of the alluvial sedimentary materials and a favorable coastline requirement for the coast of the South Jeonla also contribute to the development of the tidal flats. In the case study of Kunsan bay, it was shown that the shape of the tidal flat is making a continuous change and the area is getting bigger in terms of the multi-temporal change of the tidal flat development. However, while in the first half of the 20th century, the increasing rate of the area was considered to be rather high, it is considerably lowered almost to a standstill in the latter half of the century.