• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.344-347
• /
• 2008

Ocean surface waves may be modified by ocean current and their observation may be severely distorted if the observer is on a moving platform with changing speed. Tidal current near a sill varies inversely with the water depth, and results spatially inhomogeneous modulation on the surface waves near the sill. For waves propagating upstream, they will encounter stronger current before reaching the sill, and therefore, they will shorten their wavelength with frequency unchanged, increase its amplitude, and it may break if the wave height is larger than 1/7 of the wavelength. These small scale (${\sim}$ 1 km changes is not suitable for satellite radar observation. Spatial distribution of wave-height spectra S(x, y) can not be acquired from wave gauges that are designed for collecting 2-D wave spectra at fixed locations, nor from satellite radar image which is more suitable for observing long swells. Optical images collected from cameras on-board a ship, over high-ground, or onboard an unmanned auto-piloting vehicle (UAV) may have pixel size that is small enough to resolve decimeter-scale short gravity waves. If diffuse sky light is the only source of lighting and it is uniform in camera-viewing directions, then the image intensity is proportional to the surface reflectance R(x, y) of diffuse light, and R is directly related to the surface slope. The slope spectrum and wave-height spectra S(x, y) may then be derived from R(x, y). The results are compared with the in situ measurement of wave spectra over Keelung Sill from a research vessel. The application of this method is for analysis and interpretation of satellite images on studies of current and wave interaction that often require fine scale information of wave-height spectra S(x, y) that changes dynamically with time and space.

• Journal of the Optical Society of Korea
• /
• 제19권5호
• /
• pp.487-493
• /
• 2015

A wavefront coding (WFC) technique provides an extension of the depth of field for a microscopy imaging system with slight loss of image spatial resolution. Through the analysis of the relationship between the incidence angle of light at the phase mask and the system pupil function, a mixing symmetrical cubic phase mask (CPM) applied to 5X-40X micro-objectives is optimized simultaneously based on point-spread function (PSF) invariance and nonzero mean values of the modulation transfer function (MTF) near the spatial cut-off frequency. Optimization results of the CPM show that the depth of field of these micro-objectives is extended 3-10 times respectively while keeping their resolution. Further imaging simulations also prove its ability in enhancing the defocus imaging.

• Current Optics and Photonics
• /
• 제4권4호
• /
• pp.286-292
• /
• 2020

Imaging through multicore fiber (MCF) is of great significance in the biomedical domain. Although several techniques have been developed to image an object from a signal passing through MCF, these methods are strongly dependent on the surroundings, such as vibration and the temperature fluctuation of the fiber's environment. In this paper, we apply a new, strong technique called deep learning to reconstruct the phase image through a MCF in which each core is multimode. To evaluate the network, we employ the binary cross-entropy as the loss function of a convolutional neural network (CNN) with improved U-net structure. The high-quality reconstruction of input objects upon spatial light modulation (SLM) can be realized from the speckle patterns of intensity that contain the information about the objects. Moreover, we study the effect of MCF length on image recovery. It is shown that the shorter the fiber, the better the imaging quality. Based on our findings, MCF may have applications in fields such as endoscopic imaging and optical communication.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.454-454
• /
• 2007

Eye Glass Display (EGD) with microdisplay to realize the virtual display can make the large screen, so virtual image has been developed by using microdisplay panel. This paper shows study of spherical prism lens design and manufacture of a small size and light weigh EGD with 0.59" OLED panel. Code V is used and it designed an aspherical prism lens about eye relief 25mm and 42 degree of filed of view (FOV). With the application this aspheric prism lens to OLED type's microdisplay, virtual image showed 60 inch at 2m. It had less than 2% of distortion value and modulation transfer function in axial had 30% of resolution with 32 lp/mm spatial frequency. We made an injection molding bases to lens designed.

• 한국통신학회논문지
• /
• 제12권1호
• /
• pp.9-18
• /
• 1987

DPCM의 선형예측기를 비감광성 원소(dummy pixel)를 가지고 있는 선형 감광성 전하결합소자(CCD)를 광전자 시스템으로 구현하는 방법을 제시하였다. 종래의 시스템과 마찬가지로 이 시스템은 입력광원, 공간여파기(마스크), 선형감광성 CCD의 3부분으로 구성되었다. 비감광성 원소에 의한 시간지연을 고려하여 종래의 마스크를 변형하여 각 예측계수를 하나 이상의 마스크 원소에 분산시킨, 새로운 방식의 분산형 마스크를 제시하고 이 마스크를 사용할 때의 특성을 이론적으로 분석하였으며 실험으로 확인하였다.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2000년도 제11회 정기총회 및 00년 동계학술발표회 논문집
• /
• pp.36-37
• /
• 2000

최근 Micro-Opto-Electro-Mechanical(MOEMS)기술의 발달과 더불어 적응 광학(Adaptive optics)분야나 패턴 인식 분야에 적용 가능한 공간 빛 변조기의 개발이 이루어지고 있다. 적응 광학용 공간 빛 변조기는 대기의 turbulence에 의하여 왜곡된 빛의 위상을 파면 센서(wave sensor)와 실시간 제어기를 통해 보정하는 역할을 한다. 적응 광학 분야에서 상업적으로 사용되던 기존의 공간 빛 변조기는 전왜소자 배열(piezoelectric actuator array)에 의하여 지지되는 평면 거울을 사용하여 크기가 크고 전력 소비도 심하며 무엇보다도 가격이 비싸다는 단점이 있었다$^{(1)}$ . 그러나 MOEMS 기술의 적용으로 인해 공간 빛 변조기의 크기 및 무게 그리고 소비 전력이 줄어들었으며 반도체 공정을 통한 대량 생산으로 저가로 생산할 수 있게 되었다. (중략)

• 한국광학회:학술대회논문집
• /
• 한국광학회 2003년도 제14회 정기총회 및 03년 동계학술발표회
• /
• pp.76-77
• /
• 2003

차세대 정보저장 기술중의 하나인 홀로그래픽 데이터 저장 기술은 빠른 데이터 접근속도와 기록 매질의 동일 위치에 수 천 페이지의 광정보를 중첩 기록할 수 있기 때문에 높은 저장용량을 갖는다. 이러한 홀로그래픽 데이터 저장을 위한 주요 구성으로 SLM(spatial light modulation)과 홀로그래픽 기록 매질을 들 수 있다. SLM은 전기적 신호를 광신호로 변조하기 위한 입력장치로 사용되며, 홀로그래픽 시스템에 사용되는 기록 매질은 고감도, 간단한 실시간 처리, 고회절효율, 기록 후 긴 안정성이 요구된다. (중략)

• ETRI Journal
• /
• 제41권1호
• /
• pp.10-22
• /
• 2019

Since Leith and Upatnieks demonstrated the first optical hologram in 1964, hologram technology has attracted a great deal of interest in a wide range of optical fields owing to its potential use in future optical applications such as holographic imaging and optical data storage. Although there have been considerable efforts to develop holographic technologies using conventional optics, critical issues still hinder future development. Recently, metasurfaces composed of artificially fabricated subwavelength structures have been considered as novel holographic devices that show an unprecedented ability to control electromagnetic waves. In this review, we outline the recent progress in metasurface holography. A general introduction to several types of metasurface holography categorized based on their physics and application is provided. Then, our personal perspective on the future of this field is discussed.

• 한국가스학회지
• /
• 제27권1호
• /
• pp.70-77
• /
• 2023

인체의 건강과 환경 오염으로 인해 대기환경 규제가 강화되었고 배출가스 저감 목표가 높아지면서 가스 측정법에 관한 관심이 늘어나고 있다. 측정법에는 표본 방식이 주로 사용되고 있으나 공간적 시간적 측정 한계로 인해, 실시간 In-situ 방식인 레이저 흡수분광법이 주목받고 있다. 본 연구에서는 파장 변조 분광법을 연구하였고 무보정 알고리즘에 대하여 설명하였다. 개발된 알고리즘은 46개의 다중 흡수선을 반영할 수 있도록 변경하였고 가시광선과 중적외선 영역의 광 흡수 신호 분석에 적용하였다. 추가로 레이저 변조 매개변수에 대한 차이를 분석하였고 다양한 농도 조건의 O₂, NO 가스 측정 실험을 통해 성능을 검토한 결과, 선형성은 R²_O2=0.99999, R²_NO=0.99967로 나타났다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1099-1102
• /
• 2005

In this paper, a new visual servo method, which uses 5 axis picomotor to compensate the misalignment generated between a SLM and a CCD in a holographic storage device, was proposed and the effectiveness of it was proved by the experiment. In a holographic storage device, the data processing is done by the SLM and the CCD, and the shape of data is 2 dimensional binary patterns. Therefore, the exact image matching between the SLM and the CCD is very important, and the mismatching of it causes the errors in the data reconstruction. First, the brief introduction of a holographic data storage is given, then, BER concept which is errors caused by pixel mismatch between the SLM and the CCD is defined. Second, the geometric relation between 5 axis picomotor and the CCD movement is studied. Finally, the visual servo method using 5 axis picomotor to reduce the BER in a holographic storage device is proposed and experimented. From the experiment, we find that about 3% BER improvement is obtained by the proposed method.